DSM-G600, DNS-3xx and NSA-220 Hack Forum
Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
Announcement
IRC Channel #funplug on irc.freenode.org
#1 2008-06-30 15:05:04
1.04RC3 firmware CH3SNAS
Just released today
http://www.aroundmyroom.com/2008/06/30/ … rc3-final/
security issues fixed ;-) ..
and some problems with the UPnP A/V server.
enjoy!
Offline
#2 2008-07-01 22:15:54
- w00
- Member
- Registered: 2007-09-07
- Posts: 29
Re: 1.04RC3 firmware CH3SNAS
Updated to 1.04 ch3snas firmware.
1. renamed fun_plug + reboot
2. install fw 1.04 + reboot
3. rename _fun_plug back to fun_plug + reboot
4. reset ch3snas to default system settings
5- set settings again
Now the hdd in the ch3snas is seeking ..whatever ..all the time.. it gives me constant seek noise.. rebooting wont help, logging in via telnet works, so funplugs should work. but what is that seeking noise? and why doesnt the hdd spin down as set after 5 mins? can i check via telnet what job is responsible for whats goin on?
cheerio and thx!
Offline
#3 2008-07-01 23:04:14
- blahsome
- Member
- Registered: 2008-03-02
- Posts: 157
Re: 1.04RC3 firmware CH3SNAS
Turn off all servers (iTunes, UPnP media server, etc) if you are not using them. They could be indexing media.
Offline
#4 2008-07-05 00:40:33
- w00
- Member
- Registered: 2007-09-07
- Posts: 29
Re: 1.04RC3 firmware CH3SNAS
thx blahsome. helped
but after upgrade to 1.04 spindown wont work, also have installed fun_plugs 
cheerio
EDIT: after reinstalling of 1.03 spindown still dont work, unless i switch off funplugs (by renaming fun_plug and rebooting).. any ideas what happens? thx!
Last edited by w00 (2008-07-05 01:28:26)
Offline
#5 2008-07-10 18:58:48
- knireis
- Member
- Registered: 2007-12-10
- Posts: 231
Re: 1.04RC3 firmware CH3SNAS
during upgrade the root passwd is lost. If you use SSH you first have to enable telnet again by using Fonz original funplug (at least i did it this way) and then restore the password by typing at the command promt:
passwd
If that worked, save the password to flash memory:
store-passwd.sh
Hope this might help people out, it took me quite a while before realizing what was going on
Offline