This is an old revision of the document!


1st little steps

This is a step-by-step guide on what can you do with your DNS-323 box, if you try fun_plug tweaking.

This guide suppose you use Unix/Linux desktop (altough, with very small effort it is usable for windows users as well, if using putty ssh/telnet application) with IP address 10.10.10.150.

It is assumed that your NAS device is plugged into home network 10.10.10.0/24, having DHCP server turned on.
It is assumed that your NAS device has gotten the 10.10.10.1 IP address from DHCP server (later this address will be changed to 10.10.10.123, or whatever by your choice).

Step 0. Clean from previous fun_plug

  • Attach shared root folder, and delete files ffp.log, fun_plug and folder ffp.
  • Alternatively you can telnet or ssh to nas, if you can.
        # cd /mnt/HD_a2
        # rm -r ffp
        # rm ffp.log
        # rm fun_plug
        # reboot 
    

Step 1. HW reset

  • Turn the device on and wait for leds constantly glowing. Then push thin wire to reset hole, hold for at least 10s, and release the wire.
  • Wait for leds constantly glowing again.
  • Check what IP address is assigned to DNS-323 (read it from your dhcp server, or try ping through DHCP range).
  • Put the DHCP assigned IP address into browser (assumed http://10.10.10.1)

Step 2. The very first init

  • Login (user:'admin', pwd:'')
  • Menu Setup/Wizard/, [Run Wizard]
    • [Next]
    • Enter admin password: 'adminpwd', [Next]
    • Enter timezone +1, [Next]
    • Switch to Static IP and fill with '10.10.10.123' address, [Next]
    • Name 'joesnas', [Next]
    • [Completed]
  • Wait 1-2 minutes, until browser reloads with new IP address to login window.

Step 3. Prepare Ftp server for FunPlug

  • Login to browser page
    http://10.10.10.123, user:'admin', password:'adminpwd'
  • Menu Advanced/UserGroups:
    User Name: 'joe'
    password: 'joepwd'
    [Add]
  • Menu Advanced/FTP Server:
    User: 'joe'
    Folder: 'Root' checked
    Permission: 'R/W Read/Write'
    [Add],
  • Client language: (choose what best fits to your country; in doubts use Unicode),
    [Apply]
  • [Start FTP Server]

Step 4. Install FunPlug with Telnet enabled

See details at http://wiki.dns323.info/howto:fun_plug (chapter Transfer using FTP)

  • In your linux desktop, make folder fp and cd to fp
     $ mkdir fp; cd fp
    
  • In fp folder, use FTP and put files into root folder
    $ ftp 10.10.10.123
    
      Name (10.10.10.123): joe
      331 User joe OK. Password required
      Password: joepwd
    
        ftp> cd Volume_1
        ftp> bin
        ftp> mput fun*
          mput fun_plug? y
         mput fun_plug.tgz? y
        ftp> chmod 777 fun_plug
        ftp> bye
    
  • Login to browser page
    http://10.10.10.123, user:'admin', password:'adminpwd'
  • Menu Tools/System, button [Restart]
  • Wait about 1-2 minutes after leds are constantly glowing again (time taken by fun_plug first installing)

Step 5. Enable SSH, disable Telnet

See details at http://nas-tweaks.net/CH3SNAS:Tutorials/fun_plug

  • Telnet to 10.10.10.123
  • Prepare root login
      / # pwconv
      / # passwd (enter 'adminpwd' as mentioned before)
      / # usermod -s /ffp/bin/sh root
      / # store-passwd.sh
    
  • Activate ssh
      / # chmod a+x /ffp/start/sshd.sh
      / # sh /ffp/start/sshd.sh start
    
  • Use ssh to connect from your machine (Linux assumed, but putty is possible also for Windows)
      $ ssh -l root 10.10.10.123
        root@10.10.10.123's password: 'adminpwd'
        root@joes_nas:~# 
    
  • Deactivate telnet
        root@joes_nas:~# chmod -x /ffp/start/telnetd.sh
        root@joes_nas:~# reboot
    
  • Wait about 1-2min after leds are constantly glowing (this is the delay after which sshd will start)

Step 6. Install repository for local use

See at http://nas-tweaks.net/CH3SNAS:Tutorials/ffp-packages See at http://ffp.wolf-u.li/additional/

  $ ssh -l root 10.10.10.123
    # cd /mnt/HD_a2/ffp/
    # mkdir pkg ; cd pkg ; rsync -av --delete inreto.de::dns323/fun-plug/0.5/packages .
    # rsync -av --delete wolf-u.li::ffp/additional .
    # rsync -av --delete inreto.de::dns323/fun-plug/0.5/extra-packages .

Step 7. Install MidnightCommander

# cd /mnt/HD_a2/ffp/pkg/additional/app-misc ; funpkg -i mc-4.1.40-pre9-1.tgz

Step 8. Install NTP Time synchronisation

See at http://wiki.dns323.info/howto:ffp (chapter NTP Network Time Protocol)

    # cd /ffp/etc
    # cp examples/ntp.conf .
    # chmod a+x /ffp/start/ntpd.sh
    # sh /ffp/start/ntpd.sh start
    # ntpq -p

Step 9. Install Lighttpd web server

See at http://wiki.dns323.info/howto:lighttpd_php (chapter Easy Ways )
See at http://wiki.dns323.info/howto:ffp (chapter Lighttpd Web Server)

  • Prepare www store
        # cd /mnt/HD_a2
        # mkdir -p www/logs www/pages
        # echo "<html> <head><title></title></head>" > /mnt/HD_a2/www/pages/index.html
        # echo "<body> Lighttpd is OK and running </body> </html>" >> /mnt/HD_a2/www/pages/index.html
    
  • Prepare server
        # cd /ffp/etc
        # cp examples/lighttpd.conf /ffp/etc/lighttpd.conf 
        # chmod a+x /ffp/start/lighttpd.sh
        # sh /ffp/start/lighttpd.sh start
    

Step 10. Add PHP packages into to Lighttpd

See at http://forum.dsmg600.info/viewtopic.php?id=3466

  • Install PHP
        # cd /mnt/HD_a2/ffp/pkg
        # wget http://81.216.140.39/dns-323/mysql_and_php/php-5.2.6-mysql51-1.tgz
        # funpkg -i php-5.2.6-mysql51-1.tgz
    
  • Prepare webserver for PHP
        # cp /ffp/etc/examples/lighttpd.conf-with-php /ffp/etc/lighttpd.conf
        # cp /ffp/etc/examples/php.ini-dist /ffp/etc/php.ini
        # echo "<? phpinfo(); ?>" > /mnt/HD_a2/www/pages/a.php
        # /ffp/start/lighttpd.sh restart
    

Step 11. Add MySql packages into to Lighttpd

See at http://forum.dsmg600.info/viewtopic.php?id=3466

  • Install MySql
        # cd /mnt/HD_a2/ffp/pkg
        # wget http://81.216.140.39/dns-323/mysql_and_php/mysql-5.1.28-rc-1.tgz
        # funpkg -i mysql-5.1.28-rc-1.tgz
    
  • Prepare PHP for MySql
        # echo extension=mysql.so >> /ffp/etc/php.ini
        # echo extension=pdo.so >> /ffp/etc/php.ini
        # echo extension=pdo_mysql.so >> /ffp/etc/php.ini
    
        # vi /ffp/etc/php.ini
    

    comment extension dir line

        ;extension_dir = "./"
    

    and below that, add extension dir with path /ffp/lib/php/extensions/no-debug-non-zts-20060613/

        extension_dir = "/ffp/lib/php/extensions/no-debug-non-zts-20060613/"
    
  • Prepare MySQL. Be careful, initial password setting is possible only at the first time
        # cp /ffp/etc/examples/my.cnf /ffp/etc/.
        # sh /ffp/start/mysqld.sh start
    
        # /ffp/bin/mysqladmin -u root password 'toor'
        # /ffp/bin/mysqladmin -u root -h joesnas password 'toor'
    
        # mysql_install_db
    
  • Test MySQL local connection
        # /ffp/bin/mysql -uroot -ptoor
          mysql> show databases;
          mysql> use mysql;
          mysql> show tables;
          mysql> select host, user, password from user;
    
  • Test MySQL presence in lighttpd server
        # sh /ffp/start/lighttpd.sh restart
    

    Navigate browser to http://10.10.10.123:8080/a.php and see mysql section at the page

Step 12. Allow remote connection to MySql

See http://www.cyberciti.biz/tips/how-do-i-enable-remote-access-to-mysql-database-server.html
See http://forums.mysql.com/read.php?108,62926,199511

  • Allow user 'root' to connect remotely, for instance to administrate MySQL with graphical tools (SQLYog mysqladmin)
        # /ffp/bin/mysql -uroot -ptoor
          mysql> GRANT ALL ON *.* TO root@'10.10.10.150'IDENTIFIED BY 'toor' ;
          mysql> FLUSH PRIVILEGES;
    
  • Add new user with strictly defined rights
        # /ffp/bin/mysql -uroot -ptoor
          mysql> INSERT INTO mysql.user 
    ( HOST, USER, PASSWORD, select_priv, insert_priv, update_priv, delete_priv,  create_priv, drop_priv, reload_priv, shutdown_priv, process_priv,  file_priv, grant_priv, references_priv, index_priv, alter_priv, show_db_priv, super_priv, create_tmp_table_priv, lock_tables_priv, execute_priv, repl_slave_priv, repl_client_priv, create_view_priv, show_view_priv, create_routine_priv, alter_routine_priv, create_user_priv, event_priv, trigger_priv )
                 VALUES 
    ( '%', 'john', PASSWORD('johnpwd'), 'Y', 'Y', 'Y', 'Y', 'Y', 'Y', 'Y', 'Y', 'Y', 'Y', 'Y', 'Y', 'Y', 'Y', 'Y', 'Y', 'Y', 'Y', 'Y', 'Y', 'Y', 'Y', 'Y', 'Y', 'Y', 'Y', 'Y', 'Y' );
    

    Command allows user 'John' to login with password 'johnpwd' from any IP ('%'), and do defined activities (e.g. all, in this case). This command is just an example, DO NOT USE IT IN PRODUCTION ENVIRONMENT - IT IS TOO VULNERABLE !!! First, let 'Y' only with parameters you really need. Or better, forget about it, and connect DB with SqlYog software, where is better command understanding in its GUI.


Navigation

Personal Tools