Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
is this the final version of the 2.0 firmware
ftp://ftp.dlink.se/Products/dns-product … _v2.00.zip
Offline
that's interesting...maybe dlink can confirm this..btw ,is the release of dns-320 in north america postponed for some firmware issues or adjustment ?
Offline
I stated in another post somewhere that it was delayed 1 month but it is launching in April in NA. The firmware linked above should be final release.
Offline
Dlink wrote:
I stated in another post somewhere that it was delayed 1 month but it is launching in April in NA. The firmware linked above should be final release.
Will dlink release GPL sources for dns-320 in april , too?
thanks for the infos
Offline
Well they should be released for world wide but yes I usually try to get them up asap on our ftp site after product release.
Offline
uhu I just found this
ftp://ftp.dlink.fr/DNS/DNS-320/GPL/dns- … _v1.00_gpl(0216101012).tgz
they seems the sources for firmware 1.0..
Do they apply for firmware 2.0 too?
BTW I'm new to the forum, Dlink, I assume you are a dlink employee. are you ?
what country?
cheers
Offline
The majority of that GPL should apply to 2.0 as far as I know. The change to 2.0 was a UI change and the major components of the firmware remained the same. Yes I work at D-Link US.
Offline
Dlink wrote:
The majority of that GPL should apply to 2.0 as far as I know. The change to 2.0 was a UI change and the major components of the firmware remained the same. Yes I work at D-Link US.
thanks very much for the help and news
Offline
Hi Dlink,
Thanks for publishing the sources. I have found that a large portion of the build script (build_fw) in the archive has apparently been cut out (line 18 in the script):
//build_fw
tar zxvf arm-none-linux-gnueabi-6xxx.tgz
WORKDIR=$(pwd)
export WORKDIR
PATH=${WORKDIR}/arm-none-linux-gnueabi-6xxx/bin:$PATH
export PATH
CC=arm-none-linux-gnueabi-gcc
export CC
export CROSS_COMPILE=arm-none-linux-gnueabi-
CXX=${CROSS_COMPILE}g++
export CXX
RANLIB=arm-none-linux-gnueabi-ranlib
export RANLIB
LD=arm-none-linux-gnueabi-ld
export LD
STRIP=arm-none-linux-gnueabi-strip
export STRIP
// important stuff missing here
tar zxvf ramdisk.tgz
tar zxvf merge.tgz
cd merge
sudo cp ../ramdisk/uRamdisk .
./mergeIs there any chance you could publish the complete build script? Thanks!
Last edited by chris_cs (2011-03-28 01:02:41)
Offline
Dlink wrote:
Yes I work at D-Link US.
Nice, nice, very good to have you and Dlinks attention here for this forum.
I always buy Dlink stuff, routers, nas , switches etc. both private and in work, the stuff works right away,
you was among the first to have a WEB ui to control your devices, no need to install special programs on the P C as other require
(or even asked for money after 3 month period for the software as some did).
/Stefan
Offline