DSM-G600, DNS-3xx and NSA-220 Hack Forum

Hi all,

Sorry for butting in but I have a problem with Jtag -not on the 323, but on another box that looks to use the same processor- and thought that someone here could help.

The unit I have is a Buffalo 500 GL (LS-PRO).

From Kuroguy on here:
http://forum.linkstationwiki.net/viewto … amp;t=3001
..my board Jtag is:
CN3 is the JTAG connector. pins are as follows:
1 Vcc
2 nTRST
3 Ground
4 TDI
5 Ground
6 TMS
7 TDO
8 TCK
9 sRST
10 RTCK
(which is not a million miles away from your board layout either)

My ? is:
Is there an 'off-the-shelf' Jtag that conforms to the .pdf on your wiki that I could try -or even modify to suit-?
(not being any sort of useful solderer, I try staying clear of building such creatures)

thanks.
Edit:

I've tried using the Jtag unit that I have, but fail when it comes to R/W

Last edited by phew (2007-05-16 01:49:06)