DSM-G600, DNS-3xx and NSA-220 Hack Forum
Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
Announcement
IRC Channel #funplug on irc.freenode.org
#1 2008-04-23 23:29:02
- satanicoPlan
- Member
- Registered: 2008-02-01
- Posts: 17
Installer cannot find DNS-313 on network
Hi all,
I've just ugpraded to a new Samsung HD103UJ 1 TB Hard drive. I have the DNS-313 attached to the network. Then I execute the installer from the CD but installation fails. It says that the DNS cannot be found, and suggets the cables are not attached or something.
If a change the hard drive and put the other I has before, all works like a charm. I don't know what is happening here.
By the way, I saw a notice in eBay from a guy who is selling a DNS-313 with exactly that Samsung hard drive, so someway it should work...!
http://cgi.ebay.com.au/1TB-Samsung-32M- … 8131a24115
I'm getting really lost. Some help, please?
Thanks! :-D
Offline
#2 2008-04-23 23:37:58
- naffarin
- Member
- Registered: 2008-01-28
- Posts: 47
Re: Installer cannot find DNS-313 on network
Did you hard reset the dns 313 after installing the new drive ?
Offline
#3 2008-04-24 09:46:30
- satanicoPlan
- Member
- Registered: 2008-02-01
- Posts: 17
Re: Installer cannot find DNS-313 on network
Hi,
I started changing the old for the new hard drive. Then I tried to do a reinstallation, following the instructions from de latest firmware (b12). Therefore I switched off the NAS, pressed the reset button, switched on and after a second, I realeased the reset button.
But there was no green light nor anything described in the manual or installer. The only light was the blue from the power button.
Maybe this is not the hard reset? Am I doing something wrong?
Thanks...!
Offline
#4 2008-04-24 10:36:14
- satanicoPlan
- Member
- Registered: 2008-02-01
- Posts: 17
Re: Installer cannot find DNS-313 on network
Hi!
I will try to give the more details I can.
After changing the drives I powered on the NAS (whitout reset of any kind). The only led lighted on is the blue from the button. Is this what it should be?
When connecting the NAS to the network, I tried this ways:
- Connecting the NAS to my LAN, which was 192.168.1.0.
- Changing my LAN to be 192.168.0.0.
- Connecting it directly to my Windows PC through a ethernet cable.
All without results. The installer didn't find the NAS. When trying to go to \\192.168.0.32\Volume_1 or http://192.168.0.32, nothing was found.
Then, since I wasn't getting any positive resoults, I removed the hard drive and connected to an USB hard drive case. When plugged to Windows, it didn't worked at first. In the hard drive tools it showed up but the drive was uninitialized. So I initialized it and created a single partition using NTFS format.
(How must the hard drive be in a fresh install in the NAS? Uninitialized, initialized, formatted? I'm a little confused :-S)
Then I plugged it back to the NAS and reapeated all the steps desribed above. Nothing happened.
Next step was trying a reinstall, as described in the installer. I tried the reset while powering on, as told in the post before. No signal of any reset going on. :-P
Plugged it and again nothing happened.
Arfff, I really don't know if it is the disk, the NAS or just my incompetence...
Thank you all for your help...!
Offline
#5 2008-04-24 22:15:05
- naffarin
- Member
- Registered: 2008-01-28
- Posts: 47
Re: Installer cannot find DNS-313 on network
Maybe you should try to delete all partitions on the new harddrive ( aka uninitialized). Shutdown the dns313, connect to ethernet, press the reset button and start the device. For me that worked when i was installing 1.0b6.
Offline
#6 2008-04-24 23:25:53
- satanicoPlan
- Member
- Registered: 2008-02-01
- Posts: 17
Re: Installer cannot find DNS-313 on network
I tried but nothing new under the sun... :-( No flashing light, no reset, nothing...
Now I'm considering to change the Samsung hard drive for a new Seagate that is reported to work well...
Offline
#7 2008-05-22 19:43:52
- SilentException
- Member
- From: Island of Krk, Croatia
- Registered: 2008-05-04
- Posts: 148
Re: Installer cannot find DNS-313 on network
did u managed to fix this? was it the samsung drive?
i have two HD103UJ waiting for their home (dns-323) but now i'm not sure if they are "not compatible"
is anyone using those samsung HD103UJ f1 1tb drives in dns-323 or 313?
D-Link DNS-323 v1.05 fun_plug-ed + many mods, 2 x 320GB Seagate Barracuda 7200.10 RAID0, Cat6 Gigabit Network, 9k Jumbo Frames, Average (WRITE): 19,32 MB/sec, Average (READ): 28,6 MB/sec
Offline
#8 2008-05-23 02:39:50
- richneo
- Member
- From: Singapore
- Registered: 2007-05-29
- Posts: 77
Re: Installer cannot find DNS-313 on network
i think i saw from other threads that their samsung drives cant work as well
2xDNS-323 ,1xDNS-313, 1xDNS-343
Offline
#9 2008-05-23 09:52:28
- CharminBaer
- Member
- From: Leipzig, Germany
- Registered: 2008-04-25
- Posts: 76
Re: Installer cannot find DNS-313 on network
Yes, itīs so. Samsung 750 and 1000GB definitely donīt work in the 313.
Dlink Germany explicitly points to this fact:
http://www.dlink.de/?go=gNTyP9CgrdFOIC4 … RH/I4JBdbu
About the 323 I canīt say anything.
Last edited by CharminBaer (2008-05-23 09:53:10)
DNS-313 / native running etch4.0r3...
and by now running lenny with all the features and no probs.
Offline
#10 2008-05-23 11:18:20
- SilentException
- Member
- From: Island of Krk, Croatia
- Registered: 2008-05-04
- Posts: 148
Re: Installer cannot find DNS-313 on network
thanks, i'll make a thread in 323 discussion to see if anyone is running that combo..
in meantime only thing i could google about "dns-323 and hd103uj" was this: http://cgi.ebay.de/2000GB-Samsung-Festp … dZViewItem
maybe they are compatible after all...
D-Link DNS-323 v1.05 fun_plug-ed + many mods, 2 x 320GB Seagate Barracuda 7200.10 RAID0, Cat6 Gigabit Network, 9k Jumbo Frames, Average (WRITE): 19,32 MB/sec, Average (READ): 28,6 MB/sec
Offline