DSM-G600, DNS-3xx and NSA-220 Hack Forum

I am having the same problems and the same reason. Someone used to using a DNS-323 so he turned on the prower button pressing it in not just touching it, now the router sees it for the first 30seconds as "Unknown" and assigns an ip address but I am unable to login to that address using web or through easy connect.

I am running windows7, not an emulator.
However, when I start click'n'connect, nothing happens, and I mean nothing. windows accesses the CD, the hard disk shows activity for a few seconds, then nothing. even after waiting. no program loaded, no message, nothing.


I am now getting solid green light for Harddrive, and blue light for lan flashing showing activity, but router doesn't recognize the device, and ip 192.168.0.32 is unable to connect.

At one time, the router assigned an 1p to the dns-313, when I set it up to assign IP, but identified the device name as "unknown". Tried to run click'n'connect same as above, tried to access the IP address through web, unable to connect and timed out.

Well mine turned out to be the strangest thing. It was listed on the router and was assigned an IP, but Pinging and web access was out.

Tried running click'n'connect but nothing happened, and I mean nothing. The program did not even display, cd light flashed a few seconds, HD access a few seconds but that was it.

Easy connect showed my DNS-323 but not the DNS-313.

Accidentily right clicked on the click'n'connect program and saw "run as administrator" - I am a two user windows7 account, with me as the administrator and already logged in as such, but I chose it anyway. Not sur why it didnt default to this or why a message hadn't come up.

Click'n'connect came up fine. Using a  250G Hitachi hard disk I went through the setup and format, but it locked up at the end. ended up unplugging the dns-313 and turning on again (power button wouldn't work). re-did the process as above and it worked fine, formatted completed and all is well.

Funny through, I had tried the reset on the back of the dns-313 before, but when I finally got the dns-313 up and running and looking through the settings, all the settings of the previous owner : accounts, ftp, and itunes server,  were still there. doesn't seem like the reset worked at all,

one thing i have noticed, comparing the 323 and the 313. the 313 seems to get a lot hotter when working. I transferred files (200 G) to the 313 from my notebook and the temperature of the 313 went up to and stayed consistently at 45 degrees (though the fan never clicked on), but the 323 when transferring 200 G to each hard drive at the same time the 323 reached only 42 degrees (running 2 X 1TB seagate 7200.12 Sata3 drives).

* fan on the 313 does work, because when hooked up as a USB disk it run on high non stop.