DSM-G600, DNS-3xx and NSA-220 Hack Forum

Unfortunately no one can be told what fun_plug is - you have to see it for yourself.

You are not logged in.

Announcement

#1 2009-04-25 17:11:02

laplace
New member
Registered: 2009-04-25
Posts: 4

Problem: Network fail

Hi!
I have bought a DNS-313. First time I run provided software an I could install everithing fine. It worked fine but... I saw that firmware was old (1.02) and I decided to upgrade. Upgrade failed and I decided to reinstall using provided software, but in this case 1.03. It worked and I could see that firmware was 1.03 but...

Testing that everithing works I reset it from web interface and now it doesn't work:

When I turn it on HDD light is blue and the networks light blinks for a few seconds, then it turn off.

I've tried to reinstall it using the CD (as I did the first time) but the instalation works until it have to restart the device. In that moment DNS313 restart but network led goes off and in a minute squeare blue light blinks.

It's there any way to restore it to default settings?
Thanks!

Offline

 

#2 2009-04-29 23:56:09

laplace
New member
Registered: 2009-04-25
Posts: 4

Re: Problem: Network fail

Problem solved!
I tried to restart it by hand pressing restart more than 30 seconds and since then it works fine.
I have instaled Transmission 1.52 and ssh.

Offline

 

Board footer

Powered by PunBB
© Copyright 2002–2010 PunBB