Differences

This shows you the differences between the selected revision and the current version of the page.

dns-325 2011/09/29 13:06 dns-325 2017/09/06 18:38 current
Line 1: Line 1:
====== DNS-325 ====== ====== DNS-325 ======
This page will share some more information about the ShareCenter Shadow(DNS-325).\\ This page will share some more information about the ShareCenter Shadow(DNS-325).\\
 +
 +
Line 12: Line 14:
^ USB | 1 USB2.0 Port (Rear) | ^ USB | 1 USB2.0 Port (Rear) |
^ LAN | Marvell 88E1118R-NNC1 | ^ LAN | Marvell 88E1118R-NNC1 |
-^ Cooling | Speed controlled 40mm fan |+^ Cooling | [[hardware:fan|ADDA AD045HB-G73]] |
^ Kernel | 2.6.22.18 | ^ Kernel | 2.6.22.18 |
^ Samba | 3.2.8 | ^ Samba | 3.2.8 |
Line 21: Line 23:
  * [[http://nas-tweaks.net/devices/d-link-dns-325/|DNS-325 on NAS-Tweaks.net]]   * [[http://nas-tweaks.net/devices/d-link-dns-325/|DNS-325 on NAS-Tweaks.net]]
  * [[http://nas-tweaks.net/40/installation-of-the-fonz-funplug-0-5-for-ch3snas-ch3mnas-dns-323-and-many-more/|Installation of fun_plug 0.5]]   * [[http://nas-tweaks.net/40/installation-of-the-fonz-funplug-0-5-for-ch3snas-ch3mnas-dns-323-and-many-more/|Installation of fun_plug 0.5]]
 +  * [[http://www.smallnetbuilder.com/nas/nas-reviews/31480-d-link-dns-325-2-bay-sharecenter-network-storage-reviewed|Review of DNS-325, with internal pictures.]]
 +  * [[http://jamie.lentin.co.uk/devices/dlink-dns325/|Replacing firmware with Debian Linux]]
===== Serial PIN Layout ===== ===== Serial PIN Layout =====
-BusyBox break-in code is still 5784468+BusyBox break-in code is still 5784468. To enter u-boot prompt, press (space) and 1 when it says "press any key".
Jumper: JP1\\ Jumper: JP1\\
Line 311: Line 315:
NTFS driver 2.1.28 [Flags: R/O MODULE]. NTFS driver 2.1.28 [Flags: R/O MODULE].
usbcore: deregistering interface driver usb-storage usbcore: deregistering interface driver usb-storage
 +</code>
 +\\
 +
 +== U-Boot Output ==
 +<code>
 + ** MARVELL BOARD: DB-88F6281A-BP LE
 +
 +U-Boot 1.1.4 (Oct 29 2010 - 10:41:41) Marvell version: 3.4.14.DNS-325.01
 +
 +U-Boot code: 00600000 -> 0067FFF0  BSS: -> 006CEE80
 +
 +Soc: MV88F6281 Rev 3 (DDR2)
 +CPU running @ 1200Mhz L2 running @ 400Mhz
 +SysClock = 400Mhz , TClock = 200Mhz
 +
 +DRAM CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6
 +DRAM CS[0] base 0x00000000  size 256MB
 +DRAM Total size 256MB  16bit width
 +Flash:  0 kB
 +Addresses 8M - 0M are saved for the U-Boot usage.
 +Mem malloc Initialization (8M - 7M): Done
 +NAND:128 MB
 +
 +CPU : Marvell Feroceon (Rev 1)
 +
 +Streaming disabled
 +Write allocate disabled
 +
 +
 +USB 0: host mode
 +PEX 0: interface detected no Link.
 +Net:  egiga0 [PRIME]
 +Hit any key to stop autoboot:  0
</code> </code>
\\ \\

Navigation

Personal Tools