This is an old revision of the document!

Cross Compile Environment for DNS-323

Firmware 1.05

This was done with . Untar this tarball. You should find another one inside which holds the actual source. Untar that one as well.

tar vxf dns323_GPL_v1.05_05052008.tgz
cd dns323_GPL
tar vxf dns323_GPL.tgz
cd dns323_GPL

Host build environment

This was done with

  • gcc (GCC) 4.2.3 (Ubuntu 4.2.3-2ubuntu7)
  • bison (GNU Bison) 2.3
  • flex 2.5.34
  • gettext (GNU gettext-runtime) 0.17

To install these using apt do something like

sudo apt-get install gcc-4.2 bison flex gettext


The toolchain didn't quite compile out-of-the-box…

# untar everything
tar xzf uclibc-toolchain-src-20040609.tgz
cd uclibc-toolchain-src-20040609/gcc-3.3.x
# fix broken link
sed -i.old -e 's%' -e 's/gdb //' make/
# fix linux headers versioning
sed -i.old -e 's/UTS_RELEASE ­­­\\"2\.4\.21\\"/UTS_RELEASE \\"\\"/' -e 's/LINUX_VERSION_CODE 132117/LINUX_VERSION_CODE 132620/' make/
# do not build gdb.
# building gdb did not work for me. you might want give it a shot, if you really need the debugger..
# to do so just leave out these steps. if it fails, just retry from this point
sed -i.old 's/gdb #ccache$/# gdb #ccache/' Makefile
mv make/ make/
# build a clean toolchain
# if some error occurs, try to fix it, drop a note somewhere and redo these two steps
make dirclean
yes "" | make

Voila, you just have built your cross-compiler. Note: this does not compile with gcc-4.2, but works with gcc-3.4

Setting up build environment for cross-compiling

Use, which is in [], and fix the CWD variable to suit your needs.

Now you should be able to compile whatever you need.

For example:

# create a directory for this and copy all the files that you need there
mkdir ~/arm
cd ~/arm

# copy the toolchain_arm directory here. The directory is something like: dns323_GPL/dns323_GPL/uclibc-toolchain-src-20040609/gcc-3.3.x/toolchain_arm
cp -R $PATH_TO_DNS323_toolchain_arm .

# get the with bunch of other stuff. We only need
tar vxf fw103-scripts-0.3-2007-07-29.tar.bz2
cp fw103-0.3/ .

This is what looks like



# I've changed this line:
#export CROSSTOOLS=$CWD/crosstools/gcc-3.3.x/toolchain_arm
# to:
export CROSSTOOLS=~/arm/toolchain_arm

# compile-time


export BUILD="-Os -mtune=arm9e -march=armv5te"

export CROSS_TARGET=arm-linux-uclibc

export CC="${CROSS_TARGET}-gcc"
export CXX="${CROSS_TARGET}-g++"
export AR="${CROSS_TARGET}-ar"
export AS="${CROSS_TARGET}-as"
export LD="${CROSS_TARGET}-ld"
export RANLIB="${CROSS_TARGET}-ranlib"
export READELF="${CROSS_TARGET}-readelf"
export STRIP="${CROSS_TARGET}-strip"

Now, to compile your own program, do:

# right on the shell, copy paste the contents of the modified Someone correct me here if there's a better way to do this :)

# check the CC environment variable has been set
echo $CC

# output should be: arm-linux-uclibc-gc

# create a sample hello-world program:
echo '#include<stdio.h>
int main()
   printf("Hello, World\n");
return 0;
}' > hello.C

# now compile it
$CC -O2 hello.C -o hello

arm-linux-cc -O2 hello.C -o hello

# now copy the hello executable to your DNS-323, and try it there

# copy the binary to your DNS-323 and run it

Firmware ?.??

Please feel free to update, cleanup or correct this page

What is this? This document shows how to build the D-LINK DNS-323 GPL toolchain, kernel and u-boot loader

Things you will need first

  • Development System x86-based Debian-based Ubuntu Linux "Dapper Drake" (6.06)
  • You will need the following tools: bison flex gcc-3.4 byacc g++-3.4 gettext patch
    • Check your active compiler version with gcc -v
    • If your compiler is newer then gcc-3.4 then change the /usr/bin/gcc symlink to point to /usr/bin/gcc-3.4 for building the toolchain - restore it when you are done
    • If g++ is newer than version 3.4 also change the /usr/bin/g++ symlink accordingly.
  • Make sure libncurses5-dev is installed or you'll get termcap not found error
  • Create a directory to build your source in
mkdir GPL
  • Create a directory to download the sources into
mkdir GPL/zips
  • Change into the GPL directory
cd GPL
tar xzf build_dns323.tgz
  • Download the GPL sources:
  • Build the ARM UCLIBC toolchain

Fix the bug in the script build_uclibc: on line 24, replace .tar.gz with .tgz (obviously the extension of the tarballs changed)

The path to the gcc sources has changed, so we need to fix it:

tar xzf zips/uclibc-toolchain-src-20040609.tgz

edit the file: uclibc-toolchain-src-20040609/gcc-3.3.x/make/ Change the so that the path defined on line 23 reads:


Now, since we have already uncompressed the tar file, we comment out lines 23 and 24 of build_uclibc by adding a # to that start of each line.
Save the modified file, then run the script:


And now you must fix your symlinks. cd to $GPL/uclibc-toolchain-src-20040609/gcc-3.3.x/toolchain_arm/arm-linux-uclibc/lib and fix all broken links:

   for lib in crypt dl m nsl pthread resolv rt thread_db util; do ln -sf lib${lib}-* lib${lib}.so; done
   ln -sf

Note For each build script below - extract the corresponding file from the zips directory. Example:

   tar xzf zips/linux-

This creates a directory called linux- that build_kernel knows about.

  • Build the ARM kernel

fix bug in script build_kernel: on line 5, replace linux-2.6.6 by linux-

  • Build the u-boot loader. The script defaults to u-boot_1_1_1, but newer boxes use 1.7.3 - If you want to do so, you have to change the directory in the build_u-boot file accordingly and remove all .depend files from the u-boot_1_7_3 directory and its subdirectories.
  • Build busybox

The script needs a change; add line export CC=arm-linux-gcc, then execute.

  • Build at


The ./build_uclibc script creates a script called setpath that can be used to compile other ARM uclibc programs later on.

Many of the remaining D-LINK sources have not been configured for being cross-compiled. In fact, the “Readme.txt” file they supply with the GPL sources has instruction that are just plain wrong.


Personal Tools