DSM-G600, DNS-3xx and NSA-220 Hack Forum

pwvandeursen wrote:

Does this also work for ffp 0.5?

No, I'm pretty sure it won't.

pwvandeursen wrote:

If not what needs to be changed for it to work?

For a start, the path in the tgz file will be wrong, so after you unpack it you'll have to move the script to wherever the startup files in ffp 0.5 are.

Then you'll need to edit the script to update the path to busybox, so you could try just changing them to the new path to 'sh' in ffp 0.5. So maybe changing /mnt/HD_a2/fun_plug.d/bin/sh to /ffp/bin/sh will work?

Finally, I'm not sure if the PATH definitions in optware.sh will survive in to the shell in ffp 0.5. You'd have to try it and see, and let me know - maybe fonz has some comment?

pwvandeursen wrote:

sorry for the stupid question but which dir is:
I've attached the file packaged in a tgz file which you can either extract in a telnet session in the / directory or run the command
is that the root?

Yes, it is the root directory, where you end up if you type 'cd /'. But as I said, the tgz file has the file in a subdirectory that will not be correct for ffp 0.5. The file is intended for fonz fun_plug 0.4, which has a special command funkpg that will do the right thing with it!

I just tried to adapt optware.sh to ffp0.5

optware.sh (minimalistic, without comments):

#!/bin/sh

mkdir -p /opt
mount --bind /mnt/HD_a2/ipkg/opt /opt
for i in /opt/etc/init.d/S??* ;do  
  [ ! -f "$i" ] && continue
  
  case "$i" in
     *.sh)
          (
                  trap - INT QUIT TSTP
                  set start
                  . $i
          )
          ;;
     *)
          $i start
          ;;
  esac
done

PLUS you need change (add paths) /ffp/etc/profile

# Don't want a global LD_LIBRARY_PATH
unset LD_LIBRARY_PATH

if [ $(id -u) -eq 0 ]; then
    PATH=/ffp/sbin:/ffp/bin:/usr/sbin:/sbin:/usr/bin:/bin
else
    PATH=/ffp/bin:/usr/bin:/bin:.
fi

#optware
PATH=/opt/bin:/opt/sbin:$PATH

PS1='\u@\h:\w\$ '
PS2='> '

export PATH PS1 PS2 TERM

umask 022

Enjoy, it works for me.

Last edited by whiski (2008-07-17 17:04:15)

pwvandeursen wrote:

Sorry to have to ask it, but what are the step by step actions needed to get Optware working with ffp 0.5 with this? ( I would like to have the ldap server running on my dlink)

Thanks for any help.

i'm quite a noob but could follow these instructions, i use ffp 0.5 on usb, just adapt the commands to your setup.

http://dns323.kood.org/howto:optware

Last edited by knireis (2008-07-21 11:04:27)

just follow the steps and it will work, to make it active at startup i used the information from entry #5 in this topic from whiski.
I installed MC this way and it works good.

Followed all the steps, and wanted to start optware, but unfortunately unsuccessful:
~/HD_a2/ffp/start # ls -n
total 96
-rw-r--r-- 1   0   0   52 Apr 19 13:26 LOGIN.sh
-rw-r--r-- 1   0   0   36 Apr 19 13:26 SERVERS.sh
-rw-r--r-- 1   0   0  698 Apr 19 13:26 adjtimex.sh
-rw-r--r-- 1   0   0  209 Apr 14 21:55 btpd.sh
-rw-r--r-- 1   0   0  203 Apr 19 12:11 inetd.sh
-rw-r--r-- 1   0   0  229 Apr 15 14:06 kickwebs.sh
-rwxr-xr-x 1   0   0  223 Apr 15 14:06 lighttpd.sh
-rw-r--r-- 1   0   0  267 Apr 15 14:52 mediatomb.sh
-rwxr-xr-x 1   0   0 2453 Jun 15 17:07 mysqld.sh
-rw-r--r-- 1   0   0 1468 Apr 15 21:50 nfsd.sh
-rw-r--r-- 1   0   0  526 Apr 15 17:00 ntpd.sh
-rwxr-xr-x 1 501 501  334 Jul 21 14:45 optware.sh
-rwxr-xr-x 1   0   0  552 Apr 19 13:26 passwd.sh
-rw-r--r-- 1   0   0  160 Apr 15 22:18 portmap.sh
-rwxrwxrwx 1 501 501  322 Apr 12 16:15 pwconv.sh
-rwxr-xr-x 1   0   0  861 Apr 19 13:26 rcS.sh
-rw-r--r-- 1   0   0  224 Apr 16 07:37 rsyncd.sh
-rwxr-xr-x 1   0   0  534 Apr 19 13:26 shells.sh
-rw-r--r-- 1   0   0  229 Apr 24 19:16 smartd.sh
-rw-r--r-- 1   0   0  971 Apr 14 21:19 sshd.sh
-rw-r--r-- 1   0   0  398 Apr 19 12:11 syslogd.sh
-rwxr-xr-x 1   0   0  169 Apr 19 13:26 telnetd.sh
-rw-r--r-- 1   0   0  998 Apr 16 21:33 unfsd.sh
-rwxrwxrwx 1   0   0 2064 Apr 19 13:26 usbdisk.sh
~/HD_a2/ffp/start # sh /mnt/HD_a2/ffp/start/optware.sh start
sed: No such file or directory
Starting MySQL................................... ERROR!
Starting web server: lighttpd
2008-07-21 15:25:13: (network.c.300) can't bind to port:  3000 Address already in use

mysql is running, so I don't understand the error (or is that because it is running?)
why doesn't optware start?

EDIT: The .5 scripts added by whiski work GREAT. For those like me that fail to read ALL the instructions and skip to the fun stuff beware.

You must complete the entire ffp .5 procedures to include enabling ssh!!! If you try to complete these procedures in telnet the ffp profile script will not update the path to inlclude /opt/bin.

Thanks for the help. Now we'll see if I can get the new functioning optware/ffp on to the USB stick.

Last edited by kennedy101 (2009-01-02 22:00:33)

Oh well, for the noobs like me

You have to create /opt/etc/init.d/ directory and in it you have to have scripts named like this S05xyz.sh.

optware.sh will execute all files that start with S followed by any two characters (which you should use as numbers so you can control the startup order) and then any characters and extension .sh.

I hope somebody will find it usefull.