DSM-G600, DNS-3xx and NSA-220 Hack Forum

i use the lighttpd.conf-dns320 but i change for lighttpd.conf-with-php and i have ever the same problem !

I already said this in this thread it is a TYPO (mistake)

It needs to be  for the dns-320 : to punt in the fun_plug.init file (at the end)

# create custom server-Link to the folder
ln-s / mnt/HD/HD_a2/srv/ /srv

I managed to get everything to boot from the usb, how can one check if the harddisk goes to standby ?

I followed ui's guide but skipped the usbstorage stuff and the fun_plug scripting stuff. As it seems the usb support on the dns-320 is more advanced then the 323.

Also because I already had the fonz fun_plug installed on the harddrive

I needed to plug the usb after dns-320 was booted otherwise I couldn't format it, so I killed the fat32 partition and partitioned it with ext2 like guide says ( I used an 8gb kingston usb stick)

Then I copied over the entire FFP folder from /mnt/HD/HD_a2 to /mnt/USB/HD_c1


/mnt/USB/HD_c1  = USB mount point

Then I manually edited the fun_plug on the main harddisk to point to the usb like this :



original :
code:

"
# write a log, in case sth goes wrong
FFP_LOG=/mnt/HD/HD_a2/ffp.log
#FFP_LOG=/dev/null
"

Added below : (I just copied the ffp.log file even if empty it doesn't matter, it just checks if this file is accessable on the usb stick and if it is it transfers the log to the usb)

Code :
"
if [ -x /mnt/USB/HD_c1/ffp.log ]; then
    FFP_LOG=/mnt/USB/HD_c1/ffp.log
    echo "* Running USB DNS-320 DAV MOD ..."
    FFP_PATH=/mnt/USB/HD_c1/ffp   
    chmod -x /mnt/USB/HD_c1/ffp/start/LOGIN.sh
    chmod -x /mnt/USB/HD_c1/ffp/start/SERVERS.sh
    chmod 600 /mnt/USB/HD_c1/ffp/etc/ssh/ssh_host_dsa_key
    chmod -x /mnt/USB/HD_c1/ffp/etc/ssh/ssh_host_dsa_key
    chmod 600 /mnt/USB/HD_c1/ffp/etc/ssh/ssh_host_rsa_key
    chmod -x /mnt/USB/HD_c1/ffp/etc/ssh/ssh_host_rsa_key
    chmod 755 /mnt/USB/HD_c1/ffp/var/lib/sshd/
    chmod 755 /mnt/USB/HD_c1/ffp/etc/ssh/
fi
"

Al the other files in /ffp/start I moved these to another folder called disabled_usb_items

The problem I noticed is that the usb stick keeps resetting the permission, because of that you need to set them each boot time, and SSH was a bitch.

Due to safety reasons ofcourse.

And you need to point everything else also to the USB mount point...

Last edited by djbase (2011-01-16 15:43:06)

djbase wrote:

Woehoe, it goes to standby !!!! with the stuff I said in my previous post, even with Sabnzbdplus installed (logs and cache and NZB_Blackhole pointed to USB



pitty sabnzbdplus on the dns-320 is so slow, maybe the dns-325 would be a better candidate

You can check the temperature in the DNS-320 dlink homepage -> status Harddrive Info

And for the standby I checked it to connecting to the mount shares in windows, and if it lags I can hear the harddisk spin up and know it was in standby or hibernation mode.

Finally ...

Yea, for me the hand temperature test was the quickest of those alternatives.

Is the DNS-325 also fun-pluggable ?

Because linux  kernel seems same as DNS-325 except for the hardware ofcourse

Because it's really bugging me sabnzbd  plus is so slow :'(

Cool ! tnx for the info

And also rather dns-320 compatible ?

djbase wrote:

Cool ! tnx for the info

And also rather dns-320 compatible ?

I am assuming you mean the same architecture? If so the answer is yes. The main differences are Ram increase from 128 to 256mb, CPU clock speed increased from 800mhz to 1.2ghz. There are some other software differences however as far as compiling applications they should be cross-compatible.

@dlink tnx I meant archtitecture like you said, it's just that even the dns-320 is too slow to handle sabnzbd... maybe the dns-325 is...

Or does the sabnzbdplus run faster trhough debian on a dns-323....?

@roboroy, did you install OPEN-SSL ?

@robroy... Sorry, I can't help you, I don't know what's going on

I myself fucked lighttpd up again too :'( , it works but I installed NzbGet, this works too, but when I put in a login and password, I can't login anymore... strange PHP behaviours... :'(

Is the Midnight Commander workable under the DNS-320? Which version? Can I use it on the web interface? Or how?

Sorry for the many questions, I'm new in this.

starsailorz wrote:

Hello everybody

Does anyone know how to install ffmpeg ? (the exact commands in ssh coz I'm a newbie in Linux world ...)

Thanx a lot !

Yes, I know, depending on how many codecs you want support for you need to download some 50-80
different applications and libraries, it takes 12+ hours to compile it all.

The ffmpeg I got is fully featured (except for sun media lib and some Microsoft format) but it takes an hour to transcode 5 minute of a PAL format movie into HD sized format.

So using ffmpeg to "transcode on the fly" is not a solution for the NAS.

starsailorz wrote:

Is there a way to update Mediatomb ?

Thanx a lot !

You mean to get a newer version, yes it is, but you have to compile it up yourself


/Stefan

Last edited by stefanth (2011-04-07 15:52:47)

azlate wrote:

how cad mount /dev/sdb?
i have second hdd with data and i want to copy to first hdd until i will reformat

thx

This question was also asked (by you...) here and here and was also answered here and here. Sometime i think people will never understand, that this way of posting questions is not really polite.