DSM-G600, DNS-3xx and NSA-220 Hack Forum

Unfortunately no one can be told what fun_plug is - you have to see it for yourself.

You are not logged in.

Announcement

#1 2012-01-20 19:13:33

kalosbg
New member
Registered: 2012-01-20
Posts: 1

How to unbrick DNS-313 rev B1 via Serial?

Hello,
i have bricked ns-313 REB-B1. I successfully connected with serial.
This is log when i power it on :

Code:

found magic num
found magic num
found magic num
 bootLoader made time: 1238800322
 bootLoader version: 2.00b08
 bootloader model name : dns-313v3
Waiting for disk ready & detect ...


found magic num
found magic num
found magic num
 bootLoader made time: 1238800322
 bootLoader version: 2.00b08
 bootloader model name : dns-313v3
Waiting for disk ready & detect ...
IDE 0 Detect disk 0
Disk Drive: IDE-0, Device-0, 2930277168 Sectors [UDMA6] 1500 GB 397 MB
Partition 1: HPFS/NTFS
Not found /.boot/zImage
 can not boot from ide


Processor: SL3512c3
CPU Rate: 300000000
AHB Bus Clock:150MHz    Ratio:2/1
MAC 1 Address: 00:26:5A:74:EC:EC
MAC 2 Address: 00:50:C2:22:22:22
inet addr: 0.0.0.0/255.255.255.0
Kernel RAM Location: 0x00600000  Filename: /.boot/zImage
Initrd RAM Location: 0x00800000  Filename: /.boot/ramdisk.bin.gz

Andge Test Code 0.03 (DAS Mode LED) ...
PHY 0 Addr 1 Vendor ID: 0x001cc912
==> enter ^C to abort booting within 2 seconds ......
send request to dcc
receive ack from dcc
send request to dcc
receive ack from dcc
send request to dcc
...

Can some body help me?

Offline

 

#2 2012-02-04 20:10:55

Electrocut
Member
From: France
Registered: 2009-04-05
Posts: 195

Re: How to unbrick DNS-313 rev B1 via Serial?

What make you think that your device is bricked?

It's seems like the firmware can't find your kernel + filesystem on your drive. Maybe you just need to hard reset your device, then use "ClicknConnect" software, to format your hard drive?


DNS-313

Offline

 

Board footer

Powered by PunBB
© Copyright 2002–2010 PunBB