DSM-G600, DNS-3xx and NSA-220 Hack Forum

Hi,

I had all this working recently and in getting unfsd to start on reboot, I rebooted the DNS323.
I have two drive attached via the usb port, a 80GB and a 250GB.

Now I get the following and only the 250GB is mounted on sdc1.

As a Linux newbie, I'd appreciate any help as to what the problem is.

I've attached the script I've created to mount these. It will not be perfect (I did say I was a newbie), but if anyone has any advice on how to do this better, I'd be grateful for the comments.

TIA

dmesg output.

usb-storage: waiting for device to settle before scanning
  Vendor: SAMSUNG   Model: SP0842N           Rev: 0811
  Type:   Direct-Access                      ANSI SCSI revision: 00
SCSI device sdd: 156301488 512-byte hdwr sectors (80026 MB)
sdd: assuming drive cache: write through
SCSI device sdd: 156301488 512-byte hdwr sectors (80026 MB)
sdd: assuming drive cache: write through
sdd: sdd1
Attached scsi disk sdd at scsi7, channel 0, id 0, lun 0
Attached scsi generic sg3 at scsi7, channel 0, id 0, lun 0,  type 0
usb-storage: device scan complete
TWSI: mvTwsiStartBitSet ERROR - Start Clear bit TimeOut .
TWSI: mvTwsiStopBitSet ERROR - Stop bit TimeOut .
TWSI: mvTwsiStartBitSet ERROR - Start Clear bit TimeOut .
TWSI: mvTwsiStopBitSet ERROR - Stop bit TimeOut .
usbcore: deregistering driver usb-storage
TWSI: mvTwsiStartBitSet ERROR - Start Clear bit TimeOut .
TWSI: mvTwsiStopBitSet ERROR - Stop bit TimeOut .
Initializing USB Mass Storage driver...
scsi8 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 7
usb-storage: waiting for device to settle before scanning
scsi9 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 8
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
  Vendor: ST325082  Model: 3A                Rev:  0 0
  Type:   Direct-Access                      ANSI SCSI revision: 00
SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB)
sdc: assuming drive cache: write through
SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB)
sdc: assuming drive cache: write through
sdc: sdc1
Attached scsi disk sdc at scsi8, channel 0, id 0, lun 0
Attached scsi generic sg2 at scsi8, channel 0, id 0, lun 0,  type 0
usb-storage: device scan complete

Last edited by gasman (2010-04-02 14:18:26)

---

Attachments:
eps.sh, Size: 1,488 bytes, Downloads: 167