DSM-G600, DNS-3xx and NSA-220 Hack Forum

I have slimserver working (at least it seems to work) on my dns323. I still need some time to test and package stuff, though.

Would everything be installed to flash or to the HD? That way if I install it, and remove the two 320GB and fit two 1TB- if it's flash then just setup discs and continue (like DNS-323 stock firmware) but if it's like Buffalo the firmware is on the HD- you can't just bung in a new HD as you'll need to clone the partitions/disc then recover the system from a clone image.

knireis wrote:

Which version?

7.2

fonz wrote:

knireis wrote:

Which version?

7.2

would be interesting to see the performance of this setup

ok installed ffp, the ffp directory is now about 800MB but what do I do now?

Another option for squeezecenter 7.2 is optware.
See http://dns323.kood.org/howto:optware and http://forums.slimdevices.com/showthread.php?t=52466

yannick wrote:

I've posted the steps I used to install SC7.2 on my DNS-323 using ffp 0.5 there:
http://forums.slimdevices.com/showthread.php?t=52664

Maybe it can help you...

Yannick

tried it, but here it stops

4.2.3) Download and install DBD::mysql
/mnt/HD_a2/ffp/tmp # wget http://search.cpan.org/CPAN/authors/...l-4.008.tar.gz
/mnt/HD_a2/ffp/tmp # tar xfz DBD-mysql-4.008.tar.gz
/mnt/HD_a2/ffp/tmp # cd DBD-mysql-4.008/
/mnt/HD_a2/ffp/tmp/DBD-mysql-4.008 # perl Makefile.PL
/mnt/HD_a2/ffp/tmp/DBD-mysql-4.008 # make
/mnt/HD_a2/ffp/tmp/DBD-mysql-4.008 # make install
/mnt/HD_a2/ffp/tmp/DBD-mysql-4.008 # cd ..

when using make ..

/ffp/bin/ld: ERROR: /usr/lib/libssl.so uses hardware FP, whereas blib/arch/auto/                                          DBD/mysql/mysql.so uses software FP
/ffp/bin/ld: failed to merge target specific data of file /usr/lib/libssl.so
/ffp/bin/ld: ERROR: /usr/lib/libcrypto.so uses hardware FP, whereas blib/arch/au                                          to/DBD/mysql/mysql.so uses software FP
/ffp/bin/ld: failed to merge target specific data of file /usr/lib/libcrypto.so
/ffp/bin/ld: ERROR: /usr/lib/libgcc_s.so uses hardware FP, whereas blib/arch/aut                                          o/DBD/mysql/mysql.so uses software FP
/ffp/bin/ld: failed to merge target specific data of file /usr/lib/libgcc_s.so
/ffp/bin/ld: ERROR: /usr/lib/libgcc_s.so uses hardware FP, whereas blib/arch/aut                                          o/DBD/mysql/mysql.so uses software FP
/ffp/bin/ld: failed to merge target specific data of file /usr/lib/libgcc_s.so
collect2: ld returned 1 exit status
distcc[1295] ERROR: compile (null) on localhost failed
make: *** [blib/arch/auto/DBD/mysql/mysql.so] Error 1

so no idea how to solve that the rest of the installation of the packages seems to go ok

fonz wrote:

zeroday wrote:

/ffp/bin/ld: ERROR: /usr/lib/libssl.so uses hardware FP, whereas blib/arch/auto/                                          DBD/mysql/mysql.so uses software FP
/ffp/bin/ld: failed to merge target specific data of file /usr/lib/libssl.so

You're mixing ffp and firmware libs. Try setting LDFLAGS before compiling packages:

Code:

export LDFLAGS="-Wl,-rpath -Wl,/ffp/lib"

tried that
get this

libs          (mysql_config) = -Wl,-rpath -Wl,/ffp/lib -rdynamic -L/ffp/lib/my                                                                                                                               sql -lmysqlclient -lz -lcrypt -lnsl -lm -L/usr/lib -lssl -lcrypto
  mysql_config  (guessed     ) = mysql_config
  nocatchstderr (default     ) = 0
  nofoundrows   (default     ) = 0
  ssl           (guessed     ) = 1
  testdb        (default     ) = test
  testhost      (default     ) =
  testpassword  (default     ) =
  testsocket    (default     ) =
Use of uninitialized value in printf at Makefile.PL line 175, <PIPE> line 93.
  testuser      (            ) = root

To change these settings, see 'perl Makefile.PL --help' and
'perldoc INSTALL'.

Checking if your kit is complete...
Looks good
Unrecognized argument in LIBS ignored: '-Wl,-rpath'
Unrecognized argument in LIBS ignored: '-Wl,/ffp/lib'
Unrecognized argument in LIBS ignored: '-rdynamic'
Using DBI 1.607 (for perl 5.010000 on arm-linux-thread-multi) installed in /ffp/                                                                                                                               lib/perl5/site_perl/5.10.0/arm-linux-thread-multi/auto/DBI/
Writing Makefile for DBD::mysql

fonz wrote:

zeroday wrote:

tried that
get this

Yes, run 'make' now.

/mnt/HD_a2/ffp/tmp/DBD-mysql-4.008 # make
cp lib/DBD/mysql.pm blib/lib/DBD/mysql.pm
cp lib/DBD/mysql/GetInfo.pm blib/lib/DBD/mysql/GetInfo.pm
cp lib/DBD/mysql/INSTALL.pod blib/lib/DBD/mysql/INSTALL.pod
cp lib/Bundle/DBD/mysql.pm blib/lib/Bundle/DBD/mysql.pm
distcc -c  -I/ffp/lib/perl5/site_perl/5.10.0/arm-linux-thread-multi/auto/DBI -I/ffp/include/mysql  -pipe -DDBD_MYSQL_WITH_SSL -DDBD_MYSQL_INSERT_ID_IS_GOOD -g  -D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -O2 -pipe -fno-strict-aliasing -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2   -DVERSION=\"4.008\" -DXS_VERSION=\"4.008\" -fPIC "-I/ffp/lib/perl5/5.10.0/arm-linux-thread-multi/CORE"   dbdimp.c
distcc[3927] ERROR: nonblocking connect to 127.0.0.1:3632 failed: Connection refused
distcc[3927] Warning: failed to distribute dbdimp.c to 127.0.0.1, running locally instead
/ffp/bin/perl -p -e "s/~DRIVER~/mysql/g" /ffp/lib/perl5/site_perl/5.10.0/arm-linux-thread-multi/auto/DBI/Driver.xst > mysql.xsi
/ffp/bin/perl /ffp/lib/perl5/5.10.0/ExtUtils/xsubpp  -typemap /ffp/lib/perl5/5.10.0/ExtUtils/typemap  mysql.xs > mysql.xsc && mv mysql.xsc mysql.c
Warning: duplicate function definition 'do' detected in mysql.xs, line 225
Warning: duplicate function definition 'rows' detected in mysql.xs, line 650
distcc -c  -I/ffp/lib/perl5/site_perl/5.10.0/arm-linux-thread-multi/auto/DBI -I/ffp/include/mysql  -pipe -DDBD_MYSQL_WITH_SSL -DDBD_MYSQL_INSERT_ID_IS_GOOD -g  -D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -O2 -pipe -fno-strict-aliasing -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2   -DVERSION=\"4.008\" -DXS_VERSION=\"4.008\" -fPIC "-I/ffp/lib/perl5/5.10.0/arm-linux-thread-multi/CORE"   mysql.c
distcc[3968] (dcc_build_somewhere) Warning: failed to distribute, running locally instead
Running Mkbootstrap for DBD::mysql ()
chmod 644 mysql.bs
rm -f blib/arch/auto/DBD/mysql/mysql.so
LD_RUN_PATH="/ffp/lib/mysql:/ffp/lib:/usr/lib" /ffp/bin/perl myld distcc  -shared  -Wl,-rpath -Wl,/ffp/lib -O2 dbdimp.o mysql.o  -o blib/arch/auto/DBD/mysql/mysql.so   \
           -L/ffp/lib/mysql -lmysqlclient -lz -lcrypt -lnsl -lm -L/usr/lib -lssl -lcrypto       \

/ffp/bin/ld: ERROR: /usr/lib/libssl.so uses hardware FP, whereas blib/arch/auto/DBD/mysql/mysql.so uses software FP
/ffp/bin/ld: failed to merge target specific data of file /usr/lib/libssl.so
/ffp/bin/ld: ERROR: /usr/lib/libcrypto.so uses hardware FP, whereas blib/arch/auto/DBD/mysql/mysql.so uses software FP
/ffp/bin/ld: failed to merge target specific data of file /usr/lib/libcrypto.so
/ffp/bin/ld: ERROR: /usr/lib/libgcc_s.so uses hardware FP, whereas blib/arch/auto/DBD/mysql/mysql.so uses software FP
/ffp/bin/ld: failed to merge target specific data of file /usr/lib/libgcc_s.so
/ffp/bin/ld: ERROR: /usr/lib/libgcc_s.so uses hardware FP, whereas blib/arch/auto/DBD/mysql/mysql.so uses software FP
/ffp/bin/ld: failed to merge target specific data of file /usr/lib/libgcc_s.so
collect2: ld returned 1 exit status
distcc[3999] ERROR: compile (null) on localhost failed
make: *** [blib/arch/auto/DBD/mysql/mysql.so] Error 1


set
HISTFILE='/.ash_history'
HOME='/'
IFS='
'
LDFLAGS='-Wl,-rpath -Wl,/ffp/lib'
OLDPWD='/ffp/tmp'
OPTIND='1'
PATH='/ffp/sbin:/ffp/bin:/usr/sbin:/sbin:/usr/bin:/bin'
PPID='1667'
PS1='\w \$ '
PS2='> '
PS4='+ '
PWD='/ffp/tmp/DBD-mysql-4.008'
SHELL='/bin/sh'
TERM='vt102'
USER='root'
_='make'

fonz wrote:

zeroday wrote:

LD_RUN_PATH="... -L/usr/lib -lssl -lcrypto

This is still wrong, I don't have '-L/usr/lib' in there.

What mysql package are you using? Check output of

Code:

readelf -d /ffp/lib/libmysqlclient.so
...
0x0000000f (RPATH)                      Library rpath: [/ffp/lib]

it's a CH3SNAS with latest firmware completely fresh, fun_plug package 0.5

/mnt/HD_a2/ffp/tmp/DBD-mysql-4.008 # readelf -d /ffp/lib/libmysqlclient.so

Dynamic section at offset 0x117cb0 contains 28 entries:
  Tag        Type                         Name/Value
0x00000001 (NEEDED)                     Shared library: [libcrypt.so.0]
0x00000001 (NEEDED)                     Shared library: [libnsl.so.0]
0x00000001 (NEEDED)                     Shared library: [libm.so.0]
0x00000001 (NEEDED)                     Shared library: [libssl.so.0.9.8]
0x00000001 (NEEDED)                     Shared library: [libcrypto.so.0.9.8]
0x00000001 (NEEDED)                     Shared library: [libz.so.1]
0x00000001 (NEEDED)                     Shared library: [libc.so.0]
0x0000000e (SONAME)                     Library soname: [libmysqlclient.so.15]
0x0000000f (RPATH)                      Library rpath: [/ffp/lib]
0x0000000c (INIT)                       0xdd78
0x0000000d (FINI)                       0x47fe4
0x00000004 (HASH)                       0xb4
0x00000005 (STRTAB)                     0x54e4
0x00000006 (SYMTAB)                     0x1814
0x0000000a (STRSZ)                      15728 (bytes)
0x0000000b (SYMENT)                     16 (bytes)
0x00000003 (PLTGOT)                     0x11fdb0
0x00000002 (PLTRELSZ)                   3048 (bytes)
0x00000014 (PLTREL)                     REL
0x00000017 (JMPREL)                     0xd190
0x00000011 (REL)                        0x9a28
0x00000012 (RELSZ)                      14184 (bytes)
0x00000013 (RELENT)                     8 (bytes)
0x6ffffffc (VERDEF)                     0x99f0
0x6ffffffd (VERDEFNUM)                  2
0x6ffffff0 (VERSYM)                     0x9254
0x6ffffffa (RELCOUNT)                   850
0x00000000 (NULL)                       0x0

(note: all other perl packages compiled perfectly, only this one has this behaviour)

Last edited by zeroday (2008-09-16 16:56:47)

try with

perl Makefile.PL --libs="-Wl,-rpath -Wl,/ffp/lib -rdynamic -L/ffp/lib/mysql -lmysqlclient -lz -lcrypt -lnsl -lm -L/ffp/lib -lssl -lcrypto"

worked for me. And now I have squeezecenter 7.2 working on my Zyxel NAS :-)

Last edited by superkikim (2008-09-18 01:35:47)

As promised, here's my first attempt on the slimserver packages:
  http://www.inreto.de/dns323/squeezecenter-packages/

The README file contains the steps needed to get it started.

A big thanks goes to Yannick for the tutorial at the slimserver forum. I largely followed your tutorial, with a few exceptions:

- Compress::Raw::Zlib, IO::Compress::Base, IO::Compress::ZLib are core packages and already present. You don't need to recompile them if you chose the matching version of Compress::Zlib
- In addition to GD, DBI, DBD::mysql, Encode::Detect, Template and Compress::Zlib, I compiled HTML::Tagset, HTML::Parser, and XML::Parser as separate perl packages.
- You don't need to set LD_LIBRARY_PATH if all ELF files have the RPATH set.
- You can avoid the start/chown/start again/... pain if you manually create the prefs, Logs, Cache directories with correct permissions, and then do 'su slimserver' before starting slimserver.pl.


Have fun.