Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
sh: can't open /mnt/HD_a1/fun_plug.d/start/dropbear.sh
this is the message I have after install the fun_plug.
I am able to telnet though
Offline
Is safer install fun_plug? someone had problems?
Last edited by gugaucb (2007-12-07 20:20:00)
Offline
I have just install the fun_plug, after reboot and telent, what should I do then? I have follow the readme file. and cannot find anything to work except the telnet.
I did triy the HD_a2
The firmware is 1.03
Offline
When I installed it on my DNS-323 with firmware 1.03 and only one disk in it, it works.
Putty also can connect to it.
When I attach my second disk and reboot telnet (funplug) doesn't work anymore.
When I remove disk 2 again and reboot it works again perfectly. !!!!
How is this possible because I can't get it running with 2 x 1 TB Samsung disks in it.
----> Found the answer already Vol_1 should be on the right side and Vol_2 should be on the left.
But anyways it works now.
Last edited by whosnext (2008-01-06 10:28:04)
Offline
@anadigi
your fun_plug is working.. that what will happen is enable telnet
i guess the question is .. what were you expecting to happen?
Offline