Differences

This shows you the differences between the selected revision and the current version of the page.

howto:hdd_boot 2015/11/28 07:43 howto:hdd_boot 2017/09/06 17:34 current
Line 1: Line 1:
-wimwear this summer to bmeoce the mainstream trend. Cool down, sunshine fair,together with the unique thwart-buckle create worn, immediately show a charming beauty.trunks intended to reach new heights with this dynamic.Enjoy yourself on Ed Hardy Bikini of bag, but once again the label that ed hardy and the Christian Audigier Brand ManageThe total spectrum of Audigier Brand Management lifestyle brands and crop will be         Rubber. Rubber is widly used in the outsole of the athletic shoes. It has the advantages of durable, skipproof, flexible, elastic, extensive, stable and proper hardness. PU. PU is a kind of macromolecule polyurethane materials Sometimes, it is also used in the outsole of casual shoes. PU is durable, strong hardness, upstanding flexbility and more important,+====== How to install a root file system to a Hard Disk ====== 
 + 
 + 
 +===== Getting started ===== 
 +First I want to let you know that you must have serial port installed to your DSM-G600! Also I want to let you know that getting a regular (Gentoo or Debian) linux work on DSM-G600 can be extremely hard and It is recommended that you have very good knowledge about how Gentoo and Debian really work (boot process, initrd, inittab, services, runlevels). 
 + 
 +===== Basic steps ===== 
 + 
 +  - [[howto:serial_connector|Install a serial console]] or look up [[howto:loader_o|loader.o method]] for kernel loading. 
 +  - Install [[howto:chroot_gentoo|Gentoo chroot]] or a [[howto:chroot_debian|Debian chroot]] into sda3 root. 
 +  - Get [[http://download2.polytechnic.edu.na/pub4/sourceforge/o/project/project/of/officialdlinkfirmware/DSM-G600_reB/ppclinux.tar.gz|Kernel source]]. 
 +  - Apply a kernel patch. After that your kernel is going to ignore U-Boot bootargs and you will be able to set a CONFIG_CMDLINE parameter.<code patch>--- arch/ppc/kernel/setup.c.orig        2005-04-11 05:50:07.000000000 +0300 
 ++++ arch/ppc/kernel/setup.c    2007-02-17 16:06:16.000000000 +0200 
 +@@ -607,8 +611,8 @@ 
 +        init_mm.brk = (unsigned long) klimit; 
 + 
 +        /* Save unparsed command line copy for /proc/cmdline */ 
 +-      strcpy(saved_command_line, cmd_line); 
 +-      *cmdline_p = cmd_line; 
 ++      strcpy(saved_command_line, CONFIG_CMDLINE); 
 ++      *cmdline_p = CONFIG_CMDLINE; 
 + 
 +        /* set up the bootmem stuff with available memory */ 
 +        do_init_bootmem();</code> 
 +  - Additional kernel .config entries you might want to add/change.<code>CONFIG_CMDLINE_BOOL=y 
 +CONFIG_CMDLINE="root=/dev/sda3 console=ttyS0,9600" 
 +CONFIG_DEVFS_FS=y 
 +CONFIG_UNIX=y 
 +CONFIG_FILTER=y 
 +CONFIG_UNIX98_PTYS=y 
 +CONFIG_DEVPTS_FS=y 
 +# CONFIG_NTFS_FS is not set 
 +# CONFIG_NTFS_RW is not set 
 +# CONFIG_TULIP is not set</code>If you want to also enable reiserfs then you need to disable NFS for example to get more space. Remember that maximum U-Boot formated kernel size is 936KB! 
 +  - [[howto:kernel_build|Guide for compiling kernel]]. 
 +  - [[howto:kernel_upload|Guide for uploading new kernel]] or loading it with [[howto:loader_o|loader.o]]. 
 + 
 +===== Ramdisk tips ===== 
 +By default you don't need to do nothing with ramdisk. Ramdisk will be loaded into memory as usual. 
 +To go around this problem you can boot with ''bootm FFF10000'' U-Boot parameter which will only load a kernel image. Also it may be convenient to [[howto:kernel_upload|replace]] the RAMDisk image at 0xFFC20000 by an empty U-Boot image, like [[http://www.netbsd.org/ports/sandpoint/dummy.img.gz|this]] one (do not forget to uncompress it with gunzip(1)). 
 + 
 +===== Links ===== 
 + 
 +[[http://dns323.kood.org/forum/p1549-Yesterday-082958.html#p1549|Forum thread]]\\ 
 +[[http://dns323.kood.org/forum/p1583-Today-203135.html#p1583|loader.o method without flashing]] 

Personal Tools