Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
Pages: 1
I installed the device yesterday and now cannot set up any shared drives in Vista. In addition, the device continues to ask for a device driver, something that I cannot find either on the dlink site or anywhere else on the net. Can anyone give me some advice on what to do?
thanks
Offline
To make it work in Vista:
NOTE...if you do anything wrong here you can destroy your operating system
Vista Home Basic or Home Premium:
Click Start
Type: regedit
Press enter
To the left, expand the folder: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\
To the left, click the folder: Lsa
To the right, doubleclick on ’ LmCompatibilityLevel’
Type the number 1 and press enter
Restart the computer
Vista Business, Enterprise eller Ultimate:
Click Start
Click on ControlPanel
Doubleclick on Administrationtools
Doubleclick on Local securityprinciples
To the left, click on the triangle at Local principles
To the left, click in Securityoptions
To the right, doubleclick on pĺ ’Network security:Autentication level for LAN Manager’
Select ’Send LM and NTLM – only use NTLMv2 – session security if this is negotiated’
Click OK
Now your Vista will connect to the device....although it is very buggy. I have given up to use this device to my Vista and would never recomend anyone to do it with the current firmware (I have upgraded to b06)
Offline
About the driver...if you tell vista not to ask you it will stop asking, this driver is nothing that you will need to have in order to map the device.
Offline
Pages: 1