DSM-G600, DNS-3xx and NSA-220 Hack Forum

Ok, thanks to Sala for helping me get the toolchain working, I was able to compile lighttpd from source creating all the modules.  Server does now start and host pages fine. 

I would like to make it available but the file is 1.3meg and not able to be attatched.  Will send via Email. (Note:  Email failed)

Last edited by TheWalt (2006-09-16 04:54:58)

My next attempt is trying to get PHP 4 working in conjunction with the fastcgi of lighttpd, 

During compile, I get an error due to the lack of MONETARY.H file not being in the cross compile toolset.  Although I could (and tried) remove the reference, functions that would have been defined within are later referenced thus halting compile anyway. 

Anyone more familiar with this then I know of a work around?

Thanks in advance.

sala wrote:

PS: it takes about 2-3h to compile.

I suppose you compiled on the DSM-G600 that's why it took a very long time. 

TheWalt wrote:

My next attempt is trying to get PHP 4 working

Try php5, I did also fail with php4 but php5 is ok.
You can use

CC=/home/sala/powerpc-uclibc-toolchain/toolchain_powerpc/bin/powerpc-linux-uclibc-gcc \
CXX=/home/sala/powerpc-uclibc-toolchain/toolchain_powerpc/bin/powerpc-linux-uclibc-g++ \
./configure --target="powerpc-uclibc-linux-gnu" \
--host="powerpc-uclibc-linux-gnu" \
--program-prefix="" \
--program-suffix="" \
--disable-cli \
--enable-cgi \
--enable-fastcgi \
--enable-force-cgi-redirect \
--enable-discard-path \
--enable-shared \
--disable-static \
--disable-rpath \
--disable-debug \
--without-pear \
--disable-spl \
--with-config-file-path=/mnt/HD_a2 \
--disable-ipv6 \
--enable-magic-quotes \
--enable-memory-limit \
--disable-short-tags \
--disable-ctype \
--disable-dom \
--enable-ftp=shared \
--without-gettext \
--without-iconv \
--disable-libxml \
--without-libxml-dir \
--disable-mbstring \
--disable-mbregex \
--with-openssl=shared \
--enable-session=static \
--disable-simplexml \
--disable-soap \
--enable-sockets=shared \
--disable-tokenizer \
--with-zlib \
--without-xml \
--disable-xml \
--without-libxml-dir \
--disable-xmlreader \
--disable-xmlwriter \
--disable-crypt \
--without-crypt

Finaly binary will be around 9MB, so I still prefer chroot into gentoo method

I did re-compile lighttpd and php5 with some code optimization, now php binary is 2.9MB instead 9MB and lighttpd is about 1/3 of it's old size.

Got it working. (UPDATED: 10/14/06)  The following basic config file was successful to display the php version info page in a web browser.

Steps:

1) Untar lighttpd and php into the same directory (in my case that was /mnt/HD_a2/website)
2) Create the following config file where server.document-root is the root path to your web page files (in my case that was /mnt/HD_a2/website/pages), server.port is the port you want to use since 80 is taken by the built in interface, and where bin.path is the directory from step 1.  File name should be lighttpd.conf and placed in the same folder as step 1.

server.document-root = "/mnt/HD_a2/website/pages/"

server.port = 3000

mimetype.assign = (
  ".html" => "text/html",
  ".htm" => "text/html",
  ".txt" => "text/plain",
  ".jpg" => "image/jpeg",
  ".gif" => "image/gif",
  ".png" => "image/png"
)

index-file.names  = ( "index.php", "index.html",
                      "index.htm", "default.htm" )
                      
dir-listing.activate = "enable"

server.modules = (
  "mod_rewrite",
  "mod_access",
  "mod_fastcgi",
  "mod_accesslog",
  "mod_dirlisting",
  "mod_indexfile"
)

fastcgi.server = ( ".php" =>
  (( "host" => "127.0.0.1", 
     "port" => 1026,
     "bin-path" => "/mnt/HD_a2/website/php"
  ))
)

Then create a web page in your website root folder (index.php for example) that contains:

<?php phpinfo(); ?>

Then from telnet session (might work in funplug but haven't gotten that far) start the service by typing (using my path examples):

/mnt/HD_a2/website/lighttpd -f lighttpd.conf -m /mnt/HD_a2/website

It should respond "server started".  Then open a web browser to your file and see if it worked!   http://youriphere/index.php

Thanks again to Sala for the binaries, I'll be posting more as I continue working on it.

UPDATED:  Added the config line to auto-load index page if found.  Also added config line to enable file listing which has CSS support (still researching but default works).

Last edited by TheWalt (2006-10-14 22:00:35)

You mean --enable-sockets=static instead of --enable-sockets=shared or what?

Now I know, but unfortunately it look like kernel limitation. Thats why screen and dtach is not working also.

I think that you need to add full path to lighttpd.conf

/mnt/HD_a2/website/lighttpd -f /mnt/HD_a2/website/lighttpd.conf -m /mnt/HD_a2/website

New versions:
Minimal - http://dns323.kood.org/downloads/lightt … 13.tar.bz2
With pcre (needed for full rewrite support) - http://dns323.kood.org/downloads/lightt … 13.tar.bz2
With pcre and ssl - http://dns323.kood.org/downloads/lightt … 13.tar.bz2

Super!  Something to keep me busy this week.

Found some time to work with this yet again.

Your php version 4.4.4 with gd support is working great excpet it didn't have jpg enabled, which almost everything uses.  Any chance of getting that recompiled with jpeg support... please please


And as long as I am waiting.  If I start the server from telnet all works fine, but if I start it from fun_plug only the web server starts, it doesn't spawn the php listeners.  Any ideas on why that might be?  path issue?  shell issue?


As always thanks in advance.

Last edited by TheWalt (2006-10-27 04:14:57)