This is an old revision of the document!

---

It appears that blue disk leds are not blinking in mainline kernels (tried 2.6.26). To fix that, you'll need to change GPIO setting in drivers/ata/sata_mv.c:

static void mv6_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio)
{
#if 0
writel(0×00000060, mmio + MV_GPIO_PORT_CTL_OFS);
#else
writel(0×00000050, mmio + MV_GPIO_PORT_CTL_OFS);
#endif
}