Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
Hi!
I'm trying to compile the ipv6 module but with no luck. I would like to get my sixxs.net connection working on my nas.
I have a dns-323 B1 with the 1.07 firmare.
I have followed the how-to http://dns323.kood.org/howto:crosscompile to set up a cross compile environment with the firmware 1.06 tarball. I'm using virtualbox with a debian installation.
I have managed to create the environment and after that I use the crosstools-env.sh which I have change according to my paths.
Then it is time to get to work...
make oldconfig make menuconfig (where I add ipv6 as a module) make zImage make modules make modules_install
I get no errors while doing this but when I try to load the ipv6 module on my chrooted environment on my dns I get the following error
FATAL: Error inserting ipv6 (/lib/modules/2.6.12.6-arm1/kernel/net/ipv6/ipv6.ko): Unknown symbol in module, or unknown parameter (see dmesg)
And dmesg displays the following error.
ipv6: Unknown symbol secure_tcpv6_sequence_number ipv6: Unknown symbol ipv6_skip_exthdr ipv6: Unknown symbol secure_tcpv6_port_ephemeral ipv6: Unknown symbol ipv6_ext_hdr
Is it possible to get ipv6 up and running on the dns 323? If someone could point me in the right way I would appreciate it!
Offline
rensvind,
did you ever make any more progress on this?
As a very longshot I tried the ipv6.ko from:
http://dev.skcserver.de/dns323/modules_ … v6/ipv6.ko
I knew it was a pipe dream but the kernel versions did lineup. But it results in a lot of "ipv6: Unknown symbol...." in dmesg.
Any ideas?
-OctZ
Offline