Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
Hi.
I've 2 disks attached:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: SAMSUNG Model: HD501LJ Rev: CR10
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: WDC Model: WD800JD-75MSA3 Rev: 10.0
Type: Direct-Access ANSI SCSI revision: 03
I made a 80 GB RAID 1 volume with both disks and the rest of the space in first disk, is used to MLDonkey and Samba repository. The current temperature of the box is 54ºC/129ºF and the disks never go to sleep (obviously).
What I want to do (if its possible) is put the second drive (80GB) in sleep mode until I need to access to the content, and the second drive (500GB) downloading and serving files.
First of all I put off the swap file in the RAID Volume, but it's the Volume_1 (/mnt/HD_a2) and I more clues to avoid the access to this Volume, by daemons or logfiles. MLDonkey is running at Volume_2 and logfile writing also to the same disk.
Sorry for my English
Regards from Spain
Offline
You are using RAID 1, so any data will be written into both disks, therefore it is normal that none of your disk can spin-down because MLdonkey keeps both of them busy.
In my case, I have two disks installed in the "separate/standard" mode, and mldonkey only keeps one disk busy and the other disk is spin-down most of the time.
Offline
Hi
I know. Actually the first drive spins down until I access it. I moved fun_plug and mldonkey to the second drive. Th eonly thing left is move .lpd dirctory to second drive changing the smb.conf file. But I don't know how make persistents the changes to smb.conf
Regards.
Offline