This is an old revision of the document!

Hi Victor,Here's a few quick commands that you can use on the ERS 8600 to<a href=“http://pndmiyjpxqm.com”> enlabe</a> SNMP v3 access (assuming you don't have an access policy restricting access).You'll need to substitute the variables in {} with your appropriate IP addressing and passwords, etc.config load-encryption-module 3DES /flash/p80c4182.imgconfig load-encryption-module AES /flash/p80c4182.aesconfig snmp-v3 usm create Manager sha auth {auth_password} priv-prot aes priv {priv_password}config snmp-v3 group-access create admin ”” usm authPrivconfig snmp-v3 group-access view admin ”” usm authPriv read root write root notify rootconfig snmp-v3 group-member create Manager usm adminconfig snmp-v3 target-addr delete TAddr1config snmp-v3 target-addr delete TAddr2config snmp-v3 target-addr create HP_OpenView {HP OPENVIEW OPENVIEW IP ADDRESS}:162 TparamV1 taglist trapTagconfig snmp-v3 usm delete initialconfig sys set snmp sender-ip {HP OPENVIEW IP ADDRESS} {CLIP INTERFACE}config sys set snmp force-trap-sender trueconfig sys set snmp force-iphdr-sender trueHopefully that should get you going Cheers!


Personal Tools