DSM-G600, DNS-3xx and NSA-220 Hack Forum
Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
Announcement
IRC Channel #funplug on irc.freenode.org
#1 2009-03-06 18:59:57
- dustyken
- New member
- Registered: 2009-02-19
- Posts: 3
Noob Firmware question
Ok, I'll go ahead and say it, I'm a noob here. I got here because I want to upgrade my DSM-G600 from a 250GB HDD to a 1T. I see there is some discussion related to that, but everyone mentions Firmware 1.05 or 1.06. I went to DLink's website and they only have 1.02. Where do I get 1.05 or 1.06? Does it require fun_plug? Thanks.
Offline
#2 2009-03-12 21:13:09
Re: Noob Firmware question
You probably got yourself confused with DSM-G600 and DNS-323.
If you have DSM-G600 the look over http://dns323.kood.org/dsmg600/ and http://dns323.kood.org/downloads/
If you have DNS-323 then go to http://dns323.info/
• DSM-G600 - NetBSD hdd-boot - 80GB Samsung SP0802N
• NSA-220 - Gentoo armv5tel 20110121 hdd-boot - 2x 2TB WD WD20EADS
Offline
#3 2009-03-16 21:34:08
- dustyken
- New member
- Registered: 2009-02-19
- Posts: 3
Re: Noob Firmware question
Thanks sala. Do you know if the dsm-g600 will support a 1T hdd? Thanks. If so, does it require modding to support it?
Offline
#4 2009-03-19 12:36:09
Re: Noob Firmware question
I don't. There might be always some drives which don't work with DSM-G600, they can be 40GB or they can be 1TB. You will just have to try or read from other people experiences.
• DSM-G600 - NetBSD hdd-boot - 80GB Samsung SP0802N
• NSA-220 - Gentoo armv5tel 20110121 hdd-boot - 2x 2TB WD WD20EADS
Offline