Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
Hello everybody,
I have the following problem using archivbits for incremental backing up the DNS-323:
When map Map Archive is set, there are all archiv bits set for every file in the share and I can´t clear them, wenn Map Archive is disabled, there are no archivebits to see and I cannot set them automaticly or manually?
can anybody confirm this or help me?
best wishes
martin
Offline
I can confirm, but cannot help
Offline
hmmmmm.... after a boring and expensive conversation with the german D-Link support without a result or useful hints, I began to search for the mistake by myself. After studying the Samba Manual, I think, I´ve found the mistake and did the following:
In the smb.conf there is a option:
force create mode = 0777
this will force the archiv-bit beeing set in each case.
Changing this to
force create mode = 0666
will allow Samba to set the Archiv-Bit correctly.
All my testing in the last 4-hours went fine and I´m confident that this is the solution.
To change the setting I made a dump of the configuration in the Web-Config-Tool of the DNS-323, edited it on my PC and then made a upload.
Please be carefull trying this, do it on your own risk!
Now incrementell backups are going well.
best wishes
martin
Last edited by Kinti (2008-02-25 19:10:21)
Offline