DSM-G600, DNS-3xx and NSA-220 Hack Forum
Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
Announcement
IRC Channel #funplug on irc.freenode.org
#1 2006-10-16 12:44:21
- SystemR89
- Member
- From: >>Turin<< >>Italy<<
- Registered: 2006-09-19
- Posts: 88
Use DSM-G600 as Network boot drive
Hi!
I don't know if it is possible, but i will however ask it at you!
I would use my network hard-disk to boot my pc. Can I do it?
Sorry for my bad english...
Free is BETTER!!
Use GNU/Linux!!
Offline
#2 2006-10-16 13:20:56
- kevin
- Member
- Registered: 2006-10-16
- Posts: 10
Re: Use DSM-G600 as Network boot drive
all you really need to do this is a properly configured dhcp and tftp server, as well as binary images for your computer to load (and bootp/pxe support in your computer, of course). there are plenty of tutorials on the net about setting this up.. the only part you need to worry about is getting the appropriate servers (dhcp, tftp) configured on the dsm-g600
Offline
#3 2006-10-18 01:30:29
- idiotboy
- Member
- Registered: 2006-10-05
- Posts: 10
Re: Use DSM-G600 as Network boot drive
Is it possible to make the G600 a DHCP server?
"The multiplying villainies of nature do swarm upon him...
disdaining fortune/with his brandish'd steel, which smoked with bloody execution..." - Shakespeare
Offline
#4 2006-10-30 12:00:07
- Da_G
- New member
- Registered: 2006-10-30
- Posts: 1
Re: Use DSM-G600 as Network boot drive
Unfortunatly, not with the current in-box kernel, you get the following error:
socket: Protocol not available - make sure
CONFIG_PACKET (Packet socket) and CONFIG_FILTER
(Socket Filtering) are enabled in your kernel
configuration!
Most of the things I want to do with the DSM-G600 are limited by the kernel, unfortunatly.
One of these days i'll stumble on a way to flash a new kernel that works! 
Offline
#5 2007-07-05 20:10:16
- KazooLemur
- New member
- Registered: 2007-07-05
- Posts: 1
Re: Use DSM-G600 as Network boot drive
I am also interested in the DSM-G600 running as a DHCP server. I use the box as a wirless network drive during professional meetings, so we do not have to exchange paper reports. But the only option up to now is to plug in a ROuter/Gateway with DHCP to service up the IP addresses through the DSM-G600 operating as an access point.
Offline