Differences

This shows you the differences between the selected revision and the current version of the page.

howto:ffp-reloaded 2009/01/11 04:40 howto:ffp-reloaded 2017/12/04 19:31 current
Line 10: Line 10:
For now, the supplied 2.6.25 kernel doesn't work with Rev B1, because the vanilia kernel doesn't support rev B1.  However, you can use a 2.6.12 kernel from the [[http://www.inreto.de/dns323/misc/|firmware-reloaded archive in the misc/]] section of fonz's software repository. For now, the supplied 2.6.25 kernel doesn't work with Rev B1, because the vanilia kernel doesn't support rev B1.  However, you can use a 2.6.12 kernel from the [[http://www.inreto.de/dns323/misc/|firmware-reloaded archive in the misc/]] section of fonz's software repository.
 +
 +
==== Installation ==== ==== Installation ====
Line 37: Line 39:
ln -s /proc/mounts ffp/etc/mtab ln -s /proc/mounts ffp/etc/mtab
mkdir -p proc sys mkdir -p proc sys
 +</code>
 +
 +NOTE: if you want to use optware afterwards you need to make sure that you are using the same libraries used with the base fun_plug. If you don't you may get (with xmail, for example) a complaint about a missing symbol in6addr_any. To resolve this, do the following:
 +
 +<code>
 +cd /lib
 +rm /mnt/HD_a2/lib # remove symbolic link created above
 +tar cf - * | (cd /mnt/HD_a2; tar xvf -)
</code> </code>
Line 93: Line 103:
With this setup, I have my Rev B1 DNS-323 reloading into fun-plug 0.5, with RAID1 enabled, and running the NFS **kernel** server. With this setup, I have my Rev B1 DNS-323 reloading into fun-plug 0.5, with RAID1 enabled, and running the NFS **kernel** server.
 +
 +
Line 102: Line 114:
 +  * Mijzelf made it work on the NSA-220 [[http://forum.dsmg600.info/viewtopic.php?pid=32398#p32398]]

Navigation

Personal Tools