Differences

This shows you the differences between the selected revision and the current version of the page.

howto:ffp-reloaded 2008/07/16 16:34 howto:ffp-reloaded 2017/12/04 19:31 current
Line 6: Line 6:
You should install the latest busybox package (>= 1.11.1). You should install the latest busybox package (>= 1.11.1).
 +
 +This does **not** work out-of-the-box with RAID.  You will have to know what you're doing to get it working.  See the [[#RAID Reloaded]] section for some pointers.
 +
 +For now, the supplied 2.6.25 kernel doesn't work with Rev B1, because the vanilia kernel doesn't support rev B1.  However, you can use a 2.6.12 kernel from the [[http://www.inreto.de/dns323/misc/|firmware-reloaded archive in the misc/]] section of fonz's software repository.
 +
Line 34: Line 39:
ln -s /proc/mounts ffp/etc/mtab ln -s /proc/mounts ffp/etc/mtab
mkdir -p proc sys mkdir -p proc sys
 +</code>
 +
 +NOTE: if you want to use optware afterwards you need to make sure that you are using the same libraries used with the base fun_plug. If you don't you may get (with xmail, for example) a complaint about a missing symbol in6addr_any. To resolve this, do the following:
 +
 +<code>
 +cd /lib
 +rm /mnt/HD_a2/lib # remove symbolic link created above
 +tar cf - * | (cd /mnt/HD_a2; tar xvf -)
</code> </code>
Line 66: Line 79:
uname -a uname -a
</code> </code>
 +
 +
 +
 +==== RAID Reloaded ====
 +If you don't care about the features in the D-Link firmware, and are confident with using [[http://www.inreto.de/dns323/fun-plug/0.5/|fun-plug 0.5]], you can join the "reloaded" fun using:
 +
 +  * fonz's [[http://www.inreto.de/dns323/misc/|custom 2.6.12 firmware-reloaded kernel]]
 +  * fun-plug 0.5 installed to ''/mnt/HD_a4'' **or** ''/mnt/HD_b4''  (which correspond to the ``sda4`` and ``sdb4`` partitions)
 +    * ffp-reloaded from [[http://www.inreto.de/dns323/fun-plug/0.5/extra-packages/ffp-reloaded/|extra-packages]]
 +    * mdadm.  You'll need to run the following **after** reloading:
 +<code>
 +    mdadm -A /dev/md0 /dev/sda2 /dev/sdb2
 +</code>
 +
 +Be sure to tweak ''/ffp/boot/boot.sh'' to pass ''-m 526'' to ''reload.sh''.  This is necessary when booting the 2.6.12 kernel.  Here is my ''boot.sh'':
 +
 +<code>
 +    #!/bin/sh
 +    set -x
 +    cd /ffp/boot
 +    ./reload.sh -I root=/dev/sdb4 -m 526
 +</code>
 +
 +With this setup, I have my Rev B1 DNS-323 reloading into fun-plug 0.5, with RAID1 enabled, and running the NFS **kernel** server.
 +
Line 76: Line 114:
 +  * Mijzelf made it work on the NSA-220 [[http://forum.dsmg600.info/viewtopic.php?pid=32398#p32398]]

Navigation

Personal Tools