DNS-320

This page will share some more information about the ShareCenter 2-Bay Cloud Network Storage Enclosure (DNS-320L).

Additional to the product specifications.

• DNS-320-Page on NAS-Tweaks with further Pictures
• Replacing firmware with Debian Linux

Processor       : Feroceon 88FR131 rev 1 (v5l)
BogoMIPS        : 999.42
Features        : swp half thumb fastmult edsp
CPU implementer : 0x56
CPU architecture: 5TE
CPU variant     : 0x2
CPU part        : 0x131
Hardware        : Feroceon-KW
CPU revision    : 0000
Serial          : 0000000000000000

Unknown, may be similar to DNS-320.

Unknown, may be similar to DNS-320 Below the messages sent to the serial console during the system startup, till init is started.

Below is a dump of dmesg output:

Linux version 2.6.31.8 (jack@swtest6) (gcc version 4.3.2 (sdk3.3-ct-ng-1.4.1) ) #1 Wed Aug 22 16:55:05 CST 2012
CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977
CPU: VIVT data cache, VIVT instruction cache
Machine: Feroceon-KW
Using UBoot passing parameters structure
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 65536
free_area_init_node: node 0, pgdat c053015c, node_mem_map c0558000
 Normal zone: 512 pages used for memmap
 Normal zone: 0 pages reserved
 Normal zone: 65024 pages, LIFO batch:15
Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 65024
Kernel command line: root=/dev/ram console=ttyS0,115200 :::DB88FXX81:egiga0:none
PID hash table entries: 1024 (order: 10, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 256MB = 256MB total
Memory: 246272KB available (4960K code, 334K data, 136K init, 0K highmem)
Hierarchical RCU implementation.
NR_IRQS:128
Console: colour dummy device 80x30
Calibrating delay loop... 999.42 BogoMIPS (lpj=4997120)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
Feroceon L2: Enabling L2
Feroceon L2: Cache support initialised.

The instructions for the DNS-320 and DNS-325 seem to work fine for the DNS-320L:

http://nas-tweaks.net/371/hdd-installation-of-the-fun_plug-0-7-on-nas-devices/

This device mounts the first drive as /mnt/HD/HD_a2, similarly with the DNS-320.

Once installed and running you might want to set-up ssh and change the root password. (for example this)

USB drives seem to be automounted on boot in most cases, however it this does not happen, it seems to be updated by running 'smbd reload' on the device under Telnet or SSH, and seems to mount the drives under /mnt/USB/USB_a1 /mnt/USB/USB_b2, etc

Initial info contributed by RedScourge on 10th March 2015.