DSM-G600, DNS-3xx and NSA-220 Hack Forum
Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
Announcement
IRC Channel #funplug on irc.freenode.org
#1 2010-10-06 15:14:40
- sirshadow
- Member
- Registered: 2010-10-06
- Posts: 7
PuTTY is not working any more
Hi there,
Two weeks ago I installed fun_plug, with transmission and putty, everything works grate until today, when I tried to access Transmission’s interface is not loading. So I thought it stopped Transmission . I opened putty and surprise, I was greeted by a weird screen where I can not make any command.
Someone have any ideea?
Best regards.
Last edited by sirshadow (2010-10-06 15:15:51)
Offline
#2 2010-10-06 15:26:17
- FunFiler
- Member
- Registered: 2010-05-23
- Posts: 577
Re: PuTTY is not working any more
Reboot?
3 * (DNS-323 with 2 * 2TB) = 12TB Running FW v1.08 & FFP v0.5
Useful Links: Transmission, Transmission Remote, Automatic
Offline
#3 2010-10-06 15:27:51
- sirshadow
- Member
- Registered: 2010-10-06
- Posts: 7
Re: PuTTY is not working any more
yes, but still appears that
BTW, when I tried to restart, there was something weird: is not restarting, so I unplugged it, after that everything seems right with services (Transmission, web interfaces, web services), but I still can't use putty
Last edited by sirshadow (2010-10-06 15:33:19)
Offline
#4 2010-10-06 18:50:47
- karlrado
- Member
- Registered: 2009-12-07
- Posts: 229
Re: PuTTY is not working any more
That is the screen you get when the firmware's shell in /bin/sh is started. There is an unlock code for it that will let you enter commands.
See
http://dns323.kood.org/howto:ffp
My guess is that you configured the system correctly, but failed to take the steps to make the changes permanent and survive a reboot.
In particular, if you go to the above URL and see "The root user" section, the paragraph starting "If you omit the usermod command..." explains what is going on. It may be the case that you did do the usermod to change the startup shell, but perhaps you forgot the store-passwd.sh command.
In any event, reviewing the above URL and redoing some of the configuration may help.
It is also always a good idea to test mods like these by rebooting the system right after you are done. That way, you remember what you were trying to do better than two weeks later.
DNS-323 FW 1.07 : 2 1TB WD Caviar Green SATA : fun_plug: utelnet + optware (no ffp)
Offline
#5 2010-10-06 22:23:54
- sirshadow
- Member
- Registered: 2010-10-06
- Posts: 7
Re: PuTTY is not working any more
I follow step-by-step this instructions, http://dns323.kood.org/howto:1st_steps
I will follow the pointed instructions and I will come back for updates.
10x a lot
Last edited by sirshadow (2010-10-06 23:11:23)
Offline