Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
Pages: 1
[This is a repost from Alt-F google groups: Serious issue: Can't connect to web interface or via SSH after upgrading from 0.1B3 to 0.1B4]
Hi,
shauns atheesh has reported that after upgrading from a flashed 0.1B3 to 0.1B4 there was no web interface nor any other network communications with the box.
0.1B4 was working fine otherwise, and was even serving files though samba.
With shaun satheesh collaboration one was able to solve the problem and now he has a flashed 0.1B4 box working fine.
If you intent to flash 0.1B4, please follow the steps bellow, in order to avoid a more complex recovery procedure.
While still in 0.1B3, *either* flashed or running "on top" of the vendor's firmware:
0-If you have never saved settings under Alt-F, you can flash 0.1B4. But to be sure that you have never saved settings, go to the Settings web page and be sure that no choices are offered under "Select one". Go to step 7
1-If you don't mind loosing *all* your settings (including the vendor's firmware ones), go to the Settings web page and click the ClearSettings button. Go to step 7
2-telnet or ssh the box
3-Remove /etc/vsftpd.conf by executing the command "rm /etc/vsftpd.conf" (without quotes, of course)
4-Remove /tmp/settings_saved by executing the command "rm /tmp/settings_saved"
5-Save settings by executing the command "loadsave_settings -sf"
6-log out
7-Flash 0.1B4 using the Firmware web page
If you have already flashed 0.1B4 and have a similar problem, please report and I will outline the steps needed to recover.
If you want to known more details, see the issue 10 posts in http://code.google.com/p/alt-f/
Joao
Offline
Pages: 1