Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
I've partitioned my hard-disk on my pc and I've created a FAT32 partiton on it.
I would mount and share it with samba (and NFS if it's possible)
How I must proceed?
Thanks
Offline
I don't think you can use FAT32 on internal disk on DSM. It will ask you to format the disk eventhough it was formatted with FAT32 (i tried it). The internal Disk has to be formatted with either EXT2 or EXT3. With an external USB drive though it is possible to use the FAT 16 or FAT32 formatted drive.
Hope this helps.
Offline
vic_macky wrote:
I don't think you can use FAT32 on internal disk on DSM. It will ask you to format the disk eventhough it was formatted with FAT32 (i tried it). The internal Disk has to be formatted with either EXT2 or EXT3. With an external USB drive though it is possible to use the FAT 16 or FAT32 formatted drive.
Hope this helps.
I've made 3 partion (swap, ext3 and fat32) and it works! but I can't share my fat partition
Offline
SystemR89 wrote:
I've made 3 partion (swap, ext3 and fat32) and it works! but I can't share my fat partition
You need to configure samba/ftp by hand.
Offline
sala wrote:
SystemR89 wrote:
I've made 3 partion (swap, ext3 and fat32) and it works! but I can't share my fat partition
You need to configure samba/ftp by hand.
I've already tried, but I can't access in my new share (probably I don't have permission because I've also tried to mount this partiton in a internal folder already shared but it is not accessible however)
what I can do to mount with correct permission?
Offline
I've been able to view/modify through samba and ftp!
I've resolved mounting it with these parameters rw,umask=0,iocharset=cp850,shortname=dati on fstab! It works fine!
Offline