DSM-G600, DNS-3xx and NSA-220 Hack Forum
Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
Announcement
IRC Channel #funplug on irc.freenode.org
#1 2009-03-28 01:27:47
- Parsec
- Member
- Registered: 2008-03-12
- Posts: 22
Break mirror and remove drive
I have two 500gb drives in my DNS-323, in a RAID 1 configuration.
I want to remove one of the drives, can I do this? One thought was to remove a drive and reset the device, and have it restart in single-drive mode. But according to this it might not work.
http://dns323.kood.org/forum/viewtopic.php?id=2390
Has anyone tried removing a drive and stopping using a RAID 1 setup?
Offline
#2 2009-03-28 01:53:52
- rcblackwell
- Member
- From: Pickering, ON
- Registered: 2008-05-19
- Posts: 204
- Website
Re: Break mirror and remove drive
Parsec wrote:
I have two 500gb drives in my DNS-323, in a RAID 1 configuration.
I want to remove one of the drives, can I do this? One thought was to remove a drive and reset the device, and have it restart in single-drive mode. But according to this it might not work.
http://dns323.kood.org/forum/viewtopic.php?id=2390
Has anyone tried removing a drive and stopping using a RAID 1 setup?
I've had success following information posted in the message at http://dns323.kood.org/forum/viewtopic. … 433#p15433
Bob Blackwell
Pickering, ON
Offline
#3 2009-03-28 02:10:30
- Parsec
- Member
- Registered: 2008-03-12
- Posts: 22
Re: Break mirror and remove drive
rcblackwell wrote:
Parsec wrote:
I have two 500gb drives in my DNS-323, in a RAID 1 configuration.
I want to remove one of the drives, can I do this? One thought was to remove a drive and reset the device, and have it restart in single-drive mode. But according to this it might not work.
http://dns323.kood.org/forum/viewtopic.php?id=2390
Has anyone tried removing a drive and stopping using a RAID 1 setup?I've had success following information posted in the message at http://dns323.kood.org/forum/viewtopic. … 433#p15433
Thank you.
I have telnet access to the box via fun_plug but have no extra software installed apart from Firefly. I don't have a specific "funplug release" installed.
This should still work though as long as mdadm is a built in command.
Offline