Differences

This shows you the differences between the selected revision and the current version of the page.

--- howto:chroot_gentoo 2007/06/02 16:35
+++ howto:chroot_gentoo 2017/09/06 17:55 current
@@ Line 3: / Line 3: @@
 ===== Files needed =====
-  * [[http://download.dsmg600.info/bzip2-1.0.3.tar.bz2|bzip2]]
+  * [[http://dns323.kood.org/downloads/bzip2-1.0.3.tar.bz2|bzip2]]
-  * [[http://download.dsmg600.info/tar-1.15.92.tar.bz2|tar]]
+  * [[http://dns323.kood.org/downloads/tar-1.15.92.tar.bz2|tar]]
-  * [[http://download.dsmg600.info/chroot-5.97.tar.bz2|chroot]]
+  * [[http://dns323.kood.org/downloads/chroot-5.97.tar.bz2|chroot]]
-  * [[ftp://ftp.linux.ee/pub/gentoo/distfiles/experimental/ppc/embedded/stages/stage3-ppc-uclibc-2005.0.tar.bz2|stage3-ppc-uclibc-2005.0]] (recommended for gentoo chroot) or [[ftp://ftp.linux.ee/pub/gentoo/distfiles/experimental/ppc/embedded/stages/stage3-ppc-uclibc-2006.1.tar.bz2|stage3-ppc-uclibc-2006.1]] (recommended for gentoo boot).
+  * [[http://ftp.eenet.ee/gentoo/experimental/ppc/embedded/stages/stage3-ppc-uclibc-2005.0.tar.bz2|stage3-ppc-uclibc-2005.0]] (recommended for gentoo chroot) or [[http://ftp.eenet.ee/gentoo/experimental/ppc/embedded/stages/stage3-ppc-uclibc-2006.1.tar.bz2|stage3-ppc-uclibc-2006.1]] (recommended for gentoo boot). Don't use 2008.0 stage because it is compiled against 2.6 kernel headers.
-  * [[ftp://ftp.linux.ee/pub/gentoo/distfiles/snapshots/portage-latest.tar.bz2|portage]]
+  * [[http://ftp.eenet.ee/gentoo/snapshots/portage-latest.tar.bz2|portage tree]]
 ===== Installing steps =====
@@ Line 14: / Line 14: @@
   - ''mkdir /mnt/HD_a2/gentoo''
   - ''cd /mnt/HD_a2/gentoo''
-  - ''/mnt/HD_a2/bzcat stage3-ppc-uclibc-2005.0.tar.bz2 | /mnt/HD_a2/tar -xvpf -''
+  - ''/mnt/HD_a2/bzcat /mnt/HD_a2/stage3-ppc-uclibc-2006.1.tar.bz2 | /mnt/HD_a2/tar -xvpf -''
   - ''cd /mnt/HD_a2/gentoo/usr''
-  - ''/mnt/HD_a2/bzcat portage-latest.tar.bz2 | /mnt/HD_a2/tar -xvf -''
+  - ''/mnt/HD_a2/bzcat /mnt/HD_a2/portage-latest.tar.bz2 | /mnt/HD_a2/tar -xvf -''
   - ''mount -o bind /dev /mnt/HD_a2/gentoo/dev''
   - ''mount -t proc none /mnt/HD_a2/gentoo/proc''
   - ''cp /etc/resolv.conf /mnt/HD_a2/gentoo/etc/''
   - ''/mnt/HD_a2/chroot /mnt/HD_a2/gentoo /bin/bash''
+  - Update [[howto:chroot_gentoo#etc_make.conf|/etc/make.conf]]
+  - Update [[howto:chroot_gentoo#etc_conf.d_net|/etc/conf.d/net]]
   - ''env-update && source /etc/profile''
   - ''rc-update add net.eth0 default''
   - ''rc-update add dropbear default''
   - ''passwd root''
-**If you did choose to use 2005.0 stage then you must update e2fsprogs!**
+  - **If you did choose to use 2005.0 stage then you must update e2fsprogs!** ''emerge e2fsprogs''
-  - ''emerge e2fsprogs''
+  - **If you are going to hddboot, always make sure that devfsd is installed!** ''emerge -pv devfsd''
-**If you did choose to use 2006.1 stage then you must unemerge udev and emerge devfsd!**
+  - **It is also recommended that you update sys-apps/baselayout package. Its needed by net configuration to change mac address.** However, by default, baselayout pulls in and builds module-init-tools with support only for 2.6 kernels. So, to allow the updated module-init-tools to be built with support for both 2.4 and 2.6 kernels: ''echo %%"sys-apps/module-init-tools      old-linux" >> %%/etc/portage/package.use''
-  - ''emerge -C udev''
+  - ''emerge sys-apps/baselayout''
-  - ''emerge devfsd''
 ==== /etc/make.conf ====
 <code>
@@ Line 37: / Line 39: @@
 LDFLAGS="-Wl,-z,relro"
 USE="-*"
-RSYNC_EXCLUDEFROM="/etc/portage/rsync_excludes"
+PORTAGE_RSYNC_EXTRA_OPTS="—exclude-from=/etc/portage/rsync_excludes"
 SYNC="rsync://rsync1.ee.gentoo.org/gentoo-portage"
 GENTOO_MIRRORS="http://ftp.linux.ee/pub/gentoo/distfiles ftp://ftp.linux.ee/pub/gentoo/distfiles"
@@ Line 54: / Line 56: @@
 net is needed only if you are going to boot gentoo using loader.o or flashed custom kernel.
 <code>
-iface_eth0=( "192.168.1.2 broadcast 192.168.1.255 netmask 255.255.255.0" )
+config_eth0=( "yourNASip netmask 255.255.255.0 broadcast yourBroadcastAddress" )
-routes_eth0=( "default via 192.168.1.1" )
+routes_eth0=( "default gw yourGatewayAddress" )
-dns_servers_eth0=( "192.168.1.1" )
+mac_eth0="yourMACaddress"
+dns_servers_eth0=( "yourDNSserverAddress" )
+</code>
+Example :
+<code>
+config_eth0=( "192.168.0.20 netmask 255.255.255.0 broadcast 192.168.0.255" )
+routes_eth0=( "default gw 192.168.0.254" )
+mac_eth0="00:15:E9:6D:22:11"
+dns_servers_eth0=( "212.20.30.40" )
 </code>
 ==== /etc/conf.d/wireless ====
 wireless is needed only if you are going to boot gentoo using loader.o or flashed custom kernel.\\
-Get new (1.1.0 BETA4) rt2500.o from [[http://download.dsmg600.info/people/sala/rt2500.o|here]].
+Get new (1.1.0 BETA4) rt2500.o from [[http://download.dsmg600.info/people/sala/rt2500.o|here]]. For more info look [[http://forum.dsmg600.info/p26074-Today-17%3A03%3A31.html#p26074|here]].
 <code>
@@ Line 122: / Line 133: @@
   - ''USE=unicode emerge links''
+==== Additional software ====
+  * [[http://dns323.kood.org/forum/t788-ntpclient-gentoo-hdd-boot-chroot.html|NTPclient]]
+  * [[http://dns323.kood.org/forum/t955-chkbutton-replacement.html|DSMG600 button and leds]]
 ===== chrooting ====
@@ Line 129: / Line 143: @@
   - ''mount -t proc none /mnt/HD_a2/gentoo/proc''
   - ''/mnt/HD_a2/chroot /mnt/HD_a2/gentoo /bin/bash''
+==== Chrooted DropBear ====
+will fail by default due to the default kernel not supporting uni98 ptys.
+Correct build:
+<code>
+EXTRA_ECONF=--disable-openpty emerge dropbear
+ </code>
+First time installation:
+<code>
+ln -s /dev/urandom /dev/random
+mkdir /etc/dropbear/
+/usr/bin/dropbearkey -t dss -f /etc/dropbear/dropbear_dss_host_key
+/usr/bin/dropbearkey -t rsa -f /etc/dropbear/dropbear_rsa_host_key
+</code>
+Auto-start from fun_plug (assuming a working busybox):
+<code>
+ln -s /mnt/HD_a2/bin/busybox /bin/chroot
+ln -s /mnt/HD_a2/bin/busybox /bin/makedevs
+cd /dev
+/bin/makedevs ptyp c 2 0 0 9
+/bin/makedevs ttyp c 3 0 0 9
+ln -s urandom random
+mount -o bind /dev /mnt/HD_a2/gentoo/dev
+mount -t proc none /mnt/HD_a2/gentoo/proc
+cp /etc/resolv.conf /mnt/HD_a2/gentoo/etc/
+/bin/chroot /mnt/HD_a2/gentoo /usr/sbin/dropbear
+</code>
 ===== Successful Gentoo boot log =====
@@ Line 279: / Line 326: @@
  * Starting local ...                                                     [ ok ]
 INIT: no more processes left in this runlevel</code>
+===== Troubleshooting =====
+  * If you can't get to the login then press ctrl+c right after /dev and sda3 is mounted.
+  * If your root file system is read-only then use ''mount -t ext3 -o rw,remount /dev/sda3 /'' to get write access.
+  * Current e2fsprogs 1.40.4 fails to build with following error: ''../../lib/libuuid.so: undefined reference to `___tls_get_addr' '' See http://bugs.gentoo.org/show_bug.cgi?id=204102 for more details. Workaround is to use version 1.40.3 by running ''echo '>=sys-fs/e2fsprogs-1.40.4' >> /etc/portage/package.mask'' before emerging.
+==== Installing an older package ====
+Current version gentoo packages may not work on DSM-G600.
+If you gets Masked packages because of unsupported EAPI or package only support kernel 2.6,
+try to install an older package by browsing to /usr/portage///category/application// or going to the CSV tree :
+[[http://sources.gentoo.org/viewcvs.py/gentoo-x86/]]
+and searching older version of the package.
+Once the version found, install it with this command :
+<code>
+emerge -av =category/package-version
+</code>
 ===== Links =====
-  * [[http://forum.dsmg600.info/t18-Gentoo-howto.html|Forum thread]]
+  * [[http://dns323.kood.org/forum/t18-Gentoo-howto.html|Forum thread]]
   * [[http://www.gentoo.org/doc/en/handbook/handbook-ppc.xml?full=1|Gentoo handbook]]

Differences

Views

Navigation

Personal Tools

Search

Toolbox