Differences

This shows you the differences between the selected revision and the current version of the page.

dns-325 2011/01/15 01:38 dns-325 2020/04/25 18:23 current
Line 1: Line 1:
====== DNS-325 ====== ====== DNS-325 ======
-This page will share some more information about the ShareCenter Shadow(DNS-325)].\\+This page will share some more information about the ShareCenter Shadow(DNS-325).\\ 
 + 
 + 
 + 
 + 
 + 
===== Hardware ===== ===== Hardware =====
-Additional to the product specifications.{{ dns-320.png|Front view of the DNS-320}}+Additional to the product specifications.{{ dns-325.png|Front view of the DNS-325}}
^ CPU | 1.2 GHz Marvell 88F6281 (Kirkwood) | ^ CPU | 1.2 GHz Marvell 88F6281 (Kirkwood) |
-^ RAM | 128 MB |+^ RAM | 256 MB |
^ USB | 1 USB2.0 Port (Rear) | ^ USB | 1 USB2.0 Port (Rear) |
^ LAN | Marvell 88E1118R-NNC1 | ^ LAN | Marvell 88E1118R-NNC1 |
-^ Cooling | Speed controlled 40mm fan ? (verifying) | +^ Cooling | [[hardware:fan|ADDA AD045HB-G73]] | 
-^ Kernel | 2.6.22.7 |+^ Kernel | 2.6.22.18 |
^ Samba | 3.2.8 | ^ Samba | 3.2.8 |
^ C library | gcc-4.2-glibc-2.5 | ^ C library | gcc-4.2-glibc-2.5 |
 +\\
 +
 +== Reviews & Tutorials ==
 +  * [[http://nas-tweaks.net/devices/d-link-dns-325/|DNS-325 on NAS-Tweaks.net]]
 +  * [[http://nas-tweaks.net/40/installation-of-the-fonz-funplug-0-5-for-ch3snas-ch3mnas-dns-323-and-many-more/|Installation of fun_plug 0.5]]
 +  * [[http://www.smallnetbuilder.com/nas/nas-reviews/31480-d-link-dns-325-2-bay-sharecenter-network-storage-reviewed|Review of DNS-325, with internal pictures.]]
 +  * [[https://jamie.lentin.co.uk/devices/dlink-dns325/|Replacing firmware with Debian Linux]]
 +
 +===== Serial PIN Layout =====
 +
 +BusyBox break-in code is still 5784468. To enter u-boot prompt, press (space) and 1 when it says "press any key".
 +
 +Jumper: JP1\\
 +TX  [5]\\
 +GND  [4]\\
 +VD33 [3]\\
 +(gap)\\
 +RX  [1]\\
\\ \\
Line 43: Line 67:
\\ \\
 +== cat /proc/meminfo ==
 +<code>
 +MemTotal:      255472 kB
 +MemFree:          3160 kB
 +Buffers:        11804 kB
 +Cached:        144152 kB
 +SwapCached:          0 kB
 +Active:        138732 kB
 +Inactive:        95324 kB
 +SwapTotal:      530040 kB
 +SwapFree:      530040 kB
 +Dirty:            3836 kB
 +Writeback:          0 kB
 +AnonPages:      78116 kB
 +Mapped:          16756 kB
 +Slab:            14068 kB
 +SReclaimable:    2632 kB
 +SUnreclaim:      11436 kB
 +PageTables:        836 kB
 +NFS_Unstable:        0 kB
 +Bounce:              0 kB
 +CommitLimit:    657776 kB
 +Committed_AS:  188844 kB
 +VmallocTotal:  385024 kB
 +VmallocUsed:      1284 kB
 +VmallocChunk:  383736 kB
 +</code>
 +\\
 +
 +== DMESG Output ==
 +<code>Linux version 2.6.22.18 (jack@SWTEST1) (gcc version 4.2.1) #14 Mon Nov 1 22:16:19 CST 2010
 +CPU: ARM926EJ-S [56251311] revision 1 (ARMv5TE), cr=00053977
 +Machine: Feroceon-KW
 +Using UBoot passing parameters structure
 +Memory policy: ECC disabled, Data cache writeback
 +On node 0 totalpages: 65536
 +  DMA zone: 512 pages used for memmap
 +  DMA zone: 0 pages reserved
 +  DMA zone: 65024 pages, LIFO batch:15
 +  Normal zone: 0 pages used for memmap
 +CPU0: D VIVT write-back cache
 +CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
 +CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
 +Built 1 zonelists.  Total pages: 65024
 +Kernel command line: root=/dev/ram console=ttyS0,115200 :::DB88FXX81:egiga0:none
 +PID hash table entries: 1024 (order: 10, 4096 bytes)
 +Console: colour dummy device 80x30
 +Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
 +Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
 +Memory: 256MB 0MB 0MB 0MB = 256MB total
 +Memory: 253696KB available (4128K code, 251K data, 124K init)
 +Calibrating delay loop... 1196.03 BogoMIPS (lpj=5980160)
 +Mount-cache hash table entries: 512
 +CPU: Testing write buffer coherency: ok
 +NET: Registered protocol family 16
 +
 +CPU Interface
 +-------------
 +SDRAM_CS0 ....base 00000000, size 256MB
 +SDRAM_CS1 ....base 10000000, size 256MB
 +SDRAM_CS2 ....disable
 +SDRAM_CS3 ....disable
 +PEX0_MEM ....base e8000000, size 128MB
 +PEX0_IO ....base f2000000, size  1MB
 +INTER_REGS ....base f1000000, size  1MB
 +NFLASH_CS ....base fa000000, size  2MB
 +SPI_CS ....base f4000000, size  16MB
 +BOOT_ROM_CS ....no such
 +DEV_BOOTCS ....no such
 +CRYPT_ENG ....base f0000000, size  2MB
 +
 +  Marvell Development Board (LSP Version KW_LSP_4.3.4_patch30)-- DB-88F6281A-BP  Soc: 88F6281 A1 LE
 +
 + Detected Tclk 200000000 and SysClk 400000000
 +MV Buttons Device Load
 +Marvell USB EHCI Host controller #0: c06d6600
 +PEX0 interface detected no Link.
 +PCI: bus0: Fast back to back transfers enabled
 +SCSI subsystem initialized
 +usbcore: registered new interface driver usbfs
 +usbcore: registered new interface driver hub
 +usbcore: registered new device driver usb
 +NET: Registered protocol family 2
 +Time: kw_clocksource clocksource has been installed.
 +IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
 +TCP established hash table entries: 8192 (order: 4, 65536 bytes)
 +TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
 +TCP: Hash tables configured (established 8192 bind 8192)
 +TCP reno registered
 +checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
 +Freeing initrd memory: 1527K
 +cpufreq: Init kirkwood cpufreq driver
 +cpufreq: High frequency: 1200000KHz - Low frequency: 400000KHz
 +cpufreq: Setting CPU Frequency to 1200000 KHz
 +cpufreq: Setting PowerSaveState to off
 +XOR registered 1 NET_DMA over 4 channels
 +XOR 2nd invalidate WA enabled
 +cesadev_init(c00119d8)
 +mvCesaInit: sessions=640, queue=64, pSram=f0000000
 +Warning: TS unit is powered off.
 +MV Buttons Driver Load
 +VFS: Disk quotas dquot_6.5.1
 +Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
 +squashfs: version 3.3 (2007/10/31) Phillip Lougher
 +squashfs: LZMA suppport for slax.org by jro
 +Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
 +JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
 +SGI XFS with large block numbers, no debug enabled
 +io scheduler noop registered
 +io scheduler anticipatory registered (default)
 +Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 4 ports, IRQ sharing disabled
 +serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
 +serial8250.0: ttyS1 at MMIO 0xf1012100 (irq = 34) is a 16550A
 +RAMDISK driver initialized: 16 RAM disks of 10240K size 1024 blocksize
 +loop: module loaded
 +Loading Marvell Ethernet Driver:
 +  o Cached descriptors in DRAM
 +  o DRAM SW cache-coherency
 +  o Single RX Queue support - ETH_DEF_RXQ=0
 +  o Single TX Queue support - ETH_DEF_TXQ=0
 +  o TCP segmentation offload enabled
 +  o LRO support supported
 +  o Receive checksum offload enabled
 +  o Transmit checksum offload enabled
 +  o Network Fast Processing (Routing) supported
 +  o Driver ERROR statistics enabled
 +  o Driver INFO statistics enabled
 +  o Proc tool API enabled
 +  o SKB Reuse supported
 +  o SKB Recycle supported
 +  o Rx descripors: q0=128
 +  o Tx descripors: q0=532
 +  o Loading network interface(s):
 +    o  register under egiga0 platform
 +    o egiga0, ifindex = 1, GbE port = 0
 +
 +Warning: Giga 1 is Powered Off
 +
 +mvFpRuleDb (cfef2000): 2048 entries, 8192 bytes
 +Integrated Sata device found
 +scsi0 : Marvell SCSI to SATA adapter
 +scsi1 : Marvell SCSI to SATA adapter
 +scsi 0:0:0:0: Direct-Access    WDC      WD10EALS-00Z8A0  05.0 PQ: 0 ANSI: 5
 +scsi 1:0:0:0: Direct-Access    WDC      WD10EALS-00Z8A0  05.0 PQ: 0 ANSI: 5
 +scsi 0:0:0:0: Attached scsi generic sg0 type 0
 +scsi 1:0:0:0: Attached scsi generic sg1 type 0
 +NFTL driver: nftlcore.c $Revision: 1.1.1.1 $, nftlmount.c $Revision: 1.1.1.1 $
 +NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit)
 +Scanning device for bad blocks
 +Bad eraseblock 964 at 0x07880000
 +Using static partition definition
 +Creating 6 MTD partitions on "nand_mtd":
 +0x00000000-0x00100000 : "u-boot"
 +0x00100000-0x00600000 : "uImage"
 +0x00600000-0x00b00000 : "ramdisk"
 +0x00b00000-0x07100000 : "image"
 +0x07100000-0x07b00000 : "mini firmware"
 +0x07b00000-0x08000000 : "config"
 +ehci_marvell ehci_marvell.70059: Marvell Orion EHCI
 +ehci_marvell ehci_marvell.70059: new USB bus registered, assigned bus number 1
 +ehci_marvell ehci_marvell.70059: irq 19, io base 0xf1050100
 +ehci_marvell ehci_marvell.70059: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
 +usb usb1: configuration #1 chosen from 1 choice
 +hub 1-0:1.0: USB hub found
 +hub 1-0:1.0: 1 port detected
 +ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
 +USB Universal Host Controller Interface driver v3.0
 +mice: PS/2 mouse device common for all mice
 +i2c /dev entries driver
 +md: linear personality registered for level -1
 +md: raid0 personality registered for level 0
 +md: raid1 personality registered for level 1
 +device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
 +dm_crypt using the OCF package.
 +cpufreq: Setting CPU Frequency to 1200000 KHz
 +cpufreq: Setting PowerSaveState to off
 +usbcore: registered new interface driver usbhid
 +drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
 +TCP cubic registered
 +NET: Registered protocol family 1
 +NET: Registered protocol family 17
 +md: Autodetecting RAID arrays.
 +md: autorun ...
 +md: ... autorun DONE.
 +RAMDISK: Compressed image found at block 0
 +VFS: Mounted root (ext2 filesystem).
 +Freeing init memory: 124K
 +sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB)
 +sd 0:0:0:0: [sda] Write Protect is off
 +sd 0:0:0:0: [sda] Mode Sense: 23 00 10 00
 +sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
 +sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB)
 +sd 0:0:0:0: [sda] Write Protect is off
 +sd 0:0:0:0: [sda] Mode Sense: 23 00 10 00
 +sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
 + sda: sda1 sda2 sda4
 +sd 0:0:0:0: [sda] Attached SCSI disk
 +sd 1:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB)
 +sd 1:0:0:0: [sdb] Write Protect is off
 +sd 1:0:0:0: [sdb] Mode Sense: 23 00 10 00
 +sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
 +sd 1:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB)
 +sd 1:0:0:0: [sdb] Write Protect is off
 +sd 1:0:0:0: [sdb] Mode Sense: 23 00 10 00
 +sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
 + sdb: sdb1 sdb2 sdb4
 +sd 1:0:0:0: [sdb] Attached SCSI disk
 +usbcore: registered new interface driver usblp
 +drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
 +egiga0: mac address changed
 +egiga0: link down
 +egiga0: started
 +egiga0: link up, full duplex, speed 1 Gbps
 +ext3: No journal on filesystem on sda4
 +EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
 +ext3: No journal on filesystem on sdb4
 +EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
 +md: md0 stopped.
 +md: bind<sdb1>
 +md: bind<sda1>
 +raid1: raid set md0 active with 2 out of 2 mirrors
 +md: md1 stopped.
 +md: bind<sdb2>
 +md: bind<sda2>
 +md1: setting max_sectors to 128, segment boundary to 32767
 +raid0: looking at sda2
 +raid0:  comparing sda2(974119296) with sda2(974119296)
 +raid0:  END
 +raid0:  ==> UNIQUE
 +raid0: 1 zones
 +raid0: looking at sdb2
 +raid0:  comparing sdb2(974119296) with sda2(974119296)
 +raid0:  EQUAL
 +raid0: FINAL 1 zones
 +raid0: done.
 +raid0 : md_size is 1948238592 blocks.
 +raid0 : conf->hash_spacing is 1948238592 blocks.
 +raid0 : nb_zone is 1.
 +raid0 : Allocating 4 bytes for hash.
 +kjournald starting.  Commit interval 5 seconds
 +EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
 +EXT3 FS on md1, internal journal
 +EXT3-fs: mounted filesystem with ordered data mode.
 +Adding 530040k swap on /dev/md0.  Priority:-1 extents:1 across:530040k
 +Initializing USB Mass Storage driver...
 +usbcore: registered new interface driver usb-storage
 +USB Mass Storage support registered.
 +NTFS driver 2.1.28 [Flags: R/O MODULE].
 +usbcore: deregistering interface driver usb-storage
 +</code>
 +\\
 +
 +== U-Boot Output ==
 +<code>
 + ** MARVELL BOARD: DB-88F6281A-BP LE
 +
 +U-Boot 1.1.4 (Oct 29 2010 - 10:41:41) Marvell version: 3.4.14.DNS-325.01
 +
 +U-Boot code: 00600000 -> 0067FFF0  BSS: -> 006CEE80
 +
 +Soc: MV88F6281 Rev 3 (DDR2)
 +CPU running @ 1200Mhz L2 running @ 400Mhz
 +SysClock = 400Mhz , TClock = 200Mhz
 +
 +DRAM CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6
 +DRAM CS[0] base 0x00000000  size 256MB
 +DRAM Total size 256MB  16bit width
 +Flash:  0 kB
 +Addresses 8M - 0M are saved for the U-Boot usage.
 +Mem malloc Initialization (8M - 7M): Done
 +NAND:128 MB
 +
 +CPU : Marvell Feroceon (Rev 1)
 +
 +Streaming disabled
 +Write allocate disabled
 +
 +
 +USB 0: host mode
 +PEX 0: interface detected no Link.
 +Net:  egiga0 [PRIME]
 +Hit any key to stop autoboot:  0
 +</code>
 +\\

Navigation
[Edit]
Personal Tools