DSM-G600, DNS-3xx and NSA-220 Hack Forum

Hi all,

First of all THANX to CharminBaer, you are my inspiration to keep my DNS-313 to live again.
I work with debian, and normally we use debian in our servers installations. So, work with debian
on the 313 is a dream jejejejejej.

I want to tell you what i have on my 313 now.

First of all, i download and then install CharminBaer debian version, 4.0 etch.

I upgrade thrue the debian Apt-get to debian LENNY. ALL FINE except
powermanagment. Now when i press the shutdown button it STOP the hard disk,
but never switch off the power like in etch. IDEAS????

After the debian update i start to install all what i need to have in my 313.

Like the original:
Samba
FTP
webmin
mt-daap

Extras: jejejejeje
asterisk

________________________________________

Problems i´ve  found during my installations:

Samba - no problem

Ftp - no problem

Webmin - ok, let me explain that. Webmin is a web-based interface for system administration for Unix.
Using any modern web browser, you can setup user accounts, Apache, DNS, file sharing and lot of servers daemons...
I seek at the debian repositry webmin, but there no package available, so i sent a mail to the developer (Jamie Cameron)
because the debian package at the webmin page don´t explain clearly if it could work under an ARM system.
He response to my mail:
"Yes, it will work fine - Webmin is entirely written in Perl, so as
long as you have Perl built for your ARM system, you will be able to
install and run Webmin."

Then i downlad the debian package from the webmin webpage, and after a little fight with
dependencies, webmin works fine in our dns-313. I know that install webmin could be "stupid" for all
the people who know debian and how to configure all the samba an other stuffs, but i want to try if it works...
And it works, not too fast but WORKS. And for all of you who don´t know how to configure a samba
file server, an ftp server and other stuffs, thats a good point to start. Once you install it, you can access
the webgui under https://DNS-313:10000

http://surfnet.dl.sourceforge.net/sourc … 30_all.deb


mt-daap - now known as FIREFLY, like in the orginal dlink firmware
With Firefly you to could serve the widest variety of digital music content over the widest range of devices(itunes, amarok,....).
Let me explain the problems i found with that. First i try to use the version of the mt-daap in the debian etch repository.
Because there´s no version of mt-daap under the lenny repository or i fail to found it. So i install the mt-daap package thrue
the apt. Ok all works fine, no problems with dependencies. I configure the mt-daap.conf and start the daemon. And inmediatelly
i see the server in my itunes as mt-daap on dns-313, IT WORKS. BUt... when i try to enter in the web gui the password
don´t work. After googling a little bit i found some people that said the version 0.2.4 have a bug with the web gui, the password
never works. So i decide to install a newer version. Probably you could go to the firefly page and compile and then install the application.
But i decide to do it trought the APT mode, easy for all of you who don´t know how to compile in debian.
So i search at the debian packages in the SID unstable version. Yes i know, i never recommend to install package from an unstable
repository, but in that case all the package that you could modify only affect to the Firefly server. So, i do it.
Yo can found the package and his dependencies at  http://packages.debian.org/sid/mt-daapd. After "wget"ting

libavcodec51_0.svn20080206-11_arm.deb    libflac8_1.2.1-1.2_arm.deb
libavformat52_0.svn20080206-11_arm.deb    libtheora0_1.0~beta3-1_arm.deb
libavutil49_0.svn20080206-11_arm.deb    mt-daapd_0.9~r1696-1.3+b1_arm.deb
libfaad0_2.6.1-3_arm.deb

It work like a charm, and much better than the dlink 0.2.4 version. You can access it on http://DNS313:3689
password: mt-daapd


EXTRA....
And now ASTERISK, for all of you who don´t hear about asterisk before it´s  the world's leading open source
PBXi, telephony engine, and telephony applications toolkit.  The company where i works is an Asterisk certified
partner, http://www.micropyme.com so i love asterisk and i use it all day. So the dns 313 it´s fantastic for that purpouse.
It´s tiny, it
I have my dns 313 asterisk configured to act as an voip gateway. I have two IP phones connected to the Asterisk
on the DNS313 and i can call trhue my asterisk to land lines and of course all the services asterisk bring.
Voicemail, Ivr, Call Waiting, Call Transfer, etc...
First of all i think the dns couln´t be powerfull to move asterisk, but it works for now.

Because of the lack of memory we have at the 313 i reccomend to stop the daemons of the
webmin and firefly. U could see here what i´m speaking about....

Tasks:  38 total,   1 running,  37 sleeping,   0 stopped,   0 zombie
Cpu(s):  1.0%us,  0.7%sy,  0.0%ni, 98.4%id,  0.0%wa,  0.0%hi,  0.0%si,  0.0%st
Mem:     29888k total,    28908k used,      980k free,     8576k buffers
Swap:  1020088k total,     9220k used,  1010868k free,     7188k cached

  PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND                                             
1240 root      16   0  2476 1132  932 R  1.3  3.8   0:00.28 top                                                 
1139 root      16   0  8508 1076  948 S  0.3  3.6   0:01.25 sshd                                                 
    1 root      16   0  2040  588  544 S  0.0  2.0   0:04.13 init                                                 
    2 root      34  19     0    0    0 S  0.0  0.0   0:00.00 ksoftirqd/0                                         
    3 root      RT   0     0    0    0 S  0.0  0.0   0:00.00 watchdog/0                                           
    4 root      10  -5     0    0    0 S  0.0  0.0   0:00.01 events/0                                             
    5 root      13  -5     0    0    0 S  0.0  0.0   0:00.09 khelper                                             
    6 root      10  -5     0    0    0 S  0.0  0.0   0:00.00 kthread                                             
   12 root      10  -5     0    0    0 S  0.0  0.0   0:00.00 kblockd/0                                           
   15 root      10  -5     0    0    0 S  0.0  0.0   0:00.02 khubd                                               
   40 root      15   0     0    0    0 S  0.0  0.0   0:00.07 pdflush                                             
   41 root      15   0     0    0    0 S  0.0  0.0   0:00.13 pdflush                                             
   43 root      18  -5     0    0    0 S  0.0  0.0   0:00.00 aio/0                                               
   42 root      15   0     0    0    0 S  0.0  0.0   0:00.53 kswapd0                                             
  657 root      10  -5     0    0    0 S  0.0  0.0   0:00.00 ata/0                                               
  659 root      11  -5     0    0    0 S  0.0  0.0   0:00.00 scsi_eh_0                                           
  662 root      11  -5     0    0    0 S  0.0  0.0   0:00.00 scsi_eh_1                                           
  672 root      17   0     0    0    0 S  0.0  0.0   0:00.00 mtdblockd                                           
  897 root      19   0     0    0    0 S  0.0  0.0   0:00.01 kjournald                                           
  960 root      15   0     0    0    0 S  0.0  0.0   0:00.00 egiga0                                               
1085 root      16   0  1712  572  504 S  0.0  1.9   0:00.24 syslogd                                             
1094 root      16   0  1636  364  324 S  0.0  1.2   0:00.08 klogd                                               
1105 messageb  16   0  2636  452  452 S  0.0  1.5   0:00.06 dbus-daemon                                         
1117 root      16   0  5340  508  508 S  0.0  1.7   0:00.01 sshd                                                 
1128 root      20   0  1892  468  468 S  0.0  1.6   0:00.02 inetd                                               
1141 root      16   0  8092  804  708 S  0.0  2.7   0:00.13 nmbd                                                 
1143 root      18   0 13216  852  820 S  0.0  2.9   0:00.22 smbd                                                 
1151 root      20   0 13216  172  168 S  0.0  0.6   0:00.01 smbd                                                 
1152 root      15   0  2992 1324 1128 S  0.0  4.4   0:00.23 bash                                                 
1157 mt-daapd  16   0 30612  824  732 S  0.0  2.8   0:00.26 mt-daapd                                             
1171 asterisk -11   0 34616 3336 2028 S  0.0 11.2   0:09.53 asterisk                                             
1185 avahi     16   0  2988  728  672 S  0.0  2.4   0:00.13 avahi-daemon                                         
1186 avahi     15   0  2988  244  216 S  0.0  0.8   0:00.01 avahi-daemon                                         
1210 root      16   0  2204  652  596 S  0.0  2.2   0:00.04 cron                                                 
1223 root      18   0  1420  320  264 S  0.0  1.1   0:00.05 pbutton                                             
1224 root      18   0  1412  292  272 S  0.0  1.0   0:00.06 fancontrol                                           
1234 root      16   0  1632  432  432 S  0.0  1.4   0:00.04 getty                                               
1239 root      16   0  9908 5176 1480 S  0.0 17.3   0:00.08 miniserv.pl             


jejejejej only 980k free RAM... We need a little bit of tunning of the process in the 313.....


That´s the question for CharminBaer and all the others debian hackers....

Now when i press the shutdown button it STOP the hard disk,
but never switch off the power like in etch. IDEAS????

Thanx in advance.

Sorry for the BRICK.

Poteck.