DSM-G600, DNS-3xx and NSA-220 Hack Forum
Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
Announcement
IRC Channel #funplug on irc.freenode.org
#1 2009-08-19 13:04:19
- degehi
- New member
- Registered: 2009-08-19
- Posts: 3
TS-I300W configuration
Hi,
I've the opportunity to install a ts-i300w device at home but before doing this, I just to want to clarify something. Thanks for help in advance.
Is it possible to configure this device to make a link between an existing wireless network and a desktop computer via his Lan port. So something like that:
wireless dsl router <---WLAN---> ts-i330W <-----LAN-----> desktop computer.
In this way, the NAS will be visible on the wireless network and the desktop computer + offer the internet connection (available on the wireless network) to the desktop PC.
Again thanks for help. Best regards
DGI
Last edited by degehi (2009-08-19 13:04:51)
Offline
#2 2009-08-19 13:30:05
Re: TS-I300W configuration
Its not possible while using official ts-i300w features because lan and wifi is bonded together.
• DSM-G600 - NetBSD hdd-boot - 80GB Samsung SP0802N
• NSA-220 - Gentoo armv5tel 20110121 hdd-boot - 2x 2TB WD WD20EADS
Offline
#3 2009-08-19 14:00:53
- degehi
- New member
- Registered: 2009-08-19
- Posts: 3
Re: TS-I300W configuration
And the unofficial way? Or a better question: is there a way to run a "client-bridge" on the device? I mean, let the device as Access Point and make then a bridge beetween the two wifi networks.
Or any idea for doing this?
DGI
Last edited by degehi (2009-08-19 15:28:39)
Offline
#4 2009-08-19 19:47:27
Re: TS-I300W configuration
It is possible but it will need lot of work and time. Better spend some more money and buy bridge.
If you want to try then chroot your ts-i300w to some standard i386 compatible linux distro. Then you should have some tools to unbond wifi/lan interface and configure both of them as you need. You might also need to boot custom kernel or compile bridge.o
Most of all it would help a lot if you know how to configure interfaces manually from linux command line in regular pc.
• DSM-G600 - NetBSD hdd-boot - 80GB Samsung SP0802N
• NSA-220 - Gentoo armv5tel 20110121 hdd-boot - 2x 2TB WD WD20EADS
Offline
#5 2009-08-20 14:16:29
- degehi
- New member
- Registered: 2009-08-19
- Posts: 3
Re: TS-I300W configuration
Thanks sala. Sure, it will use a lot a time for a small thing.
I will see if a can found a small bridge or perhaps just use an other type of NAS....
Anyway, thanks a lot for you help
Offline