Differences

This shows you the differences between the selected revision and the current version of the page.

dns-343 2011/12/23 22:58 dns-343 2017/09/06 18:38 current
Line 1: Line 1:
====== DNS-343 ====== ====== DNS-343 ======
Here we share information about the DNS-343, a.k.a. "The one with the fancy OLED screen" Here we share information about the DNS-343, a.k.a. "The one with the fancy OLED screen"
 +
 +http://images.dlink.com/new/products/DNS-343-4TB/DNS-343-4TB_front.png
===== Serial PIN Headers ===== ===== Serial PIN Headers =====
Line 217: Line 219:
No found HD</code> No found HD</code>
 +== U-Boot ==
 +<code>
 + ** LOADER **
 + ** MARVELL BOARD: DB-88F5X81-DDR1-A LE
 +
 +U-Boot 1.1.1 (Apr  1 2009 - 18:02:07) Marvell version: 2.2.2.Gandolf.02
 +
 +U-Boot code: 00200000 -> 0026FFF0  BSS: -> 0027BC8C
 +
 +Soc: 88F5281 D0 (DDR1)
 +CPU running @ 500Mhz
 +SysClock = 166Mhz , TClock = 166Mhz
 +
 +DRAM CS[0] base 0x00000000  size 128MB
 +DRAM Total size 128MB
 +[16384kB@ff000000] Flash: 16 MB
 +Addresses 4M - 0M are saved for the U-Boot usage.
 +Mem malloc Initialization (4M - 3M): Done
 +
 +CPU : ARM926 (Rev 0)
 +Streaming disabled
 +VFP initialized to Run Fast Mode.
 +
 +USB 0: host mode
 +CPU: Write allocate enabled
 +Net:  egiga0 [PRIME]
 +Hit any key to stop autoboot:  0
 +Marvell>>  printenv
 +bootargs=root=/dev/ram console=ttyS0,115200 :::DB88FXX81:egiga0:none
 +bootcmd=bootm FF040000 FF1C0000
 +baudrate=115200
 +loads_echo=0
 +ipaddr=2.66.66.1
 +serverip=2.66.66.32
 +rootpath=/mnt/ARM_FS/
 +stdin=serial
 +stdout=serial
 +stderr=serial
 +cpuName=926
 +CASset=min
 +enaMonExt=no
 +enaFlashBuf=yes
 +enaCpuStream=no
 +enaVFP=yes
 +enaWrAllo=yes
 +enaICPref=yes
 +enaDCPref=yes
 +MALLOC_len=1
 +ethprime=egiga0
 +bootargs_root=root=/dev/nfs rw
 +bootargs_end=:::DB88FXX81:egiga0:none
 +image_name=uImage
 +standalone=fsload 0x400000 $(image_name);setenv bootargs $(bootargs) root=/dev/mtdblock0 rw ip=$(ipaddr):$(serverip)$(bootargs_end); bootm 0x400000;
 +bootdelay=3
 +disaMvPnp=no
 +ethaddr=00:00:00:00:51:81
 +eth1addr=00:00:00:00:51:82
 +mvNetConfig=mv_net_config=(eth0,00:aa:bb:cc:dd:ee,0)(eth1,00:11:22:33:44:55,1:2:3:4)
 +overEthAddr=no
 +pciMode=host
 +usb0Mode=host
 +ethact=egiga0
 +Environment size: 835/4092 bytes
 +Marvell>>
 +</code>

Navigation

Personal Tools