Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
Hello,
After a series of mishaps, and a couple of very close together power-outs, I nedd to check my disks, but I seem to be unable to do so.
To start, I have a 1 TB + a 2 TB drive in my 320. I set them up as a 1 TB RAID 1volume, with the remaining space as a 1 TB JBOD volume.
I tried to follow the insructions at http://www.inreto.de/dns323/fsck/, but it didn't work. it told me something about a kernel incompatibility ( i think)
To be able to fsck them, I'm booting from a USB. I believe I have unmounted both volumes, but when I try to run e2fsck, it tells me that :
# Filesystem mounted or opened exclusively by another program?
-sh: Filesystem: not found
I'm stumped.
How can I repair the FS?
Offline
elucubra wrote:
I tried to follow the insructions at http://www.inreto.de/dns323/fsck/, but it didn't work. it told me something about a kernel incompatibility ( i think)
Yes, that is true. This method is DNS323 only, unless someone ports the reloader module to the Kirkwood kernel.
I believe I have unmounted both volumes
What is the output of
cat /proc/mounts
How can I repair the FS?
Besides the way you are already trying, you could connect the disks to a Linux PC, assemble the raid array, and check them.
Offline
Sorry to hijack this thread, but I have the same issue. I am trying to check a linear raid (my /dev/md2) after I lost a drive. /dev/md2 is not mounted. Below is my /proc/mdstat. I just added the new drive back to /dev/md0 and /dev/md1. BTW, anyone know why the swap on a DNS-325 is setup as a RAID1? Thanks in advance.
Paul
Personalities : [linear] [raid0] [raid1]
md2 : active linear sda3[0]
978840384 blocks 64k rounding
md1 : active raid1 sdb2[2] sda2[0]
973629312 blocks [2/1] [U_]
[====>................] recovery = 21.9% (213806272/973629312) finish=98.9min speed=127979K/sec
md0 : active raid1 sdb1[2] sda1[0]
530048 blocks [2/1] [U_]
resync=DELAYED
unused devices: <none>
Offline