Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
Good afternoon!
I have unsuccesfully u-Boot upgrade from Marvell version 3.4.16 to 3.4.19. After power on NAS work only 18 sec, then turned off.
Can somebody make dumps of NAND sections with command (from SSH or serial console), like:
#nanddump /dev/mtd0 > /mnt/HD/HD_a2/mtd0.bin
#nanddump /dev/mtd4 > /mnt/HD/HD_a2/mtd4.bin
#nanddump /dev/mtd5 > /mnt/HD/HD_a2/mtd5.bin
I'am not sure about "nanddump" sintax for dumping into file, maybe it have special option.
Offline
Hi again!
I was able to restore a previous version of the u-boot, just the rest of the NAND were cleared.
Also, i have compiled ntfs-3g drivers (fuse.ko, ntfs-3g & libntfs-3g.so), that provide read/write acces to NTFS volumes on DNS-325. I can exchange them for dumps of mtd1...mtd5 of NAND.
nanddump /dev/mtd1 -f /mnt/HD/HD_a2/mtd1.bin
Offline