DSM-G600, DNS-3xx and NSA-220 Hack Forum
Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
Announcement
IRC Channel #funplug on irc.freenode.org
#1 2008-08-07 17:02:06
- rocketfu
- Member
- Registered: 2008-08-07
- Posts: 6
fun_plug 0.5 not enabling telnet access
I'm attempting to install fun_plug .05 on a DNS 323 FW 1.05 (I also tried 1.04). The fun_plug executes, untars the tarball, but does not enable telnet. I checked the /start directory and it looks like telnet is enabled (+x) but the LOGIN.sh and SERVER.sh are not. Should they be? I tried enabling them retaring the whole thing and executing and still no go. Here is my ffp.log output with the stock fun_plug.tgz after the initial run.
If you don't know how to fix it could some of you provide me your DNS 323 settings. Firmware version in particular that's all I can think would change things.
Thanks,
--Rocketfu
BTW fun_plug .04 works fine.
Last edited by rocketfu (2008-08-07 17:03:04)
Offline
#2 2008-08-07 17:13:41
- bq041
- Member
- From: USA
- Registered: 2008-03-19
- Posts: 709
Re: fun_plug 0.5 not enabling telnet access
It is most likely a bug and you have a duplicate password entry. The solution is simple.
http://dns323.kood.org/forum/viewtopic. … 2&p=11
Look at post # 257 for the solution.
DNS-323 F/W: 1.04b84 H/W: A1 ffp: 0.5 Drives: 2X 400 GB Seagate SATA-300
DNS-323 F/W: 1.05b28 H/W: B1 ffp: 0.5 Drives: 2X 1 TB WD SATA-300
DSM-G600 F/W: 1.02 H/W: B Drive: 500 GB WD ATA
Offline
#3 2008-08-07 18:49:37
- rocketfu
- Member
- Registered: 2008-08-07
- Posts: 6
Re: fun_plug 0.5 not enabling telnet access
Thanks bq041! This fix worked beautifully.
Offline