DSM-G600, DNS-3xx and NSA-220 Hack Forum

DNS-323 Talker wrote:

I THINK THIS PRETTY MUCH MEANS SUCCESS!!!!   

You didn't think of giving up, did you!?

DNS-323 Talker wrote:

I might set the delay to 60 and see what happens...I can wait a minute or two for USB drive access if that's all it will take.

I've been thinking about this and created a replacement for the fixed sleep time. It's a loop that checks /proc/partitions every other second until it finds the partition (or a 60 seconds timeout expires). I've attached the script. Edit options, disk and mountp (mountpoint). Uncomment ntfs if you need. It expects the kernel modules in fun_plug.d/bin/modules/ (instead of lnx_bin).

Since I don't have an external USB disk, I tested with a USB memory stick.

Last edited by fonz (2007-06-02 01:40:03)

fonz wrote:

DNS-323 Talker wrote:

I might set the delay to 60 and see what happens...I can wait a minute or two for USB drive access if that's all it will take.

I've been thinking about this and created a replacement for the fixed sleep time. It's a loop that checks /proc/partitions every other second until it finds the partition (or a 60 seconds timeout expires). I've attached the script. Edit options, disk and mountp (mountpoint). Uncomment ntfs if you need. It expects the kernel modules in fun_plug.d/bin/modules/ (instead of lnx_bin).

Since I don't have an external USB disk, I tested with a USB memory stick.

Thanks, fonz..I'll download it and take a look at it.   

Things are working fine w/the 15s sleep, but it's the weekend and I'll need something to futz with...

Thats me - "KISS" - Keep It Simple Stupid

Myk

hi,

can somebody pls help. i have follow the instructions and i could not install the module. this is the error i got, but i do not know what it means.

/ # insmod /mnt/HD_a2/lnx_bin/usb-storage.ko
insmod: chdir(2.6.12.6-arm1): No such file or directory
/ # cd /mnt/HD_a2/lnx_bin/
/mnt/HD_a2/lnx_bin # insmod usb-storage.ko
insmod: chdir(2.6.12.6-arm1): No such file or directory

insmod is not broken just that it is looking for modules in /lib/modules/2.6.12.6-arm1

do the following

mkdir /lib/modules/2.6.12.6-arm1
cp usb-storage.ko /lib/modules/2.6.12.6-arm1
depmod
modprobe usb-storage

Hi, I'm trying to install funplug on the USB (acc to http://bfg100k.blogspot.com/search?q=ffp) and after having added the new funplug script and rebooted I can't even telnet any longer. The ffp.log says:

**** fun_plug script for DNS-323 (2008-04-13 tp@fonz.de) ****
Sat Sep 20 12:04:44 GMT 2008
Found usb-storage.ko module. Copying...
insmod usb-storage.ko
ln -snf /mnt/HD_a2/ffp /ffp
Waiting for 029a8b01-8b4d-41f8-a97a-27192170b6f4 (up to 30 seconds) ...
/dev/sdc1: UUID="029a8b01-8b4d-41f8-a97a-27192170b6f4" TYPE="ext2"
/dev/sdc1: UUID="029a8b01-8b4d-41f8-a97a-27192170b6f4" TYPE="ext2"
Success. Found 029a8b01-8b4d-41f8-a97a-27192170b6f4.
Mounting /dev/sdc1 on /mnt/USB
USB stick mounted
* Found FFP on USB device
ln -snf /mnt/USB/ffp /ffp
cp: /mnt/USB/ffp/etc/smb.conf: No such file or directory
$Shutting down SMB services:
$Shutting down NMB services:
$Starting SMB services:
$Starting NMB services:
* Running /ffp/etc/rc ...
* /ffp/start/rcS.sh ...
utmp:x:22:
* /ffp/start/adjtimex.sh inactive
* /ffp/start/passwd.sh ...
Saving /etc/passwd to /etc/passwd.orig ...
Changing shells: /bin/sh -> /ffp/bin/sh ...
Updating /etc/shadow ...
* /ffp/start/shells.sh ...
* /ffp/start/syslogd.sh inactive
* /ffp/start/SERVERS.sh inactive
* /ffp/start/usbdisk.sh inactive
* /ffp/start/portmap.sh inactive
* /ffp/start/unfsd.sh inactive
* /ffp/start/nfsd.sh inactive
* /ffp/start/ntpd.sh inactive
* /ffp/start/smartd.sh inactive
* /ffp/start/LOGIN.sh inactive
* /ffp/start/telnetd.sh inactive
* /ffp/start/svnserve.sh inactive
* /ffp/start/sshd.sh ...
Starting /ffp/sbin/sshd
* /ffp/start/samba.sh inactive
* /ffp/start/rsyncd.sh inactive
* /ffp/start/mysqld.sh inactive
* /ffp/start/mediatomb.sh inactive
* /ffp/start/kickwebs.sh inactive
* /ffp/start/lighttpd.sh inactive
* /ffp/start/inetd.sh inactive
* /ffp/start/dnsmasq.sh inactive
* /ffp/start/btpd.sh inactive
*  OK

Any ideas of what goes wrong? Should the bits between "#MS" and "# run commands" in the script have been removed?

I am curious if someone was actually able to mount NTFS USB drive. I am using 1.05 firmware and ntfs.ko from http://dev.skcserver.de/dns323/, and I am getting segmentation fault every time I am trying to mount NTFS drive. And after that, I have to recycle the power to bring the system back.

A warning.  I would let NTFS lie.  I did some playing around with it a year ago, and the module is either broken, of not compiled correctly for the newer DNS kernel.  I got it to mount a drive, however I lost 100% of the data on that drive within 10 minutes.  It is very unstable.

Last edited by bq041 (2008-11-09 22:53:45)

Consider using EXT2 and then using a module for windows to mount it.  That seems to work good for a lot of us.

Why do you want to use FAT32?  You may want to consider using EXT2 since it is native, and then use a module for Windows.  It work very well for me.

I already have fun_plug loaded from 2009-Jan-29.  I wanted to try getting a USB stick memory to mount.
I downloaded the " usb-storage.ko " and followed the directions.

I have had success in mounting the memory stick.  Thankyou for the directions posted here.

The memory stick that worked for me :
Kingston DataTraveler 4GB

My question is ... what is usbutils-0.73-1.tar  by fonz ? Should I have that loaded too, or is it already installed with
the fun_plug ?

Last edited by Goldie (2009-05-23 22:16:41)

I would like to know if an " all-in-one " type card reader / writer can be made to work
on the USB port of the nas, and then making the card reader / writer a " network "
card reader / writer

Other similar name for all-in-one are 19-in-1 or 23-in-1