Differences

This shows you the differences between the selected revision and the current version of the page.

--- howto:1st_steps 2010/01/05 01:01
+++ howto:1st_steps 2018/02/12 02:17 current
@@ Line 5: / Line 5: @@
 ----
-This guide suppose you use Unix/Linux desktop (altough, with very small effort it is usable for windows users as well, if using putty ssh/telnet application) with IP address **10.10.10.150**.
+This guide supposes you use Unix/Linux desktop (altough, with very small effort it is usable for windows users as well, if using putty ssh/telnet application) with IP address **10.10.10.150**.
 It is assumed that your NAS device is plugged into home network **10.10.10.0/24**, having DHCP server turned on.
@@ Line 41: / Line 41: @@
   * Check what IP address is assigned to DNS-323 (read it from your DHCP server, or try ping through DHCP range).
   * Put the DHCP assigned IP address into browser (assumed http://10.10.10.1)
@@ Line 56: / Line 57: @@
   * Wait 1-2 minutes, until browser reloads with new IP address to login window.
+  * Make sure there is at least one drive in the NAS and it has been formatted.
@@ Line 103: / Line 105: @@
   * Menu **Tools/System**, button [//Restart//]
   * Wait about 1-2 minutes after leds are constantly glowing again (time taken by fun_plug first installing)
 ===== Step 5. Enable SSH, disable Telnet =====
@@ Line 128: / Line 129: @@
   * Deactivate telnet <code>
+    root@joes_nas:~# /ffp/start/telnetd.sh stop
     root@joes_nas:~# chmod -x /ffp/start/telnetd.sh
-    root@joes_nas:~# reboot
 </code>
-  * Wait about 1-2min after leds are constantly glowing (this is the delay after which sshd will start)
-===== Step 6. Install repository for local use =====
+===== Step 6. Install repository for local use =====
 See at http://nas-tweaks.net/CH3SNAS:Tutorials/ffp-packages
 See at http://ffp.wolf-u.li/additional/
+**It appears that inreto.de is no longer accepting connections via rsync.** The following commands are no longer working. If they do not work for you, you can download the packages by some other means (such as wget).
 <code>
   $ ssh -l root 10.10.10.123
-    # cd /mnt/HD_a2/ffp/
+     cd /ffp/
-    # mkdir pkg ; cd pkg ; rsync -av --delete inreto.de::dns323/fun-plug/0.5/packages .
+     mkdir pkg ; cd pkg ; rsync -av --delete inreto.de::dns323/fun-plug/0.5/packages .
-    # rsync -av --delete wolf-u.li::ffp/additional .
+     rsync -av --delete wolf-u.li::ffp/additional .
-    # rsync -av --delete inreto.de::dns323/fun-plug/0.5/extra-packages .
+     rsync -av --delete inreto.de::dns323/fun-plug/0.5/extra-packages .
 </code>
+Note, if you are using the 0.7 version the command is:
+<code>
+rsync -av --delete inreto.de::dns323/fun-plug/0.7/XXXXXXXXXXXXXX/packages/
+</code>
+Were XXXXXXXXXXXXXX is the architecture of your NAS
 ===== Step 7. Install MidnightCommander =====
 <code>
-# cd /mnt/HD_a2/ffp/pkg/additional/app-misc ; funpkg -i mc-4.1.40-pre9-1.tgz
+# funpkg -i /mnt/HD_a2/ffp/pkg/additional/app-misc/mc-*.tgz
 </code>
 ===== Step 8. Install NTP Time synchronisation =====
+See a complete Tutorial at http://nas-tweaks.net/CH3SNAS:Tutorials/ntp
 See at http://wiki.dns323.info/howto:ffp (chapter NTP Network Time Protocol)
@@ Line 161: / Line 175: @@
     # ntpq -p
 </code>
+== Fix: HDD stand by issue ==
+It is recommended to change drift file path in ///ffp/start/ntpd.sh// file to ///tmp/ntp.drift//. Otherwise drive won't go to stand by anymore.
+@yozik04
+== Issue with DNS-313 ==
+[[http://forum.dsmg600.info/viewtopic.php?id=6157|ntpd seems incompatible with (some versions of?) DNS-313]]
 ===== Step 9. Install Lighttpd web server =====
+See a complete Tutorial at http://nas-tweaks.net/CH3SNAS:Tutorials/lighttpd
 See at http://wiki.dns323.info/howto:lighttpd_php (chapter Easy Ways )\\ See at http://wiki.dns323.info/howto:ffp (chapter Lighttpd Web Server)
@@ Line 177: / Line 197: @@
     # cp examples/lighttpd.conf /ffp/etc/lighttpd.conf
     # chmod a+x /ffp/start/lighttpd.sh
-    # sh /ffp/start/lighttpd.sh start
 </code>
+  * Change the user and group the daemon will run as (optional, more secure)<code>
+    # groupadd www-data
+    # useradd -g www-data www-data
+    # sed -i s/#server.username.*/'server.username             = "www-data"'/ /ffp/etc/lighttpd.conf
+    # sed -i s/#server.groupname.*/'server.groupname            = "www-data"'/ /ffp/etc/lighttpd.conf
+    # chown root:www-data /mnt/HD_a2/www/logs/
+    # chmod 774 /mnt/HD_a2/www/logs/
+</code>
+  * Start webserver <code>
+    # sh /ffp/start/lighttpd.sh start
+</code>
   * Test webserver \\ Navigate browser to http://10.10.10.123:8080 and read the page
-===== Step 10. Add PHP packages into to Lighttpd =====
+===== Step 10. Add PHP packages into to Lighttpd =====
+See a complete Tutorial at http://nas-tweaks.net/CH3SNAS:Tutorials/php
 See at http://forum.dsmg600.info/viewtopic.php?id=3466
-  * Install PHP <code>
+  * Install PHP (**fun_plug** 0.5) <code>
-    # cd /mnt/HD_a2/ffp/pkg
+    # funpkg -i /ffp/pkg/additional/dev-lang/php-*.tgz
-    # wget http://81.216.140.39/dns-323/mysql_and_php/php-5.2.6-mysql51-1.tgz
+    # funpkg -i /ffp/pkg/additional/net-misc/curl-*.tgz
-    # funpkg -i php-5.2.6-mysql51-1.tgz
 </code>
-  * Prepare webserver for PHP <code>
+  * Install PHP (**fun_plug** 0.7) <code>
+    # funpkg -i /ffp/pkg/packages/php-*.txz
+    # funpkg -i /ffp/pkg/packages/curl-*.txz
+</code>
+  * Prepare webserver for PHP (**fun_plug** 0.5 and **fun_plug** 0.7) <code>
     # cp /ffp/etc/examples/lighttpd.conf-with-php /ffp/etc/lighttpd.conf
+    # sed -i s/#server.username.*/'server.username             = "www-data"'/ /ffp/etc/lighttpd.conf
+    # sed -i s/#server.groupname.*/'server.groupname            = "www-data"'/ /ffp/etc/lighttpd.conf
+</code>
+  * Copy the php.ini file (**fun_plug** 0.5) <code>
     # cp /ffp/etc/examples/php.ini-dist /ffp/etc/php.ini
-    # echo "<? phpinfo(); ?>" > /mnt/HD_a2/www/pages/a.php
+</code>
-    # /ffp/start/lighttpd.sh restart
+  * Copy the php.ini file (**fun_plug** 0.7) <code>
+    # cp /ffp/etc/examples/php.ini-production /ffp/etc/php.ini
+</code>
+  * Build a test PHP page and restart lighttpd. (**fun_plug** 0.5 and **fun_plug** 0.7) <code>
+    # echo "<?php phpinfo(); ?>" > /mnt/HD_a2/www/pages/a.php
+    # sh /ffp/start/lighttpd.sh restart
 </code>
@@ Line 205: / Line 254: @@
-===== Step 11. Add MySql packages into to Lighttpd =====
+===== Step 11. Add MySQL packages into to Lighttpd =====
+See a complete Tutorial at http://nas-tweaks.net/CH3SNAS:Tutorials/Mysql
 See at http://forum.dsmg600.info/viewtopic.php?id=3466
-  * Install MySql <code>
+  * Install MySql (**fun_plug** 0.5) <code>
     # cd /mnt/HD_a2/ffp/pkg
     # wget http://81.216.140.39/dns-323/mysql_and_php/mysql-5.1.28-rc-1.tgz
@@ Line 215: / Line 270: @@
 </code>
-  * Prepare PHP for MySql <code>
+  * Install MySql (**fun_plug** 0.7) <code>
+ # funpkg -i /ffp/pkg/packages/mysql-*.txz
+</code>
+  * Prepare PHP for MySQL <code>
     # echo extension=mysql.so >> /ffp/etc/php.ini
     # echo extension=pdo.so >> /ffp/etc/php.ini
@@ Line 221: / Line 280: @@
     # vi /ffp/etc/php.ini
-</code> comment extension dir line <code>
+</code>
+Comment extension dir line. This line is under the //Paths and Directories// heading, which is 42% of the way through the file.<code>
     ;extension_dir = "./"
-</code> and below that, add extension dir with path /ffp/lib/php/extensions/no-debug-non-zts-20060613/ <code>
+</code>
+Below it, add a new extension directory path. (**fun_plug** 0.5) <code>
     extension_dir = "/ffp/lib/php/extensions/no-debug-non-zts-20060613/"
 </code>
-  * Prepare MySQL. Be careful, initial password setting is possible only at the first time <code>
+Below it, add a new extension directory path. (**fun_plug** 0.7) <code>
+    extension_dir = "/ffp/lib/php/extensions/no-debug-non-zts-20090626/"
+</code>
+  * Copy the my.cnf template. (**fun_plug** 0.5) <code>
     # cp /ffp/etc/examples/my.cnf /ffp/etc/.
-    # sh /ffp/start/mysqld.sh start
+</code>
-    # /ffp/bin/mysqladmin -u root password 'toor'
+  * Copy the my.cnf template. (**fun_plug** 0.7) <code>
-    # /ffp/bin/mysqladmin -u root -h joesnas password 'toor'
+    # cp /ffp/etc/examples/mysql/my-small.cnf /ffp/etc/my.cnf
+</code>
-    # mysql_install_db
+  * Edit the my.cnf template. Here is how it looks before editing. (**fun_plug** 0.7)
+<code>
+    # The MySQL server
+    [mysqld]
+    port		= 3306
+    socket		= /ffp/var/run/mysql/mysql.sock
+    skip-locking
+    key_buffer_size = 16K
 </code>
+  * This is what it should look like after editing. A //datadir// row has been added, and //skip-locking// has been changed to //skip-external-locking//. (**fun_plug** 0.7)
+<code>
+    # The MySQL server
+    [mysqld]
+    port		= 3306
+    socket		= /ffp/var/run/mysql/mysql.sock
+    datadir		= /ffp/var/lib/mysql
+    skip-external-locking
+    key_buffer_size = 16K
+</code>
+Create space for logs, then initialize the data directory. (**fun_plug** 0.7) <code>
+    # mkdir -p /srv/mysql
+    # mysql_install_db --datadir=/ffp/var/lib/mysql
+</code>
+Prepare MySQL. Be careful, initial password setting is possible only at the first time
+<code>
+    # sh /ffp/start/mysqld.sh start
+    # mysql_secure_installation
+</code>
   * Test MySQL local connection <code>
-    # /ffp/bin/mysql -uroot -ptoor
+    # /ffp/bin/mysql -uroot -p
       mysql> show databases;
       mysql> use mysql;
@@ Line 249: / Line 345: @@
     # sh /ffp/start/lighttpd.sh restart
 </code> Navigate browser to http://10.10.10.123:8080/a.php and see mysql section at the page
@@ Line 254: / Line 352: @@
 ===== Step 12. Allow remote connection to MySql =====
+See http://nas-tweaks.net/96/installation-and-configuration-of-mysql-on-fonz-fun_plug/#Allowing_external_access \\
 See http://www.cyberciti.biz/tips/how-do-i-enable-remote-access-to-mysql-database-server.html \\ See http://forums.mysql.com/read.php?108,62926,199511
   * Allow user 'root' to connect remotely, for instance to administrate MySQL with graphical tools (SQLYog mysqladmin) <code>
-    # /ffp/bin/mysql -uroot -ptoor
+    # /ffp/bin/mysql -uroot -p
-      mysql> GRANT ALL ON *.* TO root@'10.10.10.150'IDENTIFIED BY 'toor' ;
+      mysql> GRANT ALL ON *.* TO root@'10.10.10.150'IDENTIFIED BY 'put-your-root-password-here' ;
       mysql> FLUSH PRIVILEGES;
 </code>
   * Add new user with strictly defined rights <code>
-    # /ffp/bin/mysql -uroot -ptoor
+    # /ffp/bin/mysql -uroot -p
       mysql> INSERT INTO mysql.user
 ( HOST, USER, PASSWORD, select_priv, insert_priv, update_priv, delete_priv,  create_priv, drop_priv, reload_priv, shutdown_priv, process_priv,  file_priv, grant_priv, references_priv, index_priv, alter_priv, show_db_priv, super_priv, create_tmp_table_priv, lock_tables_priv, execute_priv, repl_slave_priv, repl_client_priv, create_view_priv, show_view_priv, create_routine_priv, alter_routine_priv, create_user_priv, event_priv, trigger_priv )
@@ Line 271: / Line 369: @@
       mysql> FLUSH PRIVILEGES;
 </code>Command allows user 'John' to login with password 'johnpwd' from any IP ('%'), and do defined activities (e.g. all, in this case). \\ \\ This command is just an example, DO NOT USE IT IN PRODUCTION ENVIRONMENT - IT IS TOO VULNERABLE !!! First, let 'Y' only with parameters you really need. \\ \\ Or better, forget about it, and connect DB with SqlYog software, where is better command  understanding in its GUI.

Differences

Views

Navigation

Personal Tools

Search

Toolbox