• Cut out the protective piece of plastic from the back plate, enlarged the opening, added some padding. After that the unit is MUCH more quiet
  ondro727's Fan Hack

• Fan does run all the time
• DNS-323
• Disk 1 spins up every 10 minutes
• DNS-323 Disassembly Pictures

Query and set the FAN Speed control
Usage: fanspeed [function]

Functions:
h show this help
w rpm, set fan speed(rpm range:1935~30000)
g get fan speed

fanspeed g

Returns the fan's current speed in rpm (revolutions per minute).

fanspeed w 2500

Sets the fan's speed to 2,500 rpm.

fanspeed w 0

Sets the fan's speed to 0 rpm (Stops the fan). The fancontrol process appears to restart the fan within a minute if it's running.

fanspeed w 30000

Not recommended! What happens!? Does anyone have the courage to report? : )

• What are the best ways to detect if the hard drive is in sleep mode (for use in a script)?
• Does anyone have the source?

\sys\crfs\sbin\fanspeed

Query and set the temperature sensor
Usage: temperature [function]

Functions:
h - show this help
w [1,2] degree - set temperature degree in register 1:Thyst 2:Tos
g [0~2] - get temperature in register 0:temperature 1:Thyst 2:Tos

temperature g 0

Returns the current temperature. Anybody know where the temperature probe is located?

temperature g 1

Returns the hysteresis Thyst register value/limit. Default setting = 75 degrees C / 167 degrees F.

temperature g 2

Returns the Overtemp shutdown Tos register value/threshold. Default setting = 80 degrees C / 176 degrees F.

• Does anyone have the source? (reverse engineered code: http://www.inreto.de/dns323/utils/)
• Is documentation essentially right?: Thyst & Tos Information - found by @galf
• Does anyone know whether 'temperature g 0' ever reports in Celsius? The wiki's first script seems to think so, but reports so far seem to point to the usage of Fahrenheit as standard.

\sys\crfs\sbin\temperature

Appears to be a daemon, running all the time by default.

• It appears to query the temperature and set appropriate fan speeds approximately every 60 seconds.
• Does anyone know what it does, exactly?
• Does anyone have the source? (reverse engineered code: http://www.inreto.de/dns323/utils/)

\sys\crfs\sbin\fancontrol

(thought it can be useful to you as it would to me as a newbie who is technically challenged. I'm new at this so please feel free to fix/edit)

1. Get a text editor like Notepad++ to save files in linux format (LF).
2. Create a new text file called fun_plug (no extensions), with the following line:/mnt/HD_a2/ctrl_fanspeed.shsave the text file to the root directory of your DNS-323 drive (e.g. X:/)(alternatively you can get fonz's fun_plug pack and add the above line at the end of the included fun_plug file)
3. create another text file, with the hands-on version of the fan-control script (copy and paste). Adjust the parameters to your liking, though it works fine without any modification. Save the file as ctrl_fanspeed.sh at the root directory (e.g. X:/) of your DNS-323 drive, same location as the fun_plug file.
4. Reboot the DNS-323 using D-Link's factory control page and you are done!

This is a crucial feature that D-link should have had from the start. It makes no sense to keep the fan running all the time, and I hope this makes it that much easier for most if not all DNS-323 users.

This simple script changes the speed of the fan based on the reported temperature. Note that this script only works if the temperatures are reported in celcius! By running temperature g 0 you can see what temperature-unit your box uses. The script will be update with a more general solution asap. The parameter-values are only given as examples. Make sure that the temperature of your box remain reasonable under different loads.

The script can be run in the background where it will remain active and periodically update the speed of the fan. To avoid clashes with the fancontrol process, it is probably best to kill it before this script is run.

#!/bin/sh
#
# ctrl_fanspeed.sh  Script for controlling the speed of the fan on an DNS-323
#
#At temperatures below T1 it sets the fan to RPM1, while at temperatures above T2 it sets it to RPM2. 
#At temperatures between T1 and T2 it linearly interpolates the speed of the fan from RPM1 at T1, to RPM2 at T2. 
#The temperature is checked every INTERVAL seconds.
 
INTERVAL=15
T1=40
T2=60
RPM1=1000
RPM2=6000
 
while [ 1 ]
do
  T=`temperature g 0|sed -n ' s/<temperaturertc>: get temperature =//p'`
  NEW_RPM=`expr  \( $T \> $T2 \) \* $RPM2 \| \( $T \< $T1 \) \* $RPM1  \| $RPM1 + \( $RPM2 - $RPM1 \) \* \( $T - $T1 \) \/ \( $T2 - $T1 \)` 
  fanspeed w $NEW_RPM 
  sleep $INTERVAL
done

A more “hands on” example of a script to control fanspeeds. As with the above, make sure that the parameters of the temperature and fanspeeds correctly corresponds to your box. Please read through the thread Fan does run all the time before you install this script.

#!/bin/sh
#
# This script was created at http://wiki.dns323.info by FIB,
# it has been slightly modified by leper (with help from
# fonz). It sets the fanspeed of the device depending on 
# the temperature, which is measured in Fahrenheit. If 
# your box measures temperature in Celsius, you need to 
# edit it to work.
# Additional changes by gartylad.
 
# Set the path to use RAM-disk instead of harddrive, to 
# execute from. This is done so that the disks will go
# into sleep mode, while the script is running.
PATH=/usr/bin:/bin:/usr/sbin:/sbin
 
# Create a logfile on the RAM-disk.
LOGDIR=/log
FANLOGFILE=${LOGDIR}/fan_ctrl.log
mkdir -p ${LOGDIR}
 
# Kill the old fan controller.
kill -9 `pidof fancontrol`
echo "Fancontrol killed. Installing fan_ctrl.sh" >${FANLOGFILE}
 
# With temps between T1 and T2, the script automatically
# lowers/raises the fanspeed between RPM1 and RPM2. This
# it does every update_interval seconds.
update_interval=60
T1=108
T2=140
RPM1=2300
RPM2=4500
 
while [ 1 ]
do
  T=`temperature g 0`
  T=${T##*=}
  # Check if temperature has fallen below T1 value
  if [ $T -lt $T1 ]; then
	# Temp below T1 fan stops
	CALCTEMP=`expr 0` 
  else
	# Temp above T1 fan starts
	CALCTEMP=`expr \( \( $T2 \< $T \) \* $RPM2 \) \| \( \( $RPM1 + \( $RPM2 - $RPM1 \) \* \( $T - $T1 \) \/ \( $T2 - $T1 \) \) \& \( $T \>= $T1 \) \)`
  fi
  CONVFTOC=`expr \( \( $T - 32 \) \* 10 + 9 \) \/ 18`
  newRPM=${CALCTEMP}
  fanspeed w $newRPM  
  echo `date`" ::CURRENT::" $T"F" ${CONVFTOC}"C -- fanspeed:" $newRPM "(written to "${FANLOGFILE}")." >>${FANLOGFILE}
  # wait for next cycle
  sleep $update_interval
done

• ADDA 40mm Fan Performance Curves
• Options (??not sure??)