This is an old revision of the document!


DNS-320

This page will share some more information about the ShareCenter 2-Bay Cloud Network Storage Enclosure (DNS-320L).

Hardware

Additional to the product specifications. thumb|Front angle view of the DNS-320L

CPU Feroceon 88FR131 rev 1 (v5l)
RAM 256 MB
USB 1 USB2.0 Port (rear)
LAN Unknown GBe
Cooling fan (unknown, probably similar to ADDA AD045HB-G73)
Kernel 2.6.31.8 #1 armv5tel
Samba 3.5.15
C library gcc-4.3-mt-1.44.0


Reviews & Tutorials
/proc/cpuinfo
Processor       : Feroceon 88FR131 rev 1 (v5l)
BogoMIPS        : 999.42
Features        : swp half thumb fastmult edsp
CPU implementer : 0x56
CPU architecture: 5TE
CPU variant     : 0x2
CPU part        : 0x131
Hardware        : Feroceon-KW
CPU revision    : 0000
Serial          : 0000000000000000


cat /proc/meminfo
MemTotal:         248416 kB
MemFree:            4204 kB
Buffers:          147548 kB
Cached:            49652 kB
SwapCached:         1700 kB
Active:            68956 kB
Inactive:          94556 kB
Active(anon):       1080 kB
Inactive(anon):     3488 kB
Active(file):      67876 kB
Inactive(file):    91068 kB
Unevictable:       38212 kB
Mlocked:               0 kB
SwapTotal:        524216 kB
SwapFree:         513548 kB
Dirty:                 0 kB
Writeback:             0 kB
AnonPages:          3612 kB
Mapped:             4636 kB
Slab:              29920 kB
SReclaimable:      19864 kB
SUnreclaim:        10056 kB
PageTables:          660 kB
NFS_Unstable:          0 kB
Bounce:                0 kB
WritebackTmp:          0 kB
CommitLimit:      648424 kB
Committed_AS:      55752 kB
VmallocTotal:     385024 kB
VmallocUsed:         660 kB
VmallocChunk:     382892 kB

Serial PIN Layout

Unknown, may be similar to DNS-320.

Serial console boot messages

Unknown, may be similar to DNS-320.

Below is a dump of dmesg output:

Linux version 2.6.31.8 (jack@swtest6) (gcc version 4.3.2 (sdk3.3-ct-ng-1.4.1) ) #1 Wed Aug 22 16:55:05 CST 2012
CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977
CPU: VIVT data cache, VIVT instruction cache
Machine: Feroceon-KW
Using UBoot passing parameters structure
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 65536
free_area_init_node: node 0, pgdat c053015c, node_mem_map c0558000
 Normal zone: 512 pages used for memmap
 Normal zone: 0 pages reserved
 Normal zone: 65024 pages, LIFO batch:15
Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 65024
Kernel command line: root=/dev/ram console=ttyS0,115200 :::DB88FXX81:egiga0:none
PID hash table entries: 1024 (order: 10, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 256MB = 256MB total
Memory: 246272KB available (4960K code, 334K data, 136K init, 0K highmem)
Hierarchical RCU implementation.
NR_IRQS:128
Console: colour dummy device 80x30
Calibrating delay loop... 999.42 BogoMIPS (lpj=4997120)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
Feroceon L2: Enabling L2
Feroceon L2: Cache support initialised.

Setting up ffp

The instructions for the DNS-320 and DNS-325 seem to work fine for the DNS-320L:

http://nas-tweaks.net/371/hdd-installation-of-the-fun_plug-0-7-on-nas-devices/

This device mounts the first drive as /mnt/HD/HD_a2, similarly with the DNS-320.

Once installed and running you might want to set-up ssh and change the root password. (for example this)

USB drives seem to be automounted on boot in most cases, however it this does not happen, it seems to be updated by running 'smbd reload' on the device under Telnet or SSH, and seems to mount the drives under /mnt/USB/USB_a1 /mnt/USB/USB_b2, etc

Initial info contributed by RedScourge on 10th March 2015.


Navigation

Personal Tools