Differences

This shows you the differences between the selected revision and the current version of the page.

howto:hardware_reset 2016/12/16 12:24 howto:hardware_reset 2019/08/14 05:15 current
Line 5: Line 5:
  - Using the hardware reset button   - Using the hardware reset button
-The hardware reset button is documented in the D-Link DNS-323 Manual ver 1.2. (ftp://ftp.dlink.se/Products/dns-products/dns-323/Documentation/DNS-323_manual_12.pdf) however does not discuss how it is used.+The hardware reset button is documented in the D-Link DNS-323 Manual ver 1.4. (http://files.dlink.com.au/products/DNS-323/REV_C/Manuals/v1.4/DNS-323_MANUAL_1.40.pdf) however does not discuss how it is used.
How-to perform a hardware reset How-to perform a hardware reset
Line 25: Line 25:
__Extra Note:__ for me the hardware reset is much more simple.  Leave the 323 on and simply hold down the reset button for a few seconds.  After a short time the square light on the front will start to flash.  You can now release the reset button and you should be back to factory settings in a short while. __Extra Note:__ for me the hardware reset is much more simple.  Leave the 323 on and simply hold down the reset button for a few seconds.  After a short time the square light on the front will start to flash.  You can now release the reset button and you should be back to factory settings in a short while.
 +__Addition to the Extra Note:__ I can confirm that this simpler method worked for me on a DNS-323, hardware version C1 and firmware version 1.10
---- ----

Navigation

Personal Tools