Differences

This shows you the differences between the selected revision and the current version of the page.

--- howto:kernel_upload 2007/01/15 17:36
+++ howto:kernel_upload 2017/09/06 17:34 current
@@ Line 26: / Line 26: @@
   set send pack 1000
   set window 5
 ===== U-Boot command prompt =====
@@ Line 78: / Line 79: @@
 E to send Error packet, ^C to quit immediately, ^L to refresh screen.</code>
-U-boot will now upload the image, when the upload is complete, type ''"connect"'' to reconnect to u-boot to monitor the next step (which will occur automatically).  After uploading the image u-boot will check the image, if it is a u-boot compatible image and not too large it will program it into flash.  To reboot and execute the new kernel, cycle power **(be sure the programming is done before removing the power)**.
+U-boot will now upload the image, when the upload is complete, type ''"connect"'' to reconnect to u-boot to monitor the next step (which will occur automatically).  After uploading the image u-boot will check the image, if it is a u-boot compatible image and not too large it will program it into flash.
+  ## Total Size      = 0x002de89a = 3008666 Bytes
+  ## Start Addr      = 0x00100000
+  Un-Protect Flash Bank # 1
+  Erase Ramdisk from 0xffc10000 to 0xffefffff ....... done
+  Erased 47 sectors
+  Ramdisk Size = 3008666
+  Copy to Flash... done
+  Protect Flash Bank # 1
+  =>
+Next you can use ''bootm'' command or cycle power to execute the new kernel, **(be sure the programming is done before removing the power)**.
+  => bootm FFF10000 FFC20000