Differences

This shows you the differences between the selected revision and the current version of the page.

dns-325 2012/11/03 09:55 dns-325 2020/04/25 18:23 current
Line 1: Line 1:
-Nice post, the complete site seems to be done with posisan and love!! I need some help, is related with this post..Ib4m trying to make a copy of an SD card that had raw files, itb4s from an embedded system without File system. Of course i canb4t mount it, but i know itb4s something like /dev/mmcblk0 does it need to be mounted to make the copy?? when i do fisk -l does not list mmcblk0 because has no format..Thanks Maximiliano From Argentina+====== DNS-325 ====== 
 +This page will share some more information about the ShareCenter Shadow(DNS-325).\\ 
 + 
 + 
 + 
 + 
 + 
 + 
 + 
 +===== Hardware ===== 
 +Additional to the product specifications.{{ dns-325.png|Front view of the DNS-325}} 
 + 
 +^ CPU | 1.2 GHz Marvell 88F6281 (Kirkwood) | 
 +^ RAM | 256 MB | 
 +^ USB | 1 USB2.0 Port (Rear) | 
 +^ LAN | Marvell 88E1118R-NNC1 | 
 +^ Cooling | [[hardware:fan|ADDA AD045HB-G73]] | 
 +^ Kernel | 2.6.22.18 | 
 +^ Samba | 3.2.8 | 
 +^ C library | gcc-4.2-glibc-2.5 | 
 +\\ 
 + 
 +== Reviews & Tutorials == 
 +  * [[http://nas-tweaks.net/devices/d-link-dns-325/|DNS-325 on NAS-Tweaks.net]] 
 +  * [[http://nas-tweaks.net/40/installation-of-the-fonz-funplug-0-5-for-ch3snas-ch3mnas-dns-323-and-many-more/|Installation of fun_plug 0.5]] 
 +  * [[http://www.smallnetbuilder.com/nas/nas-reviews/31480-d-link-dns-325-2-bay-sharecenter-network-storage-reviewed|Review of DNS-325, with internal pictures.]] 
 +  * [[https://jamie.lentin.co.uk/devices/dlink-dns325/|Replacing firmware with Debian Linux]] 
 + 
 +===== Serial PIN Layout ===== 
 + 
 +BusyBox break-in code is still 5784468. To enter u-boot prompt, press (space) and 1 when it says "press any key". 
 + 
 +Jumper: JP1\\ 
 +TX  [5]\\ 
 +GND  [4]\\ 
 +VD33 [3]\\ 
 +(gap)\\ 
 +RX  [1]\\ 
 +\\ 
 + 
 +== cat /proc/cpuinfo == 
 +<code>Processor      : ARM926EJ-S rev 1 (v5l) 
 +BogoMIPS        : 1196.03 
 +Features        : swp half thumb fastmult edsp 
 +CPU implementer : 0x56 
 +CPU architecture: 5TE 
 +CPU variant    : 0x2 
 +CPU part        : 0x131 
 +CPU revision    : 1 
 +Cache type      : write-back 
 +Cache clean    : cp15 c7 ops 
 +Cache lockdown  : format C 
 +Cache format    : Harvard 
 +I size          : 16384 
 +I assoc        : 4 
 +I line length  : 32 
 +I sets          : 128 
 +D size          : 16384 
 +D assoc        : 4 
 +D line length  : 32 
 +D sets          : 128 
 + 
 +Hardware        : Feroceon-KW 
 +Revision        : 0000 
 +Serial          : 0000000000000000 
 +</code> 
 +\\ 
 + 
 +== cat /proc/meminfo == 
 +<code> 
 +MemTotal:      255472 kB 
 +MemFree:          3160 kB 
 +Buffers:        11804 kB 
 +Cached:        144152 kB 
 +SwapCached:          0 kB 
 +Active:        138732 kB 
 +Inactive:        95324 kB 
 +SwapTotal:      530040 kB 
 +SwapFree:      530040 kB 
 +Dirty:            3836 kB 
 +Writeback:          0 kB 
 +AnonPages:      78116 kB 
 +Mapped:          16756 kB 
 +Slab:            14068 kB 
 +SReclaimable:    2632 kB 
 +SUnreclaim:      11436 kB 
 +PageTables:        836 kB 
 +NFS_Unstable:        0 kB 
 +Bounce:              0 kB 
 +CommitLimit:    657776 kB 
 +Committed_AS:  188844 kB 
 +VmallocTotal:  385024 kB 
 +VmallocUsed:      1284 kB 
 +VmallocChunk:  383736 kB 
 +</code> 
 +\\ 
 + 
 +== DMESG Output == 
 +<code>Linux version 2.6.22.18 (jack@SWTEST1) (gcc version 4.2.1) #14 Mon Nov 1 22:16:19 CST 2010 
 +CPU: ARM926EJ-S [56251311] revision 1 (ARMv5TE), cr=00053977 
 +Machine: Feroceon-KW 
 +Using UBoot passing parameters structure 
 +Memory policy: ECC disabled, Data cache writeback 
 +On node 0 totalpages: 65536 
 +  DMA zone: 512 pages used for memmap 
 +  DMA zone: 0 pages reserved 
 +  DMA zone: 65024 pages, LIFO batch:15 
 +  Normal zone: 0 pages used for memmap 
 +CPU0: D VIVT write-back cache 
 +CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets 
 +CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets 
 +Built 1 zonelists.  Total pages: 65024 
 +Kernel command line: root=/dev/ram console=ttyS0,115200 :::DB88FXX81:egiga0:none 
 +PID hash table entries: 1024 (order: 10, 4096 bytes) 
 +Console: colour dummy device 80x30 
 +Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) 
 +Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) 
 +Memory: 256MB 0MB 0MB 0MB = 256MB total 
 +Memory: 253696KB available (4128K code, 251K data, 124K init) 
 +Calibrating delay loop... 1196.03 BogoMIPS (lpj=5980160) 
 +Mount-cache hash table entries: 512 
 +CPU: Testing write buffer coherency: ok 
 +NET: Registered protocol family 16 
 + 
 +CPU Interface 
 +------------- 
 +SDRAM_CS0 ....base 00000000, size 256MB  
 +SDRAM_CS1 ....base 10000000, size 256MB  
 +SDRAM_CS2 ....disable 
 +SDRAM_CS3 ....disable 
 +PEX0_MEM ....base e8000000, size 128MB  
 +PEX0_IO ....base f2000000, size  1MB  
 +INTER_REGS ....base f1000000, size  1MB  
 +NFLASH_CS ....base fa000000, size  2MB  
 +SPI_CS ....base f4000000, size  16MB  
 +BOOT_ROM_CS ....no such 
 +DEV_BOOTCS ....no such 
 +CRYPT_ENG ....base f0000000, size  2MB  
 + 
 +  Marvell Development Board (LSP Version KW_LSP_4.3.4_patch30)-- DB-88F6281A-BP  Soc: 88F6281 A1 LE 
 + 
 + Detected Tclk 200000000 and SysClk 400000000  
 +MV Buttons Device Load 
 +Marvell USB EHCI Host controller #0: c06d6600 
 +PEX0 interface detected no Link. 
 +PCI: bus0: Fast back to back transfers enabled 
 +SCSI subsystem initialized 
 +usbcore: registered new interface driver usbfs 
 +usbcore: registered new interface driver hub 
 +usbcore: registered new device driver usb 
 +NET: Registered protocol family 2 
 +Time: kw_clocksource clocksource has been installed. 
 +IP route cache hash table entries: 2048 (order: 1, 8192 bytes) 
 +TCP established hash table entries: 8192 (order: 4, 65536 bytes) 
 +TCP bind hash table entries: 8192 (order: 3, 32768 bytes) 
 +TCP: Hash tables configured (established 8192 bind 8192) 
 +TCP reno registered 
 +checking if image is initramfs...it isn't (no cpio magic); looks like an initrd 
 +Freeing initrd memory: 1527K 
 +cpufreq: Init kirkwood cpufreq driver 
 +cpufreq: High frequency: 1200000KHz - Low frequency: 400000KHz 
 +cpufreq: Setting CPU Frequency to 1200000 KHz 
 +cpufreq: Setting PowerSaveState to off 
 +XOR registered 1 NET_DMA over 4 channels 
 +XOR 2nd invalidate WA enabled 
 +cesadev_init(c00119d8) 
 +mvCesaInit: sessions=640, queue=64, pSram=f0000000 
 +Warning: TS unit is powered off. 
 +MV Buttons Driver Load 
 +VFS: Disk quotas dquot_6.5.1 
 +Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) 
 +squashfs: version 3.3 (2007/10/31) Phillip Lougher 
 +squashfs: LZMA suppport for slax.org by jro 
 +Installing knfsd (copyright (C) 1996 okir@monad.swb.de). 
 +JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. 
 +SGI XFS with large block numbers, no debug enabled 
 +io scheduler noop registered 
 +io scheduler anticipatory registered (default) 
 +Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 4 ports, IRQ sharing disabled 
 +serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A 
 +serial8250.0: ttyS1 at MMIO 0xf1012100 (irq = 34) is a 16550A 
 +RAMDISK driver initialized: 16 RAM disks of 10240K size 1024 blocksize 
 +loop: module loaded 
 +Loading Marvell Ethernet Driver: 
 +  o Cached descriptors in DRAM 
 +  o DRAM SW cache-coherency 
 +  o Single RX Queue support - ETH_DEF_RXQ=0 
 +  o Single TX Queue support - ETH_DEF_TXQ=0 
 +  o TCP segmentation offload enabled 
 +  o LRO support supported 
 +  o Receive checksum offload enabled 
 +  o Transmit checksum offload enabled 
 +  o Network Fast Processing (Routing) supported 
 +  o Driver ERROR statistics enabled 
 +  o Driver INFO statistics enabled 
 +  o Proc tool API enabled 
 +  o SKB Reuse supported 
 +  o SKB Recycle supported 
 +  o Rx descripors: q0=128 
 +  o Tx descripors: q0=532 
 +  o Loading network interface(s): 
 +    o  register under egiga0 platform 
 +    o egiga0, ifindex = 1, GbE port = 0 
 + 
 +Warning: Giga 1 is Powered Off 
 + 
 +mvFpRuleDb (cfef2000): 2048 entries, 8192 bytes 
 +Integrated Sata device found 
 +scsi0 : Marvell SCSI to SATA adapter 
 +scsi1 : Marvell SCSI to SATA adapter 
 +scsi 0:0:0:0: Direct-Access    WDC      WD10EALS-00Z8A0 05.0 PQ: 0 ANSI: 5 
 +scsi 1:0:0:0: Direct-Access    WDC      WD10EALS-00Z8A0  05.0 PQ: 0 ANSI: 5 
 +scsi 0:0:0:0: Attached scsi generic sg0 type 0 
 +scsi 1:0:0:0: Attached scsi generic sg1 type 0 
 +NFTL driver: nftlcore.c $Revision: 1.1.1.1 $, nftlmount.c $Revision: 1.1.1.1 $ 
 +NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit) 
 +Scanning device for bad blocks 
 +Bad eraseblock 964 at 0x07880000 
 +Using static partition definition 
 +Creating 6 MTD partitions on "nand_mtd": 
 +0x00000000-0x00100000 : "u-boot" 
 +0x00100000-0x00600000 : "uImage" 
 +0x00600000-0x00b00000 : "ramdisk" 
 +0x00b00000-0x07100000 : "image" 
 +0x07100000-0x07b00000 : "mini firmware" 
 +0x07b00000-0x08000000 : "config" 
 +ehci_marvell ehci_marvell.70059: Marvell Orion EHCI 
 +ehci_marvell ehci_marvell.70059: new USB bus registered, assigned bus number 1 
 +ehci_marvell ehci_marvell.70059: irq 19, io base 0xf1050100 
 +ehci_marvell ehci_marvell.70059: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 
 +usb usb1: configuration #1 chosen from 1 choice 
 +hub 1-0:1.0: USB hub found 
 +hub 1-0:1.0: 1 port detected 
 +ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver 
 +USB Universal Host Controller Interface driver v3.0 
 +mice: PS/2 mouse device common for all mice 
 +i2c /dev entries driver 
 +md: linear personality registered for level -1 
 +md: raid0 personality registered for level 0 
 +md: raid1 personality registered for level 1 
 +device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com 
 +dm_crypt using the OCF package. 
 +cpufreq: Setting CPU Frequency to 1200000 KHz 
 +cpufreq: Setting PowerSaveState to off 
 +usbcore: registered new interface driver usbhid 
 +drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver 
 +TCP cubic registered 
 +NET: Registered protocol family 1 
 +NET: Registered protocol family 17 
 +md: Autodetecting RAID arrays. 
 +md: autorun ... 
 +md: ... autorun DONE. 
 +RAMDISK: Compressed image found at block 0 
 +VFS: Mounted root (ext2 filesystem). 
 +Freeing init memory: 124K 
 +sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB) 
 +sd 0:0:0:0: [sda] Write Protect is off 
 +sd 0:0:0:0: [sda] Mode Sense: 23 00 10 00 
 +sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA 
 +sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB) 
 +sd 0:0:0:0: [sda] Write Protect is off 
 +sd 0:0:0:0: [sda] Mode Sense: 23 00 10 00 
 +sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA 
 + sda: sda1 sda2 sda4 
 +sd 0:0:0:0: [sda] Attached SCSI disk 
 +sd 1:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB) 
 +sd 1:0:0:0: [sdb] Write Protect is off 
 +sd 1:0:0:0: [sdb] Mode Sense: 23 00 10 00 
 +sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA 
 +sd 1:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB) 
 +sd 1:0:0:0: [sdb] Write Protect is off 
 +sd 1:0:0:0: [sdb] Mode Sense: 23 00 10 00 
 +sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA 
 + sdb: sdb1 sdb2 sdb4 
 +sd 1:0:0:0: [sdb] Attached SCSI disk 
 +usbcore: registered new interface driver usblp 
 +drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver 
 +egiga0: mac address changed 
 +egiga0: link down 
 +egiga0: started 
 +egiga0: link up, full duplex, speed 1 Gbps 
 +ext3: No journal on filesystem on sda4 
 +EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended 
 +ext3: No journal on filesystem on sdb4 
 +EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended 
 +md: md0 stopped. 
 +md: bind<sdb1> 
 +md: bind<sda1> 
 +raid1: raid set md0 active with 2 out of 2 mirrors 
 +md: md1 stopped. 
 +md: bind<sdb2> 
 +md: bind<sda2> 
 +md1: setting max_sectors to 128, segment boundary to 32767 
 +raid0: looking at sda2 
 +raid0:  comparing sda2(974119296) with sda2(974119296) 
 +raid0:  END 
 +raid0:  ==> UNIQUE 
 +raid0: 1 zones 
 +raid0: looking at sdb2 
 +raid0:  comparing sdb2(974119296) with sda2(974119296) 
 +raid0:  EQUAL 
 +raid0: FINAL 1 zones 
 +raid0: done. 
 +raid0 : md_size is 1948238592 blocks. 
 +raid0 : conf->hash_spacing is 1948238592 blocks. 
 +raid0 : nb_zone is 1. 
 +raid0 : Allocating 4 bytes for hash. 
 +kjournald starting.  Commit interval 5 seconds 
 +EXT3-fs warning: maximal mount count reached, running e2fsck is recommended 
 +EXT3 FS on md1, internal journal 
 +EXT3-fs: mounted filesystem with ordered data mode. 
 +Adding 530040k swap on /dev/md0.  Priority:-1 extents:1 across:530040k 
 +Initializing USB Mass Storage driver... 
 +usbcore: registered new interface driver usb-storage 
 +USB Mass Storage support registered. 
 +NTFS driver 2.1.28 [Flags: R/O MODULE]. 
 +usbcore: deregistering interface driver usb-storage 
 +</code> 
 +\\ 
 + 
 +== U-Boot Output == 
 +<code> 
 + ** MARVELL BOARD: DB-88F6281A-BP LE 
 + 
 +U-Boot 1.1.4 (Oct 29 2010 - 10:41:41) Marvell version: 3.4.14.DNS-325.01 
 + 
 +U-Boot code: 00600000 -> 0067FFF0  BSS: -> 006CEE80 
 + 
 +Soc: MV88F6281 Rev 3 (DDR2) 
 +CPU running @ 1200Mhz L2 running @ 400Mhz 
 +SysClock = 400Mhz , TClock = 200Mhz 
 + 
 +DRAM CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6 
 +DRAM CS[0] base 0x00000000  size 256MB 
 +DRAM Total size 256MB  16bit width 
 +Flash:  0 kB 
 +Addresses 8M - 0M are saved for the U-Boot usage. 
 +Mem malloc Initialization (8M - 7M): Done 
 +NAND:128 MB 
 + 
 +CPU : Marvell Feroceon (Rev 1) 
 + 
 +Streaming disabled 
 +Write allocate disabled 
 + 
 + 
 +USB 0: host mode 
 +PEX 0: interface detected no Link. 
 +Net:  egiga0 [PRIME] 
 +Hit any key to stop autoboot: 0 
 +</code> 
 +\\

Navigation
[Edit]
Personal Tools