HOWTO Cleanboot

When you install fun_plug in your DNS-323 or CH3SNAS box, it runs most of the programs from the mounted hard disks, so it prevents them from being unmounted cleanly.

You have this problem if your dmesg shows the following line:

 EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended

Cleanboot will modify the reboot & shutdown process to overcome this issue, allowing you to cleanly reboot or shutdown your box.

telnet or ssh into your box, and issue the following commands:

 # wget http://pof.eslack.org/dns323/cleanboot-2.0.tgz
 # funpkg.sh cleanboot-2.0.tgz
 # ${FUNPLUGDIR}/start/cleanboot.sh start

telnet or ssh into your box, and issue the following commands:

 # wget http://pof.eslack.org/dns323/cleanboot-2.0.tgz
 # rm ${FUNPLUGDIR}/share/cleanboot/*
 # funpkg.sh cleanboot-2.0.tgz
 # ${FUNPLUGDIR}/start/cleanboot.sh start

telnet or ssh into your box and issue the command 'shutdown' or 'halt'.

NOTE: at the moment this is the only way to cleanly shutdown, if you do it either via the web panel or by pressing the button, the hard drives will not be cleanly unmounted.

There are several ways to reboot, all of them will umount the hard drives properly:

1. telnet or ssh into your box and issue the command 'reboot'.
2. issue a 'system restart' through the web administration panel
3. point your browser to http://your_nas_ip/goform/System_restart

There are two different methods to perform manual filesystem checks, choose the one you prefer:

1. http://forum.dsmg600.info/t1708-Modified-fun_plug-disk-maintenance.html
2. http://www.inreto.de/dns323/fsck/

http://forum.dsmg600.info/t1828-cleanboot-DNS-323-CH3SNAS.html

Enjoy