Differences

This shows you the differences between the selected revision and the current version of the page.

hardware:usb 2007/02/07 23:32 hardware:usb 2017/09/06 18:38 current
Line 3: Line 3:
=====USB Hacks/Mods===== =====USB Hacks/Mods=====
  * [[howto:external_drive|How To Mount an External USB Drive to your DNS-323]]   * [[howto:external_drive|How To Mount an External USB Drive to your DNS-323]]
-  * Forum: [[http://forum.dsmg600.info/p964-20070124-122320.html#p964|USB Hub Hookup, Multi-Device Connections!]]+  * Forum: [[http://dns323.kood.org/forum/p964-20070124-122320.html#p964|USB Hub Hookup, Multi-Device Connections!]]
=====USB Details:===== =====USB Details:=====
-  * "Marvell USB EHCI Host controller" - Source: [[http://forum.dsmg600.info/p785-20070113-150542.html#p785|magore - serial console log]]+  * "Marvell USB EHCI Host controller" - Source: [[http://dns323.kood.org/forum/p785-20070113-150542.html#p785|magore - serial console log]]
Line 18: Line 18:
=====USB Photos - In Context:===== =====USB Photos - In Context:=====
<box 50%|[[http://duplo.org/~conny/dns-323/|Disassembly pictures]]>{{:8.jpg?w=120&h=89|1 - cover off}} {{:3.jpg?w=120&h=90|2 - exterior}} {{:hardware:15.jpg?w=120&h=90|3 - on board}}</box> <box 50%|[[http://duplo.org/~conny/dns-323/|Disassembly pictures]]>{{:8.jpg?w=120&h=89|1 - cover off}} {{:3.jpg?w=120&h=90|2 - exterior}} {{:hardware:15.jpg?w=120&h=90|3 - on board}}</box>
 +
 +====== Internal USB on DNS-323 (B1 hardware) ======
 +My DNS-323 with B1 hardware has 88F5182 chip onboard. There are two usb controllers inside the chip, but the DNS-323 itself gives us access to only one controller.
 +I (bas) discovered the way to get access to the second controller. It can be used, for example, with an usb-stick.
 +
 +{{hardware:hw_b1_second_usb_01.jpg?350}}
 +
 +Detailed image
 +
 +{{hardware:hw_b1_second_usb_02.jpg?350}}
 +
 +There are two wires on the picture above. I have marked them.
 +
 +I have glued down disassembled usb-stick on the back side of the board and soldered the wires to it:
 +
 +{{hardware:hw_b1_second_usb_03.jpg?350}}
 +
 +The usb_data+ and usb_data- wires must not be too long, or your usb device will work incorrectly.
 +
 +Power source for usb device:
 +Be careful: in case of accidental short your dns-323 may become damaged.
 +
 +{{hardware:hw_b1_second_usb_04.jpg?350}}
 +
 +
 +With usb-storage.ko driver the usb-stick works fine. I am trying to install Gentoo on it.

Navigation

Personal Tools