Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
I have searched through this forum the USB disk issues, without success.
Doe anybody have the same problem to mount a USB stick on my DNS-323? After carefully following the instructions in this forum and after trying the Fonz excelent fun_plugs I always come accross the same problem. The hardware seems to freeze and i have to reboot and even disconnect the cables in order to get it to work again.
I just bought the device and I immediately upgraded to version 1.0.3 and also installed the funplug-0.3
At the moment I one 250 Gb Samsung hard disk, but I would really like to be able to have an external USB disk attached to the system for backup purposes.
When I attach the USB disk my hardware just hangs without any messages. and I need to reboot it and turn off the power to get it to work again. As the machine hangs I will can't get any messages from the logs. (I don't have any serial interface)
Otherwise everything seems to work perfectly.
- Can it be an hardware issue with the USB intrface?
- Can it be some problems with the build in print drives, do I need to disable the printers?
Best regards
/Tomas
Offline
Just to be sure. The disk you attach has its own power supply?
Offline
See this thread http://dns323.kood.org/forum/t846-Disk- … issue.html
( more specific http://dns323.kood.org/forum/viewtopic. … 6087#p6087 )
Offline
Hello
I have now tried with a real USB hard disk (with external power) and it works! even though it shows up at /dev/sdb1. The funny thing is that my first attempts was done on three different USB sticks. The results where the same, they all caused the system to hang! So I guess that the power consuption was too high on the USB sticks!
Thank you for helping me!
Tomas
Offline